Rivolta F.L.G. GT-2/GT-Spray - chlc.com.hk

1 GT-2/GT-SprayHigh performance and for high and low temperature food grade lubricating greaseRivolta GT-2 is NSF-H1 registered and is a fully synthetic high performance lubricant for the food, pharmaceutical and relevant is a penetration-stable, extremely water-resistant, high temperature-stable synthetic grease developed for heavily loaded roller and plain bearings as well as for guidings in a very wide operative temperature-range of -45 Cbis +170 C. Because of its low dynamic friction Rivolta GT-2 can be used for fast running roller bearings as well as at very low Roller bearings -Heavily loaded deep groove ball bearings, conical roller and needle roller bearings at extremely low and extremely high temperatures, bearings in frost tunnels, automatic baking ovens and drying kilns -Bearings in electromotors, ventilators, hot gas ventilators -Support roller holders and guide pulley bearings in conveyors, dryers and ovens Plain bearings exposed to high temperatures, low temperature grease for bearings and guidings, high performance grease for fast running roller and plain bearings of all kind For the lubrication of bolts, joints, disc cams and sliding points Product Strength NSF-H1 registered.

2 The strict demands to food hygienics will be kept. An oil leakage would not be followed by production stop Long term use of lubricant provides aging and oxidation resistance thus reduce maintenance costs and labour costs Provide good water resistant and excellent corrosion protection, suitable for use in humid environment High thermal stability and can be operated in a wide temperature range from -45 Cup +170 C Has good pumpability at very low temperatures environment because of the favorable flow pressure-temperature characteristic Create an elasto-hydrodynamic lubrication which greatly reduce wear and friction and thus extend the lifetime of the bearingsProcessingRemove contaminations and residues as far as GT- spray : spray directly to the application GT-2/ GT- spray NSF-H1 listedTechnical dataUnit of GT-2/ GT-SprayDensityg/mlDIN of base oil at 40 Cmm2/sDIN 5156246 NLGI-grade-DIN 518182 Worked penetration1/10 mmDIN/ISO 2137265-295 Operative temperature-range C--45/+170 Dropping point CDIN/ISO 2176>250 Corrosion stability against DIN 518020/0 Corrosion effect on 518111 Oil separation at 40 C/18hrVol.

3 %DIN 51817< at 90 C/3hr-DIN 51807 -Test*Friction coefficient min maxWear rate ball disc--mm mDIN < *Swing friction wear tester, T=190 C, F= GT-2 packing in125ml lubricator, 200g lubricator, 500g cartridge, 1kg tin, 10kg pail and 25kg GT- spray packing in 400 mL spray ca