Example: dental hygienist

REVISION AO FFSD-XX-X-XX.XX-01-X-X-XXX

NOTES: REVISION AO 1. HIDDEN LINES ARE USED TO SHOW POLARIZATION WHEN USING -N OPTION. 2. C REPRESENTS A CRITICAL DIMENSION. 3. ffsd CABLE ASSEMBLIES ARE LEAD FREE. OPTION. DO NOT 4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED. SCALE FROM FOR SHORTS AND OPENS. -RW: REVERSE WIRING. THIS PRINT 5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 630V. C (NOT AVAILABLE WITH -RN1 OR -RN2). No OF POSITIONS -D"XX": DAISY CHAIN (MINIMUM [ ], 6. STRAIN RELIEF TO WITHSTAND 5LB[22N] STRAIGHT PULL. -02 THRU -25 [ ] INCREMENTS). 7. NOTE DELETED. (PER ROW) -R: REVERSED. 8. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS SHOULD NOT EXTEND. PAST THE CABLE INSULATION, EXTENDING LESS THAN 25% OF CABLE END ASSEMBLY (NOT AVAILABLE WITH -M OR -O). THICKNESS ON CONSECUTIVE AND LESS THAN 50% OF CABLE THICKNESS -S: SINGLE END (MINIMUM [ ], [ ] INCREMENTS). ON NON-CONSECUTIVE STRANDS IS CONSIDERED A PROCESS INDICATOR.

this document contains confidential and proprietary information and all design, manufacturing, reproduction, use, patent rights and sales rights are expressly reserved by …

Tags:

  Revisions, Ffsd xx x xx, Ffsd, Xx 01

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of REVISION AO FFSD-XX-X-XX.XX-01-X-X-XXX

1 NOTES: REVISION AO 1. HIDDEN LINES ARE USED TO SHOW POLARIZATION WHEN USING -N OPTION. 2. C REPRESENTS A CRITICAL DIMENSION. 3. ffsd CABLE ASSEMBLIES ARE LEAD FREE. OPTION. DO NOT 4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED. SCALE FROM FOR SHORTS AND OPENS. -RW: REVERSE WIRING. THIS PRINT 5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 630V. C (NOT AVAILABLE WITH -RN1 OR -RN2). No OF POSITIONS -D"XX": DAISY CHAIN (MINIMUM [ ], 6. STRAIN RELIEF TO WITHSTAND 5LB[22N] STRAIGHT PULL. -02 THRU -25 [ ] INCREMENTS). 7. NOTE DELETED. (PER ROW) -R: REVERSED. 8. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS SHOULD NOT EXTEND. PAST THE CABLE INSULATION, EXTENDING LESS THAN 25% OF CABLE END ASSEMBLY (NOT AVAILABLE WITH -M OR -O). THICKNESS ON CONSECUTIVE AND LESS THAN 50% OF CABLE THICKNESS -S: SINGLE END (MINIMUM [ ], [ ] INCREMENTS). ON NON-CONSECUTIVE STRANDS IS CONSIDERED A PROCESS INDICATOR.

2 -D: DOUBLE END -RN1: REVERSE POLARIZATION NOTCH. 9. REFERENCE ffsd -XX-XX-X-N-XXX FOR CONNECTOR ASSEMBLY (NOT AVAILABLE WITH -RW OR -RN2). DIMENSIONS AND ITS REQUIREMENTS. ASSEMBLY LENGTH -RN2: REVERSE POLARIZATION NOTCH. 10. COLORED WIRE MUST MATCH FIRST POSITION INDICATOR (NOT AVAILABLE WITH -RW OR -RN1). -D"XX", -R, -M & -O OPTION: [ ] MINIMUM. ON THE FIRST CONNECTOR FOR ALL OPTIONS WITH THE -M: MIDDLE REVERSE. ALL OTHER OPTION: [ ] MINIMUM. EXCEPTION OF -RW. (NOT AVAILABLE WITH -R OR -O). 11. FOR LENGTHS LESS THAN ", TOLERANCE SHALL BE + , (MINIMUM [ ], [ ] INCREMENTS). ALL OTHER LENGTHS SHALL BE +/-1%. LEAD STYLE -O: OUTSIDE REVERSE. (NOT AVAILABLE WITH -R OR -M). PLATING OPTIONS (MINIMUM [ ], [ ] INCREMENTS). C -SR: STRAIN RELIEF. - LEAVE BLANK FOR STANDARD, USE C-67-L (NOT AVAILABLE WITH -O, -M, [ x ] 1%. -S: USE C-67-S -R, OR -DXX). (SEE NOTE 8 & 11) -F: USE C-67-F (SOLD AS ASSEMBLIES ONLY).

3 STANDARD POLARIZATION NOTCH. -N: POLARIZATION NOTCH. (NOT AVAILABLE IN -02 THRU -04). (LEAVE BLANK FOR -02, -03, -04)..075 REF. [ x ] 1%. (SEE NOTE 8 & 11). C .120 C. REF (No OF POS x .050[ ]). + .165[ ] REF..010 MAX. RED WIRE TO SIDE..006 MAX CABLE OVERHANG. 2 OF FIRST POS INDICATOR. (SEE NOTE 8). +.006 + -N OPTION. C .200 - .003 - .040 -RN1 OPTION -N OPTION REF FIG 2. 1 NOTCH DENOTES ( SHOWN). -RN2 OPTION FIRST POSITION (SAME AS FIG 1, DIFFERENT AS SHOWN). FIG 1. ( SHOWN). * PROPRIETARY NOTE *. UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND. RED WIRE TO OPPOSITE DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, SIDE OF FIRST POS. INDICATOR TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS. AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE.

4 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR..XX: .01 [.3] 2 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150..XXX: .005 [.13] OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047..XXXX: .0020 [.051] WRITTEN CONSENT OF SAMTEC, INC. e-Mail code 55322. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: INSULATORS: PBT UL94V-0, COLOR: BLACK .050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY. CONTACT: BeCu DWG. NO. WIRE: 30 AWG, 7/38, TINNED, STRANDED WITH. FIG 11 GRAY PVC INSULATOR. PLATING: .000010 GOLD OVER .000050 NICKEL. ( SHOWN) REMAINDER: .000200 REF TIN OVER .000050 NICKEL. F:\DWG\MISC\MKTG\ BY: T NEWTON 02/15/2008 SHEET 1 OF 4. REVISION AO. FIG 3. ( SHOWN). (SAME AS FIG 1, DIFFERENT AS SHOWN). FIRST POSITION INDICATOR. FIRST CONNECTOR. FIRST POSITION INDICATOR. FIRST POSITION INDICATOR.

5 [ x ] .13[ ] [ x ] .13[ ]. (MIN 2") (MIN 2"). OUTSIDE CONNECTOR REVERSED WHEN DAISY CHAINED MIDDLE CONNECTOR REVERSED WHEN DAISY CHAINED. FIG 4 FIG 5. ( SHOWN) ( SHOWN). FIRST POSITION INDICATOR (SAME AS FIG 1, DIFFERENT AS SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN). ( [ ] MINIMUM, [ ] INCREMENTS) ( [ ] MINIMUM, [ ] INCREMENTS). SECOND CONNECTOR. ( SHOWN). (SAME AS FIG 1, DIFFERENT AS SHOWN). FIRST CONNECTOR. FIRST POSITION INDICATOR. FIRST POSITION INDICATOR. FIRST POSITION INDICATOR [ x ] .13[ ]. (MIN 2"). [ x ] .13[ ]. (MIN 2"). FIRST POSITION INDICATOR. FIG 7. ( SHOWN). (SAME AS FIG 1, DIFFERENT AS SHOWN). ( [ ] MINIMUM, [ ] INCREMENTS). SECOND CONECTOR. * PROPRIETARY NOTE *. BOTH CONNECTORS REVERSED WHEN DAISY CHAINED THIS DOCUMENT CONTAINS CONFIDENTIAL AND. NOTE: PROPRIETARY INFORMATION AND ALL DESIGN, -RN1 = REVERSE NOTCH ON 1ST CONNECTOR ONLY MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS.

6 ( NOT AVAILABLE WITH -R OPTION) AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE. -RN2 = REVERSE NOTCH ON 2ND CONNECTOR ONLY. (NOT AVAILABLE WITH -R OPTION). FIG 6 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR. REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY. 520 PARK EAST BLVD, NEW ALBANY, IN 47150. PHONE: 812-944-6733 FAX: 812-948-5047. ( SHOWN) OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail code 55322. (REVERSE NOTCH NOT AVAILABLE WITH -RW OR ANY (SAME AS FIG 1, DIFFERENT AS SHOWN) WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DAISY CHAIN OPTIONS) (NOT AVAILABLE WITH -RN1 OR -RN2 OPTION) DO NOT SCALE DRAWING .050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY. ( [ ] MINIMUM, [ ] INCREMENTS). DWG. NO. SHEET SCALE: 2:1. F:\DWG\MISC\MKTG\ BY: T NEWTON 02/15/2008 SHEET 2 OF 4. REVISION AO. IN-PROCESS 1.

7 (2-15 POS -SR ONLY FOR DOUBLE END). (No OF POS x .050[ ]) C. + .315[ ] REF. [ x ] + .4375[ ] .125[ ]. 4..039 IN-PROCESS 2. (2-15 POS -SR ONLY FOR DOUBLE END)..335 .010 3. C. ( [ x ] .13[ ]. FIG 9 ( [ x ] .13[ ]). STRAIN RELIEF OPTION (POS 2-15 ONLY) C. ( SHOWN). (SAME AS FIG 1, DIFFERENT AS SHOWN). IN-PROCESS 1. (16-25 POS -SR ONLY FOR DOUBLE END). [ x ] +.4375[ ] .125[ ]. IN-PROCESS 2. (16-25 POS -SR ONLY FOR DOUBLE END). [ x ] .13[ ]. C. DETAIL 'A'. SCALE 8 : 1..0228+ + .000 IN-PROCESS 3. (16-25 POS -SR ONLY FOR DOUBLE END). 6. * PROPRIETARY NOTE *. THIS DOCUMENT CONTAINS CONFIDENTIAL AND. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS. 'A' AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE. OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150.)

8 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047. OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS. e-Mail code 55322. 5 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: FIG 10 DO NOT SCALE DRAWING .050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY. STRAIN RELIEF OPTION (POS 16-25 ONLY). DWG. NO. ( SHOWN). SHEET SCALE: 2:1. (SAME AS FIG 9, DIFFERENT AS SHOWN). SCALE 1 : 1. F:\DWG\MISC\MKTG\ BY: T NEWTON 02/15/2008 SHEET 3 OF 4. REVISION AO. IN-PROCESS 1 IN-PROCESS 1. ( ONLY) (16-25 POS -SR ONLY FOR SINGLE END). ( [ x ] .125[ ]). [ x ] +.4375[ ] .125[ ]. IN-PROCESS 2. (16-25 POS -SR ONLY FOR SINGLE END). IN-PROCESS 1. (2-15 POS -SR ONLY FOR SINGLE END). [ x ] .125[ ]. C. [ x ] + .4375[ ] .125[ ]. IN-PROCESS 3. (16-25 POS -SR ONLY FOR SINGLE END). IN-PROCESS 2. (2-15 POS -SR ONLY FOR SINGLE END). * PROPRIETARY NOTE *. THIS DOCUMENT CONTAINS CONFIDENTIAL AND.

9 PROPRIETARY INFORMATION AND ALL DESIGN, ( [ x ] .125[ ]) MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS. AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, C INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE. OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150. REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY. PHONE: 812-944-6733 FAX: 812-948-5047. OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS. WRITTEN CONSENT OF SAMTEC, INC. e-Mail code 55322. DESCRIPTION: DO NOT SCALE DRAWING..050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY. DWG. NO. SHEET SCALE: :1. F:\DWG\MISC\MKTG\ BY: T NEWTON 02/15/2008 SHEET 4 OF 4.


Related search queries