SAFETY DATA SHEET

1 SAFETY DATA SHEET . mystik JT-6 Hi- temp Grease NLGI No. 2. Section 1. Identification GHS product identifier : mystik JT-6 Hi- temp Grease NLGI No. 2. Synonyms : Lubricant Grease 665005002. Material uses : Lubricant Grease Code : 665005002. MSDS # : 665005002. Supplier's details : CITGO Petroleum Corporation Box 4689. Houston, TX 77210. Emergency telephone : Technical Contact: (800) 248-4684. number (with hours of Medical Emergency: (832) 486-4700. operation) CHEMTREC Emergency: (800) 424-9300. (United States Only). Section 2. Hazards identification OSHA/HCS status : While this material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR ), this SDS contains valuable information critical to the safe handling and proper use of the product. This SDS should be retained and available for employees and other users of this product. Classification of the : AQUATIC HAZARD (LONG-TERM) - Category 4.

2 Substance or mixture GHS label elements Signal word : Warning Hazard statements : Injection under the skin can cause severe injury. Most damage occurs in the first few hours. Initial symptoms may be minimal. Precautionary statements General : Avoid contact with eyes, skin and clothing. Thoroughly wash exposed areas and clothing with soap and water. IF IN EYES: Rinse cautiously with water for several minutes. IF SWALLOWED: Do not induce vomiting. If you feel unwell, seek medical attention and show the label when possible. Keep out of reach of children. Prevention : Avoid release to the environment. Response : Not applicable. Storage : Not applicable. Disposal : Dispose of contents and container in accordance with all local, regional, national and international regulations. Hazards not otherwise : Injection of petroleum hydrocarbons requires immediate medical attention. classified Section 3.

3 Composition/information on ingredients Substance/mixture : Mixture Other means of : Lubricant Grease 665005002. identification CAS number/other identifiers CAS number : Not applicable. Date of issue/Date of revision : 4/10/2018 Date of previous issue : 9/26/2017 Version :3 1/11. mystik JT-6 Hi- temp Grease NLGI No. 2. Section 3. Composition/information on ingredients Ingredient name % CAS number Distillates (petroleum), hydrotreated heavy naphthenic 25 - 50 64742-52-5. Distillates (petroleum), hydrotreated heavy paraffinic 10 - 25 64742-54-7. Residual oils (petroleum), solvent-dewaxed 10 64742-62-7. Lithium, 12-hydroxyoctadecanoate sebacate complexes 10 68815-49-6. Distillates (petroleum), solvent-refined heavy paraffinic 3 64741-88-4. * = Various ** = Mixture ** = Proprietary Any concentration shown as a range is to protect confidentiality or is due to process variation. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

4 Occupational exposure limits, if available, are listed in Section 8. Section 4. First aid measures Description of necessary first aid measures Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10. minutes. Get medical attention if irritation occurs. Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

5 Skin contact : Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse. Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. Most important symptoms/effects, acute and delayed Potential acute health effects Eye contact : No known significant effects or critical hazards.

6 Inhalation : No known significant effects or critical hazards. Skin contact : Injection of pressurized hydrocarbons can cause severe permanent tissue damage. Initial symptoms may be minor. Ingestion : No known significant effects or critical hazards. Over-exposure signs/symptoms Eye contact : No specific data. Inhalation : No specific data. Skin contact : No specific data. Ingestion : No specific data. Indication of immediate medical attention and special treatment needed, if necessary Notes to physician : In the event of injection in underlying tissue, immediate treatment should include extensive incision, debridement and saline irrigation. Inadequate treatment can result in ischemia and gangrene. Early symptoms may be minimal. Specific treatments : Treat symptomatically and supportively. Date of issue/Date of revision : 4/10/2018 Date of previous issue : 9/26/2017 Version :3 2/11.

7 mystik JT-6 Hi- temp Grease NLGI No. 2. Section 4. First aid measures Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. See toxicological information (Section 11). Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing : Use an extinguishing agent suitable for the surrounding fire. media Unsuitable extinguishing : None known. media Specific hazards arising : This material may cause long lasting harmful effects to aquatic life. Fire water from the chemical contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain. Hazardous thermal : Decomposition products may include the following materials: decomposition products carbon dioxide carbon monoxide sulfur oxides metal oxide/oxides Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if for fire-fighters there is a fire.

8 No action shall be taken involving any personal risk or without suitable training. Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing equipment for fire-fighters apparatus (SCBA) with a full face-piece operated in positive pressure mode. Section 6. Accidental release measures Personal precautions, protective equipment and emergency procedures For non-emergency : No action shall be taken involving any personal risk or without suitable training. personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment. For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.

9 See also the information in "For non- emergency personnel". Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the environment if released in large quantities. Methods and materials for containment and cleaning up Small spill : Move containers from spill area. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a licensed waste disposal contractor. Large spill : Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a licensed waste disposal contractor.

10 Note: see Section 1 for emergency contact information and Section 13 for waste disposal. Date of issue/Date of revision : 4/10/2018 Date of previous issue : 9/26/2017 Version :3 3/11. mystik JT-6 Hi- temp Grease NLGI No. 2. Section 7. Handling and storage Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Do not ingest. Avoid contact with eyes, skin and clothing. Avoid release to the environment. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container. Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is occupational hygiene handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking.