Quicklub Lubrication Systems - Lincoln Industrial

1 Quicklub Lubrication Systems26 Divider Valve Mounting AccessoriesModel mounting bracket51304 " nylon locknut for valve mounting247023 Grade 8, " valve mounting bolt239499 Template for divider valve mounting (6, 8, 10 and 12 outlet valves)252807 Valve mounting block for welding2499876mm bolt to be used with the 252807272569 Lock washer for valve mountingStandard Compression Fittings for Steel or Nylon TubingModel " tube x " NPT male straight fitting241293 " tube x " NPT male 90 fittingDivider Valve Outlet Adapters for " Steel or Nylon Tubing Compression-Style With Check ValveModel "404-22602-1 Compression nut504-31606-3 Check valve body404-22581-2 FerruleDivider Valve Outlet Adapters for " Steel or Nylon

2 Tubing Compression-Style Without Check ValveModel Compression nut404-23668-1 Compression nut (stainless steel)404-22581-2 FerruleDivider Valve Outlet Adapters for " HoseModel Ferrule239857 Valve outlet adapter with check ( " NPT female)239959 Valve outlet adapter without check ( " NPT female)For SSVM Valves Compression FittingModel Line Connection13112 Compression nutBrass " Steel or Nylon Tube419-22990-1 Adapter419-22618-2 Ferrule519-30583-1 Check valve bodyNOTE: Quicklub adapters without check valves are for use in oil Systems with open tube (minimal backpressure).

3 Quicklub adapters with check valves are for use in all automated , Adapters and AccessoriesQuicklub Lubrication Systems27 Fittings, Adapters and AccessoriesZerk-Lock and Quicklinc Make Connecting FastQuicklinc line connectors and adapters link metering valves and flexible Lubrication lines. Outlet adapters with check valves are used in automated Systems , while models without a check valve are used in manual Systems called single point kits where a divider valve connected to several Lubrication points is fed with a grease Quicklinc tube splicer union is a great way to fix a broken line without replacing the whole line.

4 Just clean the line ends, plug them into the connector and the line s lube point connectors are ideal when fittings can be removed easily. All three varieties straight, 90-degree elbow and elbow swivel connect much faster than using a typical screw connector, which requires assembly of four is Lincoln s other great time-saving connector. When removing a fitting is not practical, the Zerk-Lock grease fitting adapter is the answer. It connects any 1 8-inch male tube adapter directly to a grease fitting.

5 Even when a fitting is self-tapered or pressed in, there s no need to drill it out and tap new threads with Zerk-Lock a tremendous time and Zerk-Lock are designed to work well together. It s as simple as:Quicklinc Push-In Style Fittings for Nylon TubingDivider Valve Outlet Adapters for " Nylon Tubing Quicklinc Push-In StyleModel Valve outlet fitting with check M10x1 thread244884 Valve outlet fitting without check M10x1 threadDivider Valve Outlet & Inlet Adapters for " Hose Quicklinc Push-In Style with CheckModel Valve outlet fitting with check.

6 Use with 272401 and 272394 hose stud. M10x1 thread272659 " NPT male straight fitting. Use with 272401 and 272394 hose " tube x " NPT male straight fitting244048 " tube x " NPT male 90 fitting243699 " tube x " NPT male 90 swivel fitting244053 " tube x -28 male 90 swivel fitting244054 " tube x -28 male 90 fitting244055 " tube x -28 male straight fitting244056 " tube x 6x1 mm male 90 fitting244057 " tube x 6x1 mm straight fitting244058 " tube x " tube splicer unionIMPORTANT.

7 Use the valve adapters for connecting the " high pressure hose (incl. hose stud with groove) to the main divider valve. The collet of the adapter is not knurled and has a wide Protective Quicklinc rubber boot1. Install a Quicklinc into the divider valve and insert the line2. Place a Zerk-Lock onto the fitting3. Seal and tighten Zerk-Lock using a hammer and staking tool4. Then thread a Quicklinc completely into the Zerk-Lock5. And plug the tube into the Quicklinc adapterQuicklub Lubrication Systems28 Divider Valve Outlet Closure PlugModel Valve outlet closure plug (gasket not required)303-19346-2 Stainless steel outlet closure plug (gasket not required) " Supply and Feed Line HoseMin.

8 BurstLube Working Pressure Nominal SizeMinimum Bending ,000 psig 690 bar4000 psig 276 bar " "3 "Nylon Tube Dacron Braid Polyurethane Cover-40 F to +212 FHose Ends for Use with Quicklinc Fittings for " ID HoseModel stud, 90 (to be used with 272427)272401 Hose stud, straight (to be used with 272427)272427 Threaded sleeve274238 Stainless steel hose stud sleeve274239 Stainless steel straight hoseHose Ends for " HoseModel " NPT swedge on hose stud (Requires swedging tool)246002 " NPT field installable hose coupling (swedging tool not required)276954 " NPT swedge on hose fitting with swivel (requires swedging tool)Hose End Connecting ToolsModel Swedging Tool274062 Hand vise for quick connect and reusable hose endsFeed Line Nylon TubingFittings, Adapters and AccessoriesModel Thickness in.

9 / mmWorking Pressure Minimum Bending 25 m coil grease filled " / 625 .875 / F to +150 F242050 50 m coil grease filled62357 100 m coil non-grease filled247022 500 m coil non-grease filled274047 25 m coil grease filled " / 500 / F to +200 F274048 50 m coil grease filled274049 100 m coil non-grease filled274050 500 m coil non-grease filledModel ( " ID hose)24128626 ft. ( m) coil grease filled24128735 ft. ( m) coil grease filled24128840 ft. ( m) coil grease filled252717200 ft ( m) coil non-grease filled2772262250 ft.

10 ( m) spool non-grease filled27639540 ft. ( m) grease filled with quick wrap protection installed on hoseNOTE: Burst pressure 2500 psi (172 bar) Quicklub Lubrication Systems29No. 51055 Steel TubingModel ( x Wall)Working .020"25 m 4400 psig / 300 barCoilNylon TubingModel ( x Wall)Working PressureMinimum Bending ".026"25 m625 psig / "62278100 m62956500 ft/152 mPipe Thread AdaptersBulkhead AdaptersModel " PTF " / mm " -28 " / mm140541 " PTF " / mm " -28 " / mm131552 " PTF " / mm " -28 " / mm2442251 " NPT " hex " NPT "Model " NPT male x " NPT male nipple10181 " NPT male x " NPT female adapter, 1 " long10182 " NPT male x " female adapter, " long145622 outlet " NPT x " NPT junction block145634 outlet " NPT x " NPT junction block81583 Junction Block.