REINFORCING STEEL BARS PRICE LIST 04 November 2002

300 - 322 Quirino Highway, Baesa, Quezon City 1106 Tel No. 359-8888 to 96 / 456-7893 to 94 l Fax No. 359-8800/ 359-8897 Email: Website: REINFORCING STEEL BARS PRICE LIST04 November 2002 SIZE WEIGHTPRICE mm KGSTRUCTURALPNS GRADE 230(ASTM GRADE 33) Yield ,358 Tensile ,564 LENGTHISO 9001:2008 INTERMEDIATEPNS GRADE 275(ASTM GRADE 40) Yield ,885 Tensile ,618 psiHIGH TENSILEPNS GRADE (ASTM GRADE 60) Yield ,190 Tensile ,923 Additional P500/mt for Grade 415 W Vanadium and Niobium STEEL Bars. Prices quoted are VAT inclusive based on theoretical weight in accordance with Prices quoted are VAT inclusive based on theoretical weight in accordance withPhilippine National Standard (PNS 49) with maximum weight tolerance of +/- 6%. Special lengths of 1m - 5m for small sizes also available upon request.

REINFORCING STEEL BARS PRICE LIST 04 November 2002 SIZE WEIGHT PRICE mm KG/M 6.0 7.5 9.0 10.5 12.0 PER KG STRUCTURAL PNS GRADE 230 (ASTM GRADE 33) 8 0.394 47.28 59.10 70.92 82.74 94.56 20.00 Minimum Yield Point 10 0.616 73.92 92.40 110.88 129.36 147.84 20.00 230 Mpa 12 0.888 106.56 133.20 159.84 186.48 213.12 20.00

Tags:

  Steel, Reinforcing, Reinforcing steel

Information

Related documents

THE BAR GUIDE TO STEEL REINFORCEMENT STANDARDS …

www.uk-bar.org

welded joints between reinforcing steel bars and other steel components, such as connection devices and insert anchors, including prefabricated assemblies. BS EN 17660-2: 2006 Welding. Welding of reinforcing steel. Non load-bearing welded joints. Applies to the welding of weldable reinforcing steel and stainless reinforcing steel of non load ...

  Steel, Reinforcing, Reinforcing steel

Chapter 07 REINFORCING STEEL (REBAR)

www.roads.maryland.gov

Reinforcing Steel Design, fy = 60 ksi, the General Notes indicate These bar laps only apply where psi lightweight concrete. These bar laps only apply to 4500 shall be used. the Plans, the above dimensions When bar lap is not specified on Note: 5. 4. 03/21/2017 1.0 REBAR-BL-102 R E B A R-B A R L A P 1 1 LIGHTWEIGHT CONCRETE REINFORCING STEEL IN ...

  Steel, Reinforcing, Reinforcing steel

Properties of Reinforcing Steels - UK CARES

www.ukcares.com

reinforcing steel will be a function of both the mechanical characteristics of the steel, and the bar profile. Micro-alloy steels generally require higher bending loads, due to their increased work hardening rate. Consistency of bar shape is required for consistent bending performance.

  Steel, Reinforcing, Reinforcing steel

Product Chart - Reinforcing Steel & Mesh Suppliers NZ

www.fletcherreinforcing.co.nz

Product Chart for Reinforcing Steel Don’t take a risk - specify and insist on using Pacific Steel product in your next project Market Grade Grade Description Bar Diameters Available (mm) Length Range Specify R (R300E) G300E Plain Bar 10 12, 16, 20, 25 6m - 12m 6m - 18m SEISMIC® 300E plain bar/coil G300E Plain Coil 6, 8, 10, 12, 16 D (D300E)

  Chart, Product, Steel, Reinforcing, Reinforcing steel, Product chart

SLAB ON GRADE REINFORCING DESIGN - PDHonline.com

pdhonline.com

Placing the steel any lower than this limit could, however, adversely affect the performance of the slab. For most conventional slab-on-grade design, the steel does not have to be discontinuous at the contraction or sawn control joints. However, in cold storage facilities it is recommended that the reinforcing be discontinuous at all control ...

  Grade, Steel, Slab, Reinforcing, Slab on grade reinforcing, Slab on grade

Reinforcing Steel Placement Handbook

iowadot.gov

reinforcing steel can reduce the strength of the structure by preventing the necessary interaction between the concrete and the reinforcing steel. Proper bonding between the reinforcing steel and the concrete can also be prevented by debris on the bar such as dirt, mud, oil, or corrosion when the concrete is poured around it. ...

  Steel, Reinforcing, Reinforcing steel

Reinforcing Steel - Chapter 7

dot.sd.gov

Reinforcing Steel Inspections Inspectors job is to insure correct bars are properly placed & secured Count bars; compare to plans Check bar sizes. Substitution of bar sizes is not an option without authorization from Office of Bridge Design Check for proper tie pattern

  Steel, Reinforcing, Reinforcing steel

steelwise - AISC Home | American Institute of Steel ...

www.aisc.org

Tip 7: Don’t delegate design of reinforcing around beam web openings. Ei-ther eliminate the need for it or specify it on the design draw-ings. See AISC Design Guide 2: Steel and Com-posite Beams with Web Openings for more guidance (Figure 2). Tip 8: Don’t del-egate design of plate girder welds (Figure 3). Tip 9: Think about how the connections

  Steel, Cisa, Reinforcing

Related search queries