Example: stock market

Reinforced Concrete Design to EuroCode 2 (EC2)

Reinforced Concrete Design to EuroCode 2 (EC2) Other titles of interest to civil engineers Civil Engineering Contract Administration and Control, 2nd edition I. H. Seeley Civil Engineering Materials, 4th edition N. Jackson and R. Dhir (Editors) Fundamental Structural Analysis W. J. Spencer Reinforced Concrete Design , 4th edition W. H. Mosley and J. H. Bungey Soil Mechanics-Principles and Practice G. Barnes Structural Mechanics J. Cain and R. Hulse Surveying for Engineers, 3rd edition J. Uren and W. F. Price Understanding Hydraulics L. Hamill Understanding Structures Derek Seward Reinforced Concrete Design TO EuroCode 2 (EC2) W. H. Mosley Nanyang Technological University, Singapore R. Hulse Coventry University and J. H. Bungey University of Liverpool W. H. Mosley, R. Hulse and J. H. Bungey 1996 All rights reserved. No reproduction, copy or transmission of this publication may be made without written permission. No paragraph of this publication may be reproduced, copied or transmitted save with written permission or in accordance with the provisions of the Copyright, Designs and Patents Act 1988, or under the terms of any licence permitting limited copying issued by the Copyright Licensing Agency, 90 Tottenham Court Road, London W1P 9HE.

vi CONTENTS 4.6 Flanged Section in Bending at the Ultimate Limit State 80 4.7 Moment Redistribution and the Design Equations 87 4.8 Bending Plus Axial Load at the Ultimate Limit State 92 4.9 Rectangular-Parabolic Stress Block 103 4.10 Triangular Stress Block 106 5 Shear, Bond and Torsion 113 5.1 Shear 113 5.2 Anchorage Bond 125 5.3 Laps in Reinforcement 129

Tags:

  Concrete, Reinforced, Moment, Reinforced concrete

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Reinforced Concrete Design to EuroCode 2 (EC2)

1 Reinforced Concrete Design to EuroCode 2 (EC2) Other titles of interest to civil engineers Civil Engineering Contract Administration and Control, 2nd edition I. H. Seeley Civil Engineering Materials, 4th edition N. Jackson and R. Dhir (Editors) Fundamental Structural Analysis W. J. Spencer Reinforced Concrete Design , 4th edition W. H. Mosley and J. H. Bungey Soil Mechanics-Principles and Practice G. Barnes Structural Mechanics J. Cain and R. Hulse Surveying for Engineers, 3rd edition J. Uren and W. F. Price Understanding Hydraulics L. Hamill Understanding Structures Derek Seward Reinforced Concrete Design TO EuroCode 2 (EC2) W. H. Mosley Nanyang Technological University, Singapore R. Hulse Coventry University and J. H. Bungey University of Liverpool W. H. Mosley, R. Hulse and J. H. Bungey 1996 All rights reserved. No reproduction, copy or transmission of this publication may be made without written permission. No paragraph of this publication may be reproduced, copied or transmitted save with written permission or in accordance with the provisions of the Copyright, Designs and Patents Act 1988, or under the terms of any licence permitting limited copying issued by the Copyright Licensing Agency, 90 Tottenham Court Road, London W1P 9HE.

2 Any person who does any unauthorised act in relation to this publication may be liable to criminal prosecution and civil claims for damages. First published 1996 by MACMILLAN PRESS LTD Houndmills, Basingstoke, Hampshire RG21 6XS and London Companies and representatives throughout the world ISBN 978-0-333-60878-4 DOl ISBN 978-1-349-13413-7 ( eBook) A catalogue record for this book is available from the British Library Contents Preface Notation 1 2 3 4 Properties of Reinforced Concrete Composite Action Stress-Strain Relations Shrinkage and Thermal Movement Creep Durability Specification of Materials Limit State Design Limit States Characteristic Material Strengths and Characteristic Loads Partial Factors of Safety Global Factor of Safety Analysis of the Structure Loads Load Combinations and Patterns Analysis of Beams and Frames Redistribution of Moments Analysis of the Section Stress-Strain Relations Distribution of Strains and Stresses across a Section Bending and the Equivalent Rectangular Stress Block Singly Reinforced Rectangular Section in Bending Rectangular Section with Compression Reinforcement at the Ultimate Limit State v viii xi 1 1 3 8 13 14 15 18 19 20 21 24 29 30 31 33 56 62 63 65 67 68 73 vi CONTENTS Flanged Section in Bending at the Ultimate Limit State 80 moment

3 Redistribution and the Design Equations 87 Bending Plus Axial Load at the Ultimate Limit State 92 Rectangular-Parabolic Stress Block 103 Triangular Stress Block 106 5 Shear, Bond and Torsion 113 Shear 113 Anchorage Bond 125 Laps in Reinforcement 129 Analysis of Section Subject to Torsional Moments 131 6 Serviceability, Durability and Stability Requirements 139 Detailing Requirements 140 Span-Effective Depth Ratios 148 Calculation of Deflection 150 Flexural Cracking 164 Thermal and Shrinkage Cracking 171 Other Serviceability Requirements 174 Limitation of Damage caused by Accidental Loads 178 7 Design of Reinforced Concrete Beams 185 Preliminary Analysis and Member Sizing 187 Design for Bending 190 Design for Shear 207 Bar Spacing 214 Continuous Beams 214 Cantilever Beams 221 Design for Torsion 222 8 Design of Reinforced Concrete Slabs 227 Shear in Slabs 228 Span-Effective Depth Ratios 233 Reinforcement Details 233 Solid Slabs Spanning in One Direction 234 Solid Slabs Spanning in Two Directions 242 Flat Slab Floors 248 Ribbed and Hollow Block Floors 257 Stair Slabs 261 Yield Line and Strip Methods 266 CONTENTS vii 9 Column Design 276 Loading and Moments 276 Column Classification and Failure Modes 279 Reinforcement Details 283 Short Columns

4 Resisting Moments and Axial Forces 285 Non-Rectangular Sections 297 Biaxial Bending of Short Columns 301 9. 7 Design of Slender Columns 304 Walls 309 10 Foundations and Retaining Walls 311 Pad Footings 314 Combined Footings 322 Strap Footings 327 Strip Footings 329 Raft Foundations 332 Piled Foundations 333 Retaining Walls 338 11 Prestressed Concrete 350 Principles of Prestressing 352 Methods of Prestressing 354 Analysis of Concrete Section under Working Loads 357 Design for the Serviceability Limit State 363 Analysis and Design at the Ultimate Limit State 393 Appendix 407 Further Reading 421 Index 423 Preface The purpose of this book is to provide a straightforward introduction to the principles and methods of Design for Concrete structures. It is directed primarily at students and young engineers who require an understanding of the basic theory and a concise guide to Design procedures. Although the detailed Design methods are generally according to European Standards (EuroCodes), much of the theory and practice is of a fund-amental nature and should, therefore, also be useful to engineers in countries outside Europe.

5 The search for harmonisation of Technical Standards across the European Community (EC) has led to the development of a series of these Structural EuroCodes which are the technical documents intended for adoption throughout all the member states. The use of these common standards is intended to lower trade barriers and enable companies to compete on a more equitable basis throughout the EC. EuroCode 2 (EC2) deals with the Design of Concrete structures, which has most recently been covered in the UK by British Standard BS8110 which superseded British Standard CPllO in 1985. Limit state principles established by these British Standards are also adopted by EuroCode 2. The code drafting committee has also produced a range of supporting documents giving commentary and background explanation for some of the requirements of the code. Further supporting documentation includes, for each separate country, the National Application Document (NAD) which includes information specific to the individual member states.

6 Additionally the British Cement Association has produced The Concise EuroCode for the Design of Concrete Buildings which contains material that has been distilled from EC2 but is presented in a way that makes it more user-friendly than the main EuroCode and contains only that information which is essential for the Design of more everyday Concrete structures. It also contains information not included in EC2 such as Design charts and Design methods drawn from previous British Standards viii PREFACE ix such as BS8110 and CPllO. In this text, reference is made to both EC2 and the Concise Code. The presentation of EC2 is quite different from that of BS8110. However the essential feature of EC2 is that the principles of Design embodied in the document are almost identical to the principles inherent in the use of BS8110. Hence, although there are some differences in detail, engineers who are used to designing to the existing British Standard should have no difficulty in grasping the essential features of this new code.

7 Changes in terminology, arising partly from language differences, have resulted in the introduction of a few terms which are unfamiliar to engineers who have worked with BS8110. The most obvious of these is the use of actions to describe the loading on structures and the use of the terms permanent and variable actions to describe dead and imposed loads. Notwithstanding this, UK influence in drafting the document has been very strong and terminology is broadly the same as in existing British Standards. Throughout this text, terminology has been kept as consistently as possible in line with common accepted UK practice and hence, for example, loads has been used instead of actions in subsequent chapters. Other 'new' terminology will be identified at appropriate points in the text. The subject matter in this book has been arranged so that chapters 1 to 5 deal mostly with theory and analysis while the subsequent chapters cover the Design and detailing of various types of member and structure.

8 In order to include topics that are usually in an undergraduate course, there is a section on earth-retaining structures and also a final chapter on prestressed Concrete . Important equations that have been derived within the text are high-lighted by an asterisk adjacent to the equation number and in the Ap-pendix a summary of key equations is given. Where it has been necessary to include material which is not directly provided by the EuroCodes, this has been based on currently accepted UK good practice. In preparing this book, the principal aim has been to retain the struc-ture and features of the well established book Reinforced Concrete Design by Mosley and Bungey (Macmillan Press, 1990) which is based on British Standards and is currently in its 4th edition. By comparing both books it is possible to compare the essential differences between EuroCode 2 and existing British Standards and to contrast the different outcomes when structures are designed to either codes. It should be emphasised that Codes of Practice are always liable to be revised and readers should ensure that they are using the latest edition of any relevant standard.

9 Extracts from European Standards are reproduced by permission of the British Standards Institution, Linford Wood, Milton Keynes, Bucks., X PREFACE from whom complete copies can be obtained. Extracts from the Concise EuroCode for the Design of Concrete Structures are reproduced by per-mission of the British Cement Association, Century House, Telford Avenue, Crowthorne, Berks., from whom copies of the Concise EuroCode can be obtained. Finally, the authors would like to thank Mr J. Birch for his assistance with the preparation of parts of the text and Mrs Jamillah Sa'adon for typing part of the manuscript. Notation Notation is generally in accordance with EC2 and the principal symbols are listed below. Other symbols are defined in the text where necessary. The symbols e for strain and f for stress have been adopted throughout, with the general system of subscripts such that the first subscript refers to the material, c- Concrete , s-steel, and the second subscript refers to the type of stress, c-compression, t-tension.

10 E modulus of elasticity F load (action) G permanent load I second moment of area K prestress loss factor M moment or bending moment N axialload Q variable load T torsional moment V shear force a deflection b breadth or width d effective depth of tension reinforcement d' depth to compression reinforcement e eccentricity h overall depth of section in plane of bending radius of gyration k coefficient l length or span n ultimate load per unit area 1/r curvature of a beam s spacing of shear reinforcement or depth of stress block xi xii u X z Ecm Es Gk fc Mba! Msd Mu Nbal Nsd Po Qk Tsd Vsd wk bw fck fern fctm [pk /yk gk ki NOTATION thickness punching shear perimeter neutral axis depth lever arm Concrete cross-sectional area cross-sectional area of prestressing tendons cross-sectional area of tension reinforcement cross-sectional area of compression reinforcement cross-sectional area of tension reinforcement required at the ultimate limit state cross-sectional area of tension reinforcement provided at the ultimate limit state cross-sectional area of shear reinforcement in the form of links or bent-up bars secant modulus of elasticity of Concrete modulus of elasticity of reinforcing or prestressing steel characteristic permanent load second moment of area of Concrete moment on a column corresponding to the balanced condition Design value of moment ultimate moment of resistance axial load on a column corresponding to the balanced condition Design value of axial force initial prestress force characteristic variable load Design value of]


Related search queries