Rosemount 3051S Series Pressure Transmitter

1 Reference Manual00809-0200-4801, Rev FAFebruary 2021 Rosemount 3051S Series PressureTransmitterwith FOUNDATION Fieldbus ProtocolSafety messagesNOTICERead this manual before working with the product. For personal and system safety, and for optimum productperformance, make sure you thoroughly understand the contents before installing, using, or maintaining this listed technical assistance CentralTechnical support, quoting, and order-related States - 1-800-999-9307 (7:00 am to 7:00 pm CST)Asia Pacific- 65 777 211 Europe/ Middle East/Africa - 49 (8153) 9390 North American Response CenterEquipment service (24 hours includes Canada)Outside of these areas, contact your local Emerson representative.

2 CAUTIONThe products described in this document are NOT designed for nuclear-qualified non-nuclear qualified products in applications that require nuclear-qualified hardware or products may cause information on Rosemount nuclear-qualified products, contact your local Emerson Sales Representative. WARNINGE xplosions can result in death or serious not remove the Transmitter covers in explosive environments when the circuit is engage both Transmitter covers to meet explosion-proof connecting a communicator in an explosive atmosphere, make sure the instruments in the loop are installed in accordancewith intrinsically safe or non-incendive field wiring the operating atmosphere of the Transmitter is consistent with the appropriate hazardous locations shock could cause death or serious contact with the leads and leaks could result in death or serious and tighten all four flange bolts before applying not attempt to loosen or remove flange bolts while the Transmitter is in equipment or spare parts not approved by Emerson or use as spare parts could reduce the Pressure retainingcapabilities of the Transmitter and may render the instrument only bolts supplied or sold by Emerson as spare

3 Assembly of manifolds to traditional flange can damage SuperModule safe assembly of manifold to traditional flange, bolts must break back plane of flange web ( , bolt hole) but must not contactsensor module WARNINGS uperModule and electronics housing must have equivalent approval labeling in order to maintain hazardous upgrading, verify SuperModule and electronics housing certifications are equivalent. Differences in temperature classratings may exist, in which case the complete assembly takes the lowest of the individual component temperature classes (forexample, a T4/T5 rated electronics housing assembled to a T4 rated SuperModule is a T4 rated Transmitter .)Severe changes in the electrical loop may inhibit HART Communication or the ability to reach alarm values.

4 Therefore, Emersoncannot absolutely warrant or guarantee that the correct failure alarm level (HIGH or LOW) can be read by the host system at thetime of accessUnauthorized personnel may potentially cause significant damage to and/or misconfiguration of end users equipment. This couldbe intentional or unintentional and needs to be protected security is an important part of any security program and fundamental to protecting your system. Restrict physical accessby unauthorized personnel to protect end users assets. This is true for all systems used within the Using this Models Device driver Transmitter data Product Safety Device Device General block Resource Analog input (AI) function LCD display transducer Safety Installation Zeroing Rosemount 305, 306, and 304 4 Operation and Safety Master reset Safety Service Communication Analog input (AI) function 64 Reference ManualContents00809-0200-4801 February LCD Transducer Advanced Diagnostics Transducer Block (ADB).

5 Troubleshooting and diagnostic 6 Advanced Pressure Diagnostics for FOUNDATION Fieldbus .. Process Plugged Impulse Line Process Intelligence Process Intelligence Process Intelligence configuration and Plugged Impulse Line detection Configuration of Plugged Impulse Line AReference Product Ordering information, specification, and BFOUNDATION Fieldbus Block Resource Sensor Transducer Analog Input (AI) Function LCD Display Transducer Advanced Diagnostics Transducer Block (ADB)..122 ContentsReference ManualFebruary this manualThe sections in this manual provide information on configuring, troubleshooting,operating, and maintaining Rosemount 3051S Series Pressure Transmitters specifically forFOUNDATION Fieldbus sections in this manual are organized as follows: Configuration provides instruction on configuration of the tranmitter, information onsoftware functions, configuration parameters, and other variables are also included.

6 Installation contains mechanical and electrical installation instructions, and fieldupgrade options. Operation and maintenance contains techniques to maintain the Transmitter . Troubleshooting provides troubleshooting techniques for the most common operatingissues. Advanced Pressure Diagnostics for FOUNDATION Fieldbus contains procedures forinstallation, configuration, and operation of the FOUNDATION Fieldbus Diagnosticsoption. Reference data supplies links to updated specifications, ordering information, intrinsicsafety approval information, European ATEX directive information, and approvaldrawings. FOUNDATION Fieldbus Block Information supplies reference block information such asparameter Transmitter with HART , see Rosemount 3051S Reference ManualIntroduction00809-0200-4801 February coveredThe following transmitters and the Rosemount 300S Housing Kit are covered in Rosemount 3051S provides a wide range of applications, and many of these differentapplications have their own reference manuals.

7 This manual covers the Rosemount 3051 SFOUNDATION Fieldbus 1-1: Rosemount 3051S Coplanar Pressure TransmitterPerformance classMeasurement typeDifferentialGaugeAbsoluteUltraXXXU ltra for FlowXN/AN/AClassicXXXT able 1-2: Rosemount 3051S In-Line Pressure TransmitterPerformance classMeasurement typeDifferentialGaugeAbsoluteUltraN/AXXC lassicN/AXXT able 1-3: Rosemount 3051S Liquid Level Pressure TransmitterPerformance classMeasurement typeDifferentialGaugeAbsoluteClassicXXXT able 1-4: Rosemount 3051S Transmitter with FOUNDATION Fieldbus DiagnosticsTransmitterPerformance classMeasurement typeDifferentialGaugeAbsoluteUltraXXXU ltra for FlowXN/AN/AClassicXXXFor information on other Rosemount 3051S transmitters, refer to the following referencemanuals.

8 Rosemount 3051S HART Reference Manual Rosemount 3051S Wireless Reference Manual Rosemount 3051S Electronic Remote Sensor (ERS ) System Reference Manual Rosemount 3051S MultiVariable Reference ManualIntroductionReference ManualFebruary 300S Scalable Housing KitsKits are available for all models of Rosemount 3051S Pressure driver informationRelease dateDevice identificationDevice driver identificationReviewinstructionsReviewfu nctionalityNAMUR hardwarerevision(1)NAMUR softwarerevision(1)FOUNDATION FieldbussoftwarerevisionFOUNDATIONF ieldbusuniversalrevisionDevicerevision(2 )(3)Manual ,mass flowremovedDec-08N/ , ,blockinstantiation, commonsoftwaredownloadSep-01N/AN/A1/0 (1)NAMUR Revision is located on the hardware tag of the device.

9 Differences in level 3 changes, signified above by xx,represent minor product changes as defined per NE53. Compatibility and functionality are preserved and product canbe used interchangeably.(2) FOUNDATION Fieldbus device revision can be read using a FOUNDATION Fieldbus-capable configuration tool. Value shown isminimum revision that could correspond to NAMUR Revisions.(3) Device driver file names use device and DD revision. To access new functionality, the new device driver must bedownloaded. It is recommended to download new device driver files to ensure full data flowMeasured processinputPA/DMicroFF recycling/disposalRecycling of equipment and packaging should be taken into consideration and disposed ofin accordance with local and national ManualIntroduction00809-0200-4801 February ManualFebruary section covers basic operation, software functionality, and basic configuration of thetransmitter.

10 This section is organized by block information. For detailed information aboutthe function blocks used in the Rosemount 3051S Pressure Transmitter , refer toFOUNDATION Fieldbus Block messagesProcedures and instructions in this section may require special precautions to ensure thesafety of the personnel performing the operation. Refer to the following safety messagesbefore performing operations in this section. WARNINGE xplosionsExplosions could result in death or serious the approvals section of this manual for any restrictions associated with a connecting a communicator in an explosive atmosphere, ensure the instruments inthe segment are installed in accordance with intrinsically safe or non-incendive field an explosion-proof/flameproof installation.