S7-400 Automation System Module Data - Siemens

1 Preface General specifications 1. Rack 2. SIMATIC. Power supply modules 3. S7-400 . S7-400 Automation System Module 4. Digital modules data Analog modules 5. Reference Manual Interface modules 6. S5 interface IM 463-2 7. PROFIBUS DP master interface IM 467/IM 467 FO 8. Cable duct and fan subassemblies 9. RS 485 repeater 10. Parameter sets of signal modules A. Diagnostic data of signal modules B. Accessories and spare parts C. Directive on handling electrostatic sensitive D. devices (ESD). List of abbreviations E. Ausgabe 11/2016. A5E00850736-08. Legal information Warning notice System This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol.

2 These notices shown below are graded according to the degree of danger. DANGER. indicates that death or severe personal injury will result if proper precautions are not taken. WARNING. indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION. indicates that minor personal injury can result if proper precautions are not taken. NOTICE. indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified Personnel The product/ System described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

3 Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. Proper use of Siemens products Note the following: WARNING. Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens . Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. Trademarks All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

4 Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG A5E00850736-08 Copyright Siemens AG 2016. Division Process Industries and Drives 11/2016 Subject to change All rights reserved Postfach 48 48. 90026 N RNBERG. GERMANY. Preface Purpose of this manual The information contained in this manual can be used as a reference for operating, for descriptions of the functions, and for the specifications of the signal modules, power supply modules and interface modules of the S7-400 . How to configure, assemble and wire these modules in an S7-400 System is described in the installation manuals for each System .

5 Basic knowledge required This manual requires general knowledge of Automation engineering. In addition, you are required to know how to use computers or devices with similar functions (e. g. programming devices) under Windows 2000 or XP operating systems. Since S7-400 is configured with the STEP 7 basic software, you have to have a good working knowledge of the software. You can acquire this knowledge in the manual "Programming with STEP 7". Read the notes on the safety of electronic controllers in the appendix of the Installation manual . especially when using an S7-400 in safety-relevant areas. Target group This manual is aimed at people with the required qualifications to commission, operate and maintain the products described. Scope of the manual The manual applies to the S7-400 Automation System . Changes compared to the previous version The following changes have been made compared to the previous version of this manual S7-400 Automation System ; Module Specifications, Edition 05/2007 (A5E00850735-04): The revision of the ATEX standard was taken into consideration in chapter Standards, certificates and approvals (Page 13).

6 Approvals You can find details on the certificates and approvals in the chapter General specifications (Page 13) General specifications.. S7-400 Automation System Module data Reference Manual, Ausgabe 11/2016, A5E00850736-08 3. Preface Position in the information landscape This manual forms part of the S7-400 documentation. System Documentation package S7-400 S7-400 Automation System , installation S7-400 Automation System , Module specifications S7-400 Automation System , CPU specifications S7-400 instruction list Further Information You can find further and additional information on the topics in this manual in the following manuals: Programming with STEP 7 ( ). Configuring Hardware and Communication Connections with STEP 7 (http://. ). System and Standard Functions ( 1214574). PROFINET System description ( 19292127). Isochrone mode ( ). Recycling and disposal The S7-400 is environmentally friendly and is thus recyclable.

7 For environmentally compliant recycling and disposal of your discarded device, please contact a company certified for the disposal of electronic waste. Additional support If you have any questions relating to the products described in this manual and cannot find the answers in this documentation, please contact your Siemens partner at the appropriate office or sales and service location. You will find information on who to contact at: Contact partners ( ). A guide to the technical documents for the various SIMATIC products and systems is available at: Documentation ( ). You can find the online catalog and order System under: Catalog ( ). S7-400 Automation System Module data 4 Reference Manual, Ausgabe 11/2016, A5E00850736-08. Preface Training center We offer a range of relevant courses to help you to get started with the SIMATIC S7 Automation System . Please contact your regional training center or our central training center in 90327.

8 Nuremberg, Germany for details: Training ( ). Technical support You can contact Technical Support for all Industry Automation products using the Web form for Support Request Support Request ( ). Additional information about our technical support is available on the Internet at Technical Support ( ). Service & Support on the Internet In addition to our documentation, we offer a comprehensive knowledge base online on the Internet at: Service & Support ( ). There you will find: Our newsletter containing up-to-date information on your products. The latest documents via our search function in Service & Support. An international forum where users and specialists can exchange their experiences. Your local contact partner for Automation and drive technology in our contacts database. Information about on-site service, repairs and spare parts. Much more can be found under "Services".

9 Applications and tools for optimizing operations with SIMATIC S7. Performance measurements for DP and PN, for example, are also published here. S7-400 Automation System Module data Reference Manual, Ausgabe 11/2016, A5E00850736-08 5. Preface S7-400 Automation System Module data 6 Reference Manual, Ausgabe 11/2016, A5E00850736-08. Table of contents 1 General Standards, certificates and Electromagnetic Shipping and storage conditions for modules and backup Mechanical and ambient conditions for S7-400 Information on insulation tests, protection class and degree of 2 Function and design of the The racks UR1 (6ES7400-1 TAx1-0AA0) and UR2 (6ES7400-1 JAx1-0AA0)..29. UR2-H Rack 6ES7400-2 JAx0-0AA0)..31. Rack CR2 (6ES7401-2TA01-0AA0)..33. Rack CR3 (6ES7401-1DA01-0AA0)..35. Racks ER1 (6ES7403-1 TAx1-0AA0) and ER2 (6ES7403-1 JAx1-0AA0)..36. 3 Power supply Common characteristics of the power supply Redundant power supply Backup battery (option).

10 43. Operator controls and Fault/Error messages via Power supply Module PS 407 4A (6ES7407-0DA01-0AA0)..54. Power supply Module PS 407 4A (6ES7407-0DA02-0AA0)..57. Power supply modules PS 407 10A (6ES7407-0KA01-0AA0) and PS 10A R. (6ES7407-0KR00-0AA0)..60. Power supply modules PS 407 10A (6ES7407-0KA02-0AA0) and PS 10A R. (6ES7407-0KR02-0AA0)..63. Power supply Module PS 407 20A (6ES7407-0RA01-0AA0)..66. Power supply Module PS 407 20A (6ES7407-0RA02-0AA0)..68. Power supply Module PS 405 4A (6ES7405-0DA01-0AA0)..70. Power supply Module PS 405 4A (6ES7405-0DA02-0AA0)..72. Power supply modules PS 405 10A (6ES7405-0KA01-0AA0) and PS 405 10A R. (405-0KR00-0AA0)..74. S7-400 Automation System Module data Reference Manual, Ausgabe 11/2016, A5E00850736-08 7. Table of contents Power supply modules PS 405 10A (6ES7405-0KA02-0AA0) and PS 405 10A R. (405-0KR02-0AA0)..76. Power supply Module PS 405 20A (6ES7405-0RA01-0AA0).