ROOTS TM Blower and Compressor Synthetic Lubricating Oil

1 S-LUBOIL extensive life testing on rotary lobe blowers, DresserROOTS introduced a special blend, high-temperature,(polyalphaolefin based) Synthetic Lubricating oil forROOTS blowers in 1990. LUBRICANT ADVANTAGES: High Oxidation Stability- Contains oxidation-resistant additives that mean longer oil life and feweroil changes. ROOTS Synthetic Lubricating oil excelsin ASTM oxidation tests, and in the field, where itcounts. Longer oil life means lower expenditures, andgreater conservation. Rapid Separation from Water- Promotes prolongedbearing life. Excellent Corrosion Protection- Contains syntheticcorrosion inhibitors.

2 Protects during operation andacts as a preservative during shut down. Synthetic Solvency- Keeps equipment clean. Ashless- Keeps equipment free from metallic ashdeposits. Compatible with Seals- Has excellent compatibilitywith seals. Blower Protection- Protects Blower through a widerange of operating temperatures. Pour Point - from -40 F (-40 C). Flash Point- at500 F (260 C). Range of Use- ROOTS Synthetic Lubricating oilcan be used in any Blower application or operatingenvironment. High Film Strength- ROOTS Synthetic lubricatingoil carries up to 700% greater loads than othermineral and Synthetic oils.

3 Low Friction- Extremely low coefficient of frictionproven to save energy over conventional oils. Compatibility With Other Oils- ROOTS syntheticlubricating oil is compatible with, and can be mixedwith, other mineral oils and most other Synthetic oilsNo special cleaning is required at change out forblowers previously running on mineral oil. NOTE: It isNOT compatible with silicone or glycol synthetics. ISO Grade Availability- Available in ISO Grade 100,150, 220, or 320. Container Sizes- Available in one-quart containers,12-quart cases, one-gallon containers, 5-gallon pails,or 55 gallon 's ROOTS blowers and exhausters are designedand built with the same attention to detail that hasfirmly established the Dresser ROOTS reputation forreliability, quality and technical excellence over the past 150 years.

4 ROOTS Synthetic Lubricating oils are made with thesame quality and technical excellence standards tomeet the highest specifications required for andCompressor SyntheticLubricating Oil 2007 Dresser, Inc. all rights reserved. Printed in the All information subject to change without notice. ROOTS is a trademark of Dresser, Operations900 West Mount StreetConnersville, IN 47331Ph: 765-827-9200Fx: 765-827-9266 Huddersfield OperationsPO Box B7 Off St. Andrews RdTurnbridge, HuddersfieldEngland HD1 6 RBPh: +44 (0) 1484 42 22 22Fx: +44 (0) 1484 42 34 29 Headquarters16240 Port Northwest DriveHouston, TX 77041 Toll Free (US): 1-877-363-7668Ph: 832-590-2305 Toll Free (US) Fax: 1-877-357-7238Fx: 832-590-2326website: US email: UK email: LUBRICANTSROOTS Synthetic Oil: ISO-VG-320 GradePart NumberQuart13106004 Gallon13106005 Case (12 qts)13106007 ROOTS Synthetic Oil: ISO-VG-220 GradePart NumberQuart13106001 Gallon13106002 Case (12 qts)13106008 ROOTS Synthetic Oil.

5 ISO-VG-150 GradePart NumberQuart13106020 Gallon13106021 Case (12 qts)131060235 Gallon Pail1310602255 Gallon Drum13106025 ROOTS Synthetic Oil: ISO-VG-100 GradePart NumberQuart13106011 Gallon13106012 Case (12 qts)131060145 Gallon Pail1310601355 Gallon Drum13106016 ROOTS Synthetic Grease: NLGI #2 Part oz. TubeT200019-0015 Gallon PailT200019-003 Case (30 tubes)T200019-0022 -8 Blower Recommended Oil GradesAmbientTemperatureAbove 90 F (32 C)32 to 90 F (0 -32 C)0 to 32 F (-18 -0 C)Below 0 F (-18 C)10 -20 Splash Lubricated Blower Recommended Lubricating OilsISOV iscosity Range 320220150100 Ambient Temperature32 to 120 F (0 -49 C)Below 32 F (0 C)10 -20 Pressure Lubricated Blower Recommended Lubricating OilsISO Viscosity Range 220100 All RGS - Use ISO - VG - 100 AmbientTemperatureAbove 90 F (32 C)32 to 90 F (0 -32 C)0 to 32 F (-18 -0 C)Below 0 F (-18 C)

6 ISOV iscosity Range 320220150100 See the manual provided with the Blower for serviceintervals of the lubrications mentioned.