RUPTURE DISC - mitrawp.com

1 Is co-used with our standard Holder, with scored damageprocessing. It is ruptured by reaching to the setup is possible to be manufactured with the same or inverteddirection to the flow. Scored damage types are cross(+), C, andetc. It is operable to 90% of setup pressure, long life, and Nonspark type available in all fields of liquid, gas, and acting type(KSRSF)Reverse acting type(KSRSR)FEATURESS olid disc to be safe and resistance to high temperatureVacuum-resistance, so no requirement of vacuum supportSuitable to mid and high pressureStrong resistance to corrosion due to relative thick materialNew type RUPTURE disc no need of KnifeAvailable in highly flammable place due to its feature of nosparkMonitoring of disc rupturing by adopting the sensor disc andalarm system(Optional)

2 Reverse or forward acting typeSTANDARDSSIZECONNECTIONSETTING RANGEFLUID STATEOPTIONUse and SpecificationASME CODE , KS B ISO 4126, KOSHA CODE, FDC STANDARD1/2" ~ 12"JIS, ANSI, DIN, API, etc5 ~ 700kgf/cmMAX. 593(1100) , SUS, MONEL, NICKEL, INCONEL, TITANIUM, H/C-276, Special ALLOY 10%(but, adjustable to 3% ~ 20%, in requesting)Air, Steam, Liquid, Powder, Polymer, etcPressure gaugeExcess flow V/VLong & Short nippleStud bolt / NutJack handleSensor disc Alarm systemJunction boxPFA/PTFE coatingFerrule connectionKSRSSCORED is co-used with our standard Holder, of a Compositetype disc that a Sealing sheet is inserted in the spacebetween dome type pressure disc and vacuumsupport.

3 It is Non Spark Type, that the artificiallyprocessed regular RUPTURE part is to be ruptured byinward pressure, so it may be available in all fields ofliquid, gas, and operated since a damage from the outercontact of disc does not give any influence on thesetup pressureSuitable to mid and low pressurePossible to manufacture it with very fine gauge ofsetting pressureStrong resistance to corrosion by the materialused in sealing sheetRestricted temperature range due to the materialused in sealing sheet5-folds or more multiple structure with regularrupture partPossible to adopt the additional Full vacuumsupportMonitoring of disc rupturing by

4 Adopting the sensordisc and alarm system(Optional)STANDARDSSIZECONNECTIONS ETTING RANGEFLUID STATEOPTIONUse and SpecificationASME CODE , KS B ISO 4126, KOSHA CODE, FDC STANDARD1/2" ~ 40"JIS, ANSI, DIN, API, ~ 150kgf/cmMAX. 482(900) , SUS, MONEL, NICKEL, INCONEL, TITANIUM, H/C-276, Special ALLOY10%(but, adjustable to 3% ~ 20%, in requesting)Air, Steam, Liquid, Powder, Polymer, etcPressure gaugeExcess flow V/VLong & Short nippleStud bolt / NutJack handleSensor discAlarm systemJunction boxPFA/PTFE coatingFerrule connectionKSRCC omposite Dome RRK type used with our standard Holder is consistof a knife and disc with one.

5 This type was improvedfrom the defect, anxieties for the spark at the time ofexplosion and designed suitably for high-vacuum,high-temperature, low-temperature, high-clean,flammable gas and high-purity gas line conditions. Itexplodes being tear up by the self-attached knifewhen the disc influenced by inner-pressure resistibility for corrosion (Solid Disc)Wide using temperature range (Using the metalplate)Easy handling with knife as the supportSafety(No spark when at the time of burst)Possible to monitor for burst state by applying theSensor/Alarm durability and operating ratio at up to 90%max(Operatingratio=Operating pressure/Explodingpressure)

6 STANDARDSSIZECONNECTIONSETTING RANGEFLUID STATEOPTIONUse and SpecificationASME CODE , KS B ISO 4126, KOSHA CODE, FDC STANDARD1/2" ~ 24"JIS, ANSI, DIN, API, SANITARY, ~20kgf/cm-200~ 600 SUS, MONEL, NICKEL, INCONEL, TITANIUM, H/C-276, Special ALLOY 10%(but, adjustable to 3% ~ 20%, on request)Gas, Vapor, LiquidPressure GaugeExcess Flow V/VLong & Short NippleStud Bolt / NutJack Handle EP FinishedSensor Disc Alarm SystemJunction BoxPFA/PTFE CoatingFerrule ConnectionPolishing FinishedKSRRKR everse Shear is possible to use disc only by equipping with Gasket inspace of connection flange, or co-used with our standardHolder.

7 It is a Flat Type Disc, that a Sealing sheet isinserted in the space between pressure disc and vacuumdisc, and also a Non Spark Type that the artificiallyprocessed regular RUPTURE part is to be ruptured byinward pressure, so it may be available in all fields ofliquid, gas, and operated since a damage from the outer contactof disc does not give any influence on the or type is available by Flange faceSuitable for relatively low pressure; 5-folds or moremultiple structure with regular RUPTURE partPossible to manufacture it with very fine gauge ofsetting pressureStrong resistance to corrosion by the material used insealing sheetManufacturable up to 72large sizeMonitoring of disc rupturing by adopting the sensor discand alarm system(Optional)STANDARDSSIZECONNECTIONS ETTING RANGEFLUID STATEOPTIONUse and SpecificationASME CODE , KS B ISO 4126, KOSHA CODE, FDC STANDARD1" ~ 72"JIS, ANSI, DIN, ~ 35kgf/cmMAX.

8 482(900) , SUS, MONEL, NICKEL, INCONEL, TITANIUM, H/C-276, Special ALLOY10%(but, adjustable to 3% ~ 20%, in requesting)Air, steam, liquid, powder, etcHolderPressure gaugeExcess flow V/VLong & Short nippleStud bolt / NutJack handleSensor discAlarm systemJunction boxPFA/PTFE coatingFerrule connectionRain hoodKSROC omposite Flat TypeSPECIAL RUPTURE TYPECONNECTION TABLEOTHER ORDERED RUPTURE DISCT ypical type of Screw type RUPTURE disc is STP Model, and Holder is composed of three componentsof Base(inlet), Holding ring, Outlet plug.

9 Disc molding is located within Holding ring when it isassembled, which of Base and Holding ring prevent the Disc damage in connecting Outlet plug andraise Sealing effect. It is mainly used in highpressure boiler, autoclave, high-pressure reactor, ultrahigh-pressure tester, ultra high-pressure sterilizer, ultra high-pressure Unit, defense industry, carrefrigerant container, high-pressure gas vessel, and Pilot types are Union type and Welding type, and Disc type is applicable by Tension type,Scored type.

10 And Composite DISCT ighten torque values consultation to of WSP model welding part30slope RingFlat seat-type RingVCR TYPEMODELSTP-1/4 STP-1/2 STP-3/4 STP-1 INLET1/4" MNPT or 1/4" FMNPT1/2" MNPT or 1/2" FMNPT3/4" MNPT or 3/4" FMNPTT1" MNPT or 1" FMNPTOUTLET1/4" MNPT or 1/4" FMNPT1/2" MNPT or 1/2" FMNPT3/4" MNPT or 3/4" FMNPT1" MNPT or 1" FMNPTS crewed type RUPTURE discDisc thickness : ~ bead wide : ~ RUPTURE DISCWELDING DESCRIPTIONA larm System for RUPTURE Disc gives notice the RUPTURE of disc through the Buzzer equipped inAlarm box, by cutting Sensor film to be OFF the line, when the preset pressure of Tank or pipeline(with sensor disc and RUPTURE disc) is surpassed.