Transcription of Reprocessing Guide - Stryker
1 Reprocessing GuideAutoclavable Arthroscope and Hardware Sterilization Use of Sterilization tray :233-032-116 Autoclavable Arthroscope and Hardware Sterilization ,.. :. ,.C-mount,. ,. ( ,. ,.materials,. ). Use of Sterilization ,.. (s).. ,.. (gloves,. ,.etc.).. ,.. ,. ,. ,. ,.. ,. ,.. ,.. ,. on Reprocessing .. tray ,. of Use .. ,. and (s)./. for Manual :.base,.lid,.and.( ).. Cleaning1 Brush . ,.. ,.. ,. Rinse . (RO/DI). ,.. ( ).. ,. ,. Soak .. Brush .. ,.. ,..at.. Rinse . ,.. ( ).. ,. Cleaning1 Rinse . :. ,.lid,.and.( ).. ,.. Automated wash . TimeWater TemperatureDetergent (type and concentration)Pre Enzyme C(140 F) C(140 F) Dry Temperature115 C.(239 F) ..at.. Drying .. ( ).. ,.. and Testing . ,.. ,. for Sterilization.
2 Warning: Place the stopcock of the devices (where applicable) in the open position prior to sterilization else non sterile product may : Only devices marked autoclavable are compatible with steam sterilization methods. Using steam sterilization on devices that do not bear this marking can cause permanent product damage.. (s).. (s). (Steam)Prevacuum Flash PrevacuumWrappingdouble Temperature132 C(270 F)132 C(270 F) : Drying time depends on several variables, including: altitude, humidity, type of wrap, preconditioning, size of chamber, mass of load, material of load, and placement in chamber. Users must verify that drying time set in their autoclave yields dry surgical equipment. Warning: These instructions were developed using the guidance from AAMI TIR 12, ISO 17665 and AAMI ST79 and Stryker recommends users observe these ( ).
3 ,. InformationN/AManufacturer ,. + ,.+ tray SetupMaximum Weight Load ( ) kg ( lbs)Internal Indicator* (.). Indicator* (). *Note:. ,. ,. ,. ISO 17664 ISO 17665-1 :. ,. ANSI/AAMI ST77 ANSI/AAMI ST79 ANSI/AAMI ST81 AAMI TIR12 Designing,.testing,. :. for ,. + +.
