Quick changeSDS converter for regular percussion …

1 20 Quick changeSDS converterfor regular percussion power toolsThis converter adapts regular percussion impact machines to receive SDS shank change of SDS shank tools through the axial sliding releasing all steel Power boxSDSCONVB1/2 x 2022283058 Blister card160 DIFFERENT WAYS OF APPLICATIONU tensile a percussioneAttacco filettato maschio 1/2 x 20 Mandrino SDSCONVR accordo magneticoRACSDSIHI nserto per avvitarePunta aforare SDSR accordo RACSDSV1 Punta a forare tradizionaleGhiera per cambio punta SDSADBC1/2 x 20 threadReleasingringStandard drillSDS adaptor RACSDSV1 Realising ringScrewdriver bitSDS drillScrewdriver adaptorRACSDSIHSDS converter SDSCONV1/2 x 20 threaded nosePercussion power tool21 Drilling and screwing bitsquick change holder setTool set includes 1/4 Quick release chuck with 3/8 hexagon shank to be fitted in a power tool and three unique drill and drive bit combinations which enable easy and fast way to change tool for drilling hole and card90 Punta a forare di diametro2,5 mm3,0 mm4,0 mmAttacco esagonale 3/8 Mandrino porta inserticon attacco esagonale maschio1/4 DIN 3126 - Forma E Hexagon shank1/4 DIN 3126 - E FormQuick release chuckDrill bit mm2212435newDescriptionSimply convert the standard cordless, electric.

2 Pneumatic drill / driver into a blind rivet gun. Accept 3/8 and ( 10/13 mm) drill chuck or "( ) hex recess. Compatible with 12V, and 18V cordless drill / driver and any reversible corded drill I driver. Pull:Aluminum - mmStainless steel rivets: - mm Comes complete mm (3/32" - 1/8"- 5/32" - 3/16" ) 4 nosepieces. Max rpm: 1000 rpm. The shank of rivet is expelled when the drill is operated in the "reverse" mode. If used with a combine impact drill, ensure that it is set to drilling shank Din 3126 Form E 2 Housing: plastic material3 Nosepiece: mm window: Blind rivet loading5 Wrench with interchangeable nosesModel rivetssize mmSteel rivetssize mmMaximumspeedPackagingstyleWeightgRIVCO NV1/4 DIN 3126 Form E upto upto rpmIndividual box280 Rivet converterDRILL CHUCKS & POWER TOOL ACCESSORIES MANUFACTURER SINCE 193623 Chuck box55 RACSDSV1 BBOSCHB lister card55 SDS+RACSDSMAKBMAKITAB lister card50 RACSDSIH magneticBOSCHBulk50 RACSDSIHBSDS+Blister boxRAC3812 MBBlister card26 RAC3838 MIndividual boxRAC3838 MBBlister box11 RAC3812 FBBlister left hand thread spare screw total lenght 18 mmfor use with 10 mm 3/8 x 24 threaded keyed chucksM6 left hand thread spare screw total lenght 23 mmfor use with 10 mm 1/2 x 20

3 Threaded keyed chucksM6 left hand thread spare screw total lenght 27 mmfor use with SDS adaptors and 13 mm 1/2 x 20 threaded keyed chucks To convert 1/2 x 20 female to 3/8 x 24 male To convert 3/8 x 24 female to 3/8 x 24 male To convert 1/2 x 20 female to 3/8 x 24 femaleDRILL CHUCKS & POWER TOOL ACCESSORIES MANUFACTURER SINCE 1936To convert SDS and other direct drive systems to accept 1/2 x 20 female chuck for rotary only workSupplied complete with M6 left hand threaded retaining screwTo convert SDS system to accept tools with 1/4 hexagonshanks for rotary rotation work24 DRILL CHUCKS & POWER TOOL ACCESSORIES MANUFACTURER SINCE hexagon adaptor to 3/8 square wobble type adaptor locked: straight position unlocked: wobble position up to 25 x 20 thread to 3/8 square driveConvert x 20 thread to square be fitted on square drive machineTo be fitted on 3/8 square drive machineRAC14 HSQ12 BTo be fitted on square drive machineRAC14HT38 BTo be fitted on 3/8 x 24 threaded mount machineRAC14HT12 BTo be fitted on x 20 threaded mount machineQuick release hexagon bit holdersChuck adaptorsnewnewnewnew