REPAIR PARTS 4-Valve Manifold - JB Industries

1 1845769322TM 2006 JB Industries AND TESTING4-ValveManifoldLIMITED WARRANTYINSTRUCTIONSPARTS LISTWith Free Floating,Double O-Ring,Piston Seal,Each gauge is individually tested and calibrated prior to shipment. Due to its sensitivity, the gauge may need to be "zeroed in" prior to usage. Adjusting Gauge Recal to Zero1. Remove lens Turn recal screw slightly in the opposite direc-tion that pointer is to be moved. Maximum recal screw adjustment is 1/2 turn. Over adjustment will permanently destroy Replace lens recal screw clockwise.

2 Pointer turns recal screw coun-terclockwise. Pointer turns are sensitive adjustment and/or being subjected to pressures over dial range are not covered under warranty PARTSSee your wholesaler for a complete line of gauges8MR-509O-Ring (2) 9M2-102 NHanging part " Intake2U1-4A1/4" Intake3MR-520 Sight Glass4MR-605 Piston w/Seat & O-Rings5MR-607 Stem & Nut6MR-601 Handwheel & Screw7MR-503 Handwheel Screws (2) part VACUUM PUMPSF eaturingHeavy Duty,High Performance1/2 HP, 60 Cyc MotorDV-42N CFM DV-85N3 CFMDV-142N5 CFMDV-200N7 CFMDV-285N10 CFMAlso Available With Dual Voltage MotorsDirections For UseCaution.

3 Always consult equipment manufacturer's service manual or instruc-tion sheet for recommended SideHigh SidePortPortService ValveService ValveBlueRedBlackYellowRedBlueTo ObserveClosedClosedClosedClosedBack SeatedBack SeatedOperating Pressures& Cracked Open& CrackedTo Charge RefrigerantOpenClosedClosedOpenBack SeatedFront SeatedThrough Suction Valve& Cracked OpenTo Charge OilOpenClosedOpenClosedBack SeatedFront SeatedThrough Suction ValveTo Charge Liquid RefrigerantClosedOpenClosedOpenMidway OpenThrough Discharge ValveTo Build Low Pressure; OpenOpenClosedClosedBack SeatedMidway OpenFor Control Setting& Cracked OpenOr Leak DetectingTo Purge RefrigerantClosedOpenClosedOpenBack SeatedFrom Discharge Valve& Craked OpenTo Evacuate WithOpenOpenOpenClosedMidway OpenMidway OpenVacuum PumpEVAPORATORCONDENSERRECEIVERCOMPRESSO RFOR PROFESSIONAL USE ONLYJB manifolds are designed for use by technically trained AC/R service engineers only.

4 Due to the high pressures encountered in all systems that this Manifold will be used on, plus the dangers due to the physical and chemical nature of refrigerants and oils present in all systems, misapplication could result in injury or WARRANTYM anifold bar has a lifetime warranty, while the components, gauges, hoses, handles, hose holders, etc. are covered under the limited warranty policy. Products are warranted for a period of one year from date of shipment by JB and limited to REPAIR , replacement or credit, if in our opinion are defective due to workmanship and/or materials.

5 Defective components should be returned to the wholesaler from which the product was purchased for are designed for use with all refrigerants except ammonia (R-717). Working pressures are limited to gauge dial range. Use of this Manifold under any other conditions voids the NO. 25000-308 PRINTED IN