Right Angle Drive - ENM Co

1 SPECIFICATIONST ypes:Single Right Angle , dual T- Angle and dual 90 angleInput Shafts:5/32", 3/16" tang and .104",.183" sq. femaleOutput Shafts:5/32", 3/16" tang ", .151" sq. femaleInput and Output Fittings:7/8 18 NSSleeve "Rotation:Clockwise or counterclockwise, same or reverseRatios:Input to output, 1:1 and 2:1 standardMaterials:Housing Aluminum alloyFittings Plated steelGears and Shafts One-piece steel, hardened and groundBearings Oil impregnated bronze, no lubrication requiredWeights:Single drives 10 drives 12 ATYPE EDual90 AnglesTYPE JTYPE BTYPE FTYPE KTYPE CTYPE LTYPE DTYPE MDimensionaldata is for request. Prevent flexible shaft kinking Maintain or decrease speeds Same or reverse rotation Available with single or dual Company5617 Northwest HighwayChicago, Illinois 60646-6135(773) 775-8400 Fax (773) 775-5968 Toll Free (888) 372-0465e-mail.

2 Angle DriveAdapters CatalogSeries AD1 HSAE Right Angle Drive AdaptersThis easy to use catalog will help youselect the correct Right Angle driveadapter for your OEM or offering ten standard Series AD1 Htypes, ENM can satisfy most popularengine needs with a reliable, rugged,heavy duty Right Angle Drive they are specifically built forsevere service conditions, ENMadapters are ideally suited for dieselpowered earth moving equipment,trucks and adapters are engineered for long,precise, trouble-free life. Shafts and gears are one-piece construction of hardenedand ground steel. All fittings are plated steel with oil impregnated sintered bronzebearings factory lubricated for life. And ENM has strengthened the weak link in mostadapters by lengthening the input sleeve to make a more rugged housing.

3 Thisalso provides an easier, more secure manufactures and stocks ample quantities of case housing and components forprompt shipment of any of our ten standard Right Angle Drive adapters. Many of theseExtended sleeve forgreater strength andeasier, more secure mountingAll shafts andfittings per SAEstandardsOne-piece shaft andgear construction forlong-life precisionHeavy duty,lightweightaluminum alloyhousingConfigurations and Input/Output Rotations (Series AD1H Only)ENM Company, 5617 Northwest Highway, Chicago, IL 60646-6135 Phone: (773) 775-8400 or toll free (888) 372-0465 Fax: (773) 775-5968 email: Company, 5617 Northwest Highway, Chicago, IL 60646-6135 Phone: (773) 775-8400 or toll free (888) 372-0465 Fax: (773) 775-5968 email.

4 As Series AD1H, except available in singleright Angle types only with sleeve length ofSPECIFICATIONSSame as Series AD1H, except available in single Right angletypes only with sleeve length of and fittings are 5/8 Same or reverse rotation Available with single take-offs One-piece shaft and gear construction Light duty, lightweight aluminum alloy housing All shafts and fittings per SAE standardsSeries AD3H is similar in design and construction to Series AD1H. It offers four different types of Right Angle Drive adapters that willfill most medium service AD2 HSAE Right Angle Drive Adapters Same or reverse rotation Available with single take-offs One-piece shaft and gear construction Light duty, lightweight aluminum alloy housing All shafts and fittings per SAE standardsSeries AD2H offers four standard types of Right Angle Drive adapters to satisfythe most prevalent medium service in design and construction to Series AD1H with but one exception,Series AD2H features a shorter sleeve of conventional length.

5 This enables it,dimensionally, to be used as a direct replacement for most standard rightangle Drive data is for reference only. Certified dimensions available on data is for reference only. Certified dimensions available on ATYPE CTYPE DTYPE ATYPE BTYPE CTYPE DSeries AD3 HSAE Right Angle Drive Company, 5617 Northwest Highway, Chicago, IL 60646-6135 Phone: (773) 775-8400 or toll free (888) 372-0465 Fax: (773) 775-5968 email: & Fittings for Series AD1H, AD2H, and AD3 HRATIO 1:1 INPUT TO OUTPUT Note: The 1:1 ratio is standard. Consult factory of other ratios " TangAvailableFor All TypesINPUT23/16" TangAvailable For All "Sq. FemaleAvailable ForSingle RightAngle TypesA, B, C, D " For AllOUTPUT25/32" TangAvailable For All TypesOUTPUT33/16" TangAvailable ForAll "Sq.

6 FemaleAvailable ForSingle RightAngle TypesA, B, C, D " Sq. FemaleAvailable For Single RightAngle Type A, B, C, D OnlyINPUTSSERIES1H Long Sleeve 7/8 18 Fittings2H Short Sleeve 7/8 18 Fittings3H Short Sleeve 5/8 18 FittingsINPUT1 5/32 Tang (1H, 2H, 3H Only)2 3/16 Tang (1H, 2H, 3H Only)3 .104 Sq. Female4 .183 Sq. Female (1H, 2H, 3H Only)5 .104 Sq. FemaleOUTPUT1 .104 Sq. Female2 5/32 Tang (1H, 2H, 3H Only)3 3/16 Tang (1H, 2H, 3H Only)4 .151 Sq. Female (1H, 2H, 3H Only)TYPEAB1H, 2H, 3H OnlyCDEFJ1H, 3H OnlyKLMRATIO A = 1:1 TERMSNet 30 days, Chicago. Prices are subject to change. Orders received will be billed at prices in effect at time of Company warrants that the product will be free from defects in material and workmanship for a period of one year.

7 While within warranty, ENM Company willcorrect any defect by repair or replacement, Chicago. ENM Company shall not be liable for any consequential damage. If the product has been misapplied,improperly used, or exceeds the life or operating characteristics, the Warranty will not apply. Special extended warranties available to our customers upon priorwritten arrangement. All ENM products which fail within the warranty period due to defects in material or workmanship will be repaired or replaced, at ENM s option, without charge tothe consumer when returned with proof of purchase to any authorized ENM dealer in the United States, transportation charges prepaid, provided there is noevidence of improper installation, tampering, or other abuse.

8 All implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, shall be limited in duration to the express warranty periodspecified 1If for original equipment, select the fittings, ratio, configuration and rotations desired. If for aftermarket,compare the old adapter with ENM diagrams and photos for a correct 2 After selections, specify the Catalog No. Begin all Catalog Nos. with the Prefix AD1H, AD2H, AD3H, orAD4H, as required. This identifies the basic ENM 3 Next specify the Input Fitting (1, 2, 3, or 4) as selected from SHAFTS & FITTINGS on page 4 Now specify the Output Fitting (1, 2, 3, or 4) also selected from SHAFTS & FITTINGS on page 5 Then specify the Type (A, B, C, D, E, F, J, K, L, or M) as selected from TYPES on pages 1 or the configuration and rotations : Series AD2H available in Types A, B, C, or D 6 Specify A for the standard ratio of 1:1.

9 Other ratios are available. Consult : AD1 HExample: AD1H2 Example: AD1H23 Example: AD1H23 AExample: AD1H23 AASummar y Example: AD Right Angle AdaptersHow To OrderWhen ordering, furnish the quantity and complete Catalog No. for promptshipment of the correct adapter. AD1H23 AAEquals: AD1H23 AAIn this example, our customer has ordered aNo. AD1H23AA. This is a basic ENM SeriesAD1H adapter, with a 5/32" tang on the inputshaft, a 3/16" tang on the output shaft, in aright Angle configuration with clockwise inputand counterclockwise output rotations, and1:1 Company, 5617 Northwest Highway, Chicago, IL 60646-6135 Phone: (773) 775-8400 or toll free (888) 372-0465 Fax: (773) 775-5968 email: 1997 ENM Co.