Transcription of Safe Work Practices / Procedures / Instruction
1 safe work Practices / Procedures / Instruction EMERGENCY Procedures _____ Site Name In the event of an emergency, the following steps shall be implemented as such: 1. IMMEDIATELY SOUND THE ALARM by activating one of the air horns located on the project or contact one of the company representatives via the two-way radio or cellular phone systems established and used on site. I - LONG BLAST (approx 5 seconds) 3 - SHORT BLASTS (approx 2 sec each) EVACUATE FIRST AID Dial 911 and report your emergency: 2. Assign a designated person to proceed to the nearest access/egress gate to direct incoming emergency personnel services.
2 FIRE PROTOCOL (Fire Extinguisher locations indicated on site map) AT YOUR DISCRETION CONTAIN AND EXTINGUISH THE FIRE IF AT ALL POSSIBLE. IF UNABLE TO CONTAIN, FOLLOW EVACUATION PROTOCOL AND DIAL 911. EVACUATION PROTOCOL (See safety program map for locations) SHOULD THE HORN BE HEARD, ALL PERSONS ON SITE ARE TO IMMEDIATELY LEAVE BY THE NEAREST EXIT IN AN ORDERLY MANNER AND MAKE THEIR WAY TO THE MUSTER STATION AND REMAIN THERE UNTIL GIVEN FURTHER instructions BY EMERGENCY PERSONNEL OR MANAGEMENT. AT THIS TIME, ROLL CALL WILL BE TAKEN TO ENSURE ALL ARE ACCOUNTED FOR.
3
