Reference Manual - E-Tronics

1 EcoCut 3300 Automatic Cutting MachineReference ManualSoftware Version |Edition (10-2013)Address / distributors2|108 Reference Manual |Edition (10-2013) |EcoCut 3300 Schleuniger AGBierigutstrasse 93608 ThunSwitzerlandP +41 (0)33 334 03 33F +41 (0)33 334 03 Schleuniger AGGesch ftsbereich SolutionsGewerbestrasse 146314 UnteraegeriSwitzerlandP +41 (0)41 754 53 53F +41 (0)41 754 53 GmbHRaiffeisenstrasse 1442477 RadevormwaldGermanyP +49 (0)21 959 29-0F +49 (0)21 959 Schleuniger, Colin DriveManchester, NH 03103 USAP +1 (603) 668 81 17F +1 (603) 668 81 Schleuniger Japan Co., , Tokai, Ota-kuTokyo 143-0001 JapanP +81 (0)3 57 55 80 41F +81 (0)3 57 55 80 Schleuniger Trading (Shanghai) Co., , BH Center7755 Zhongchun RdShanghai, 201101 ChinaP +86 (21) 62 52 66 77F +86 (21) 62 40 86 2013 SchleunigerEN | ID-0000000138-001 Part #:Order #:Table of contentsReference Manual |Edition (10-2013) |EcoCut 33003|108 TABLE OF CONTENTS1 GENERAL.

2 DATE / PRODUCT TYPE .. ABOUT THE OPERATOR'S HANDBOOK .. of the SYMBOLS AND LEGEND .. and OF CONFORMITY .. OF LIABILITY .. STATEMENTS AND POLICIES .. PROTECTION .. PARTS ..122 SAFETY NOTICES .. SAFETY NOTES .. OF DANGER / RISKS .. USAGE OF PRODUCT .. SYMBOLS .. symbols used in symbols on the AND RETROFITTING .. QUALIFICATION .. PROTECTIVE EQUIPMENT .. cap or safety INSTALLATIONS ..163 TRANSPORT / PACKAGING / STORAGE INSPECTION .. / LOADING .. packaging 17 Table of contents4|108 Reference Manual |Edition (10-2013) |EcoCut TRANSPORTATION ..184 PRODUCT SPECIFICATIONS / WEIGHT .. SPECIFICATIONS .. ON THE INSTALLATION LOCATION .. PLATE ..205 PRODUCT DESCRIPTION .. ELEMENTS .. setting of gap knob for ejection end end switch entry / CONNECTORS.

3 Interface (PPI, option).. 232 (HotStamp/Prefeeder) power ZONES ON THE MACHINE .. zones operating zones 286 INSTALLATION / FIRST COMMISSIONING INSTRUCTIONS .. APPLIANCES .. / PUTTING INTO OPERATION .. and setting the measuring unit and the menu compressed air (option).. 307 GENERAL HANDLING / OPERATION TOPICS FOR THE OPERATION .. ON .. OFF ..31 Table of contentsReference Manual |Edition (10-2013) |EcoCut 33005| .. a THE ENTRY GUIDE .. TO BE DONE AFTER OPERATION .. maintenance 348 OPERATION OF THE CONTROL SOFTWARE OPERATOR PANEL .. MENU .. SCREENS .. data data stacker (PPI, option).. coiler (PPI, option).. MENU .. RESTRICTION .. level 529 OPERATION USING A MARKING DEVICE FOR WIRE MARKING.

4 THE WIRE MARKER UNIT .. the 53 Table of contents6|108 Reference Manual |Edition (10-2013) |EcoCut 330010 DIAGNOSTICS / TROUBLESHOOTING FAULT LOCALIZATION .. in case of an INDICATORS .. / CIRCUIT DIAGRAMS / FLOW CHARTS .. MESSAGES .. AFTER SOLVING ERRORS ..5811 MAINTENANCE / MAINTENANCE SCHEDULE INSTRUCTIONS .. protective SERVICE .. in case of an .. SCHEDULE .. DIAGRAMS, DRAWINGS, SPARE PART LISTS .. OF SPARE PARTS .. MAINTENANCE WORK .. the back to factory / REPAIR WORK .. / the feed mains 7312 SPARE PARTS / EXPLODED VIEW DRAWINGS 7313 DECOMMISSIONING / DISPOSAL .. / DISPOSAL ..75 Table of contentsReference Manual |Edition (10-2013) |EcoCut 33007|10814 APPENDIX UPGRADE .. Iguana .. upgrade HS / PF.

5 Use with a use with a INTERFACE (PPI, OPTION) .. DIAGRAM .. GREASE MICROLUBE GBU-Y 131 ..91 INDEX 105 Table of contents8|108 Reference Manual |Edition (10-2013) |EcoCut 33001. GeneralReference Manual |Edition (10-2013) |EcoCut 33009|108 GENERALT hank you for your trust in the Schleuniger technique! You have acquired a high performance Schleunigerproduct, designed and manufactured in our factory to your needs. Read through this Manual with duecare and attention. It contains important tips and safety instructions, which allow precise and reliablewire/cable this Manual , Schleuniger AG Thun, Switzerland is referred to as manufacturer and abbreviated with Schleuniger .Schleuniger AGPhone: +41 (0)33 334 03 33 Bierigutstrasse 9 Fax: +41 (0)33 334 03 343608 ThunEmail: DATE / PRODUCT TYPESee EG-Declaration of Conformity (Register 2) of the ring ABOUT THE OPERATOR'S HANDBOOK The Operator's Handbook is part of the product and contains all the relevant information necessary tooperate the product efficiently and safely as intended.

6 The mentioned safety notes and directions and as for the application field valid local accident preven-tion regulations and general safety regulations must be complied. If the product changes hands, the Operator's Handbook must be supplied to the new owner. Make sure to update any relevant safety changes and corrections to the Operator's Handbook whichare available. Ask your local Schleuniger distributor for of the manualGeneralEach person using the product must be properly trained and have read and understood the Operator'sHandbook. This is also imperative, even when the respective person has operated such a product or simi-lar previously and where they have been trained by the Operator's Handbook is no longer valid, if any of its contents (except a Quick Start Card, where availa-ble) are removed or is changed on the data storage Operator's Handbook we declare: In printed form the entire content of the folder according to the contents table.

7 In electronic form, this Reference Manual , and the document Parts Catalog .ConstructionWe are trying to make the operation of our products as easy as possible. To achieve this we have devel-oped a concept for the Operator's Operator's Handbook consists of at least three parts:1. General10|108 Reference Manual |Edition (10-2013) |EcoCut 3300 Quick Start Card (optional)The Quick Start Card is available as a quick Reference to take out of the ring binder. It is meant for the user(operator), which is operating the product daily. See chapter " Personnel classification (Page 15)". Reference ManualA detailed description for the product and all options with full explanation of all functions available andthe maintenance. The Reference Manual is meant for the beginner as well as for the experienced user(qualified personnel) as a learning- and Reference guide.

8 See chapter " Personnel classification(Page 15)".Parts catalogA Manual with the most important components of the product including the available options and thewear parts. This part of the Operator's Handbook is intended mainly for the technical specialist. See chap-ter " Personnel classification (Page 15)". Operator's Handbook must be available to the operating personnel at all times. Keep the Operator'sHandbook in such a way that it will not become damaged, so that the contents will remain clearly legiblebeyond the expected lifespan of the This Operator's Handbook must be kept near the product. It must be available to the operating per-sonnel at all time. Always follow the instructions in this Operator's Handbook fully and without SYMBOLS AND and hintsThe listed pictograms have the following meaning in the Operator's Handbook:Tip:Application note and other useful infor-mation which improves the intended uti-lization of the :Information which helps to operate theproduct efficiently and :Overview diagram, introduction level:Sub-screen with indication of the screenlevel (viewed from main menu).

9 Procedure:Important activity direction, program-ming Reference :Referencing of text to picture elements in aprevious :Important safety relevant :Waste that must be recycled and not bedisposed of with household GeneralReference Manual |Edition (10-2013) |EcoCut 330011| , button, pictogramCommands and operating areas on the screen are in the text shown in bold,squared brackets and capital letters [KEY].Screen title/menuScreen titles and menu names are represented in the text in "inverted com-mas".Electric signal nameSignal names are marked in capital letters and in "INVERTED COMMAS".Cross referencingCross referencing is indicated in the text in color and italics, e. g. see chapter" Legend (Page 11)".Activity directionActivity direction (installation procedure, programming example and others)requests the user of the product to take an action.

10 The activity direction ismarked with a digit and an arrow 1 .Consequence of anactivity directionDescriptions and affected actions in activity directions are marked with theprefix .MeasureMeasures in the manuals are given in OF CONFORMITYSee document EG-Declaration of Conformity (Register 2) of the ring OF LIABILITYThe content of these operating instructions was put together taking into consideration the current stand-ards and guidelines according to the state of the technology and our many years of manufacturer disclaims any liability for damages and accidents as a result of: Disregard of the instructions Disregard of warning notices Non-intended STATEMENTS AND POLICIESSee Schleuniger document General Conditions of Sale and Delivery . PROTECTIONKeep this Operator's Handbook confidentially.