Safety Data Sheet acc. to OSHA HCS - met-l …

1 Page 1/8 Safety data Sheetacc. to osha HCSP rinting date 12/03/2015 Reviewed on 04/24 * 1: Identification Product identifier Trade name:Penetrant FP-95A(M) Application of the substance / the mixtureNDT Inspection penetrant Type 1 Methods B, C, & D per AMS-2644/ ASTM E-1417 Details of the supplier of the Safety data Sheet Manufacturer/Supplier: met-l -Chek Company1639 Euclid StreetSanta Monica, California, 90404, : 1-310-450-1111 Fax: 1-310-452-4046E-mail: Information department:Product Safety department Emergency telephone number:Chemtrec +1-800-424-9300 in ; outside 001-703-527-3887* 2: Hazard(s) identification Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Skin Irrit. 2 H315 Causes skin Irrit. 2A H319 Causes serious eye irritation. Label elements Labelling according to Regulation (EC) No 1272/2008 The product is classified and labeled according to the CLP regulation.

2 Hazard pictogramsGHS07 Signal wordWarning Hazard statementsH315 Causes skin Causes serious eye irritation. Precautionary statementsP280 Wear protective eye protection / face thoroughly after +P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, ifpresent and easy to do. Continue +P313If skin irritation occurs: Get medical +P313If eye irritation persists: Get medical advice/attention. Classification system: NFPA ratings (scale 0 - 4)110 Health = 1 Fire = 1 Reactivity = 0(Contd. on page 2) US Page 2/8 Safety data Sheetacc. to osha HCSP rinting date 12/03/2015 Reviewed on 04/24/2015 Trade name:Penetrant FP-95A(M)(Contd. of page 1) HMIS-ratings (scale 0 - 4) HEALTH FIRE REACTIVITY110 Health = 1 Fire = 1 Reactivity = 0 Other hazards Results of PBT and vPvB assessment PBT:Not applicable.

3 VPvB:Not applicable.* 3: Composition/information on ingredients Chemical characterization: Mixtures Description:Mixture of the substances listed below with nonhazardous additions. Dangerous components:64742-53-6 Distillates (petroleum), hydrotreated light naphthenicSkin Irrit. 2, H315; Eye Irrit. 2A, H31950-100%* 4: First-aid measures Description of first aid measures General information:Immediately remove any clothing soiled by the product. After inhalation:Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if case of unconsciousness place patient stably in side position for affected persons into fresh air and keep quiet. After skin contact:Immediately wash with water and soap and rinse skin irritation continues, consult a doctor. After eye contact:Rinse opened eye for several minutes under running water.

4 If symptoms persist, consult a doctor. After swallowing:Do not induce vomiting; immediately call for medical person vomiting while lying on their back should be turned onto their side. Most important symptoms and effects, both acute and delayedNo further relevant information available. Indication of any immediate medical attention and special treatment neededNo further relevant information available. 5: Fire-fighting measures Extinguishing media Suitable extinguishing agents:Water hazeFoamABC powder For Safety reasons unsuitable extinguishing agents:Water spray Special hazards arising from the substance or mixtureCarbon monoxide and carbon dioxide(Contd. on page 3) US Page 3/8 Safety data Sheetacc. to osha HCSP rinting date 12/03/2015 Reviewed on 04/24/2015 Trade name:Penetrant FP-95A(M)(Contd. of page 2) Advice for firefighters Protective equipment:Wear self-contained respiratory protective fully protective suit.

5 6: Accidental release measures Personal precautions, protective equipment and emergency proceduresWear protective equipment. Keep unprotected persons adequate ventilation Environmental precautions:Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Collect liquid in an appropriate container or absorb with an inert material such as vermiculite, dry sand, or earth;DO NOT use combustible in a chemical waste container. Reference to other sectionsSee Section 7 for information on safe Section 8 for information on personal protection Section 13 for disposal information.* 7: Handling and storage Precautions for safe handlingNo special precautions are necessary if used correctly.

6 Information about protection against explosions and fires:Use explosion-proof apparatus / fittings and spark-proof may be hazardous when empty since residue liquid and vapors may be present Conditions for safe storage, including any incompatibilities Storage: Requirements to be met by storerooms and receptacles:No special requirements. Information about storage in one common storage facility:Not required. Further information about storage conditions:Keep receptacle tightly sealed. Specific end use(s)No further relevant information available.* 8: Exposure controls/personal protection Additional information about design of technical systems:No further data ; see item 7. Control parameters Components with limit values that require monitoring at the workplace:The product does not contain any relevant quantities of materials with critical values that have to be monitoredat the workplace.

7 Additional information:The lists that were valid during the creation were used as basis. Exposure controls Personal protective equipment: General protective and hygienic measures:Keep away from foodstuffs, beverages and remove all soiled and contaminated hands before breaks and at the end of contact with the eyes and skin.(Contd. on page 4) US Page 4/8 Safety data Sheetacc. to osha HCSP rinting date 12/03/2015 Reviewed on 04/24/2015 Trade name:Penetrant FP-95A(M)(Contd. of page 3) Breathing equipment:Ventilation System: A system of local or general exhaust is recommended to keepemployee exposure below the airborne exposure limits. If exposure limit is exceeded useorganic vapor respirator (type A), or self contained breathing apparatus. For dry powdernuisance exposue use type P96(US) or type Pi(EU EN143 particle respirator.)

8 For higherlevel protection use type OV/AG/P99(US or ABEK-P2(EU EN 143) respirator cartridges. Protection of hands:Protective glovesThe glove material has to be impermeable and resistant to the product/ the substance/ the of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of qualityand varies from manufacturer to manufacturer. As the product is a preparation of several substances, theresistance of the glove material can not be calculated in advance and has therefore to be checked prior to theapplication. Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.)

9 Eye protection: Safety glassesTightly sealed goggles Body protection:Use protective suit. 9: Physical and chemical properties Information on basic physical and chemical properties General Information Appearance:Form:LiquidColor:Yellow fluorescent Odor:Characteristic Odor threshold:Not determined. pH-value:Not determined. Change in conditionMelting point/Melting point/Boiling range:245 C (473 F) Flammability (solid, gaseous):Not applicable. Ignition temperature:> 204 C (> 399 F) Decomposition temperature:Not determined. Auto igniting:Product is not selfigniting.(Contd. on page 5) US Page 5/8 Safety data Sheetacc. to osha HCSP rinting date 12/03/2015 Reviewed on 04/24/2015 Trade name:Penetrant FP-95A(M)(Contd. of page 4) Danger of explosion:Product does not present an explosion hazard. Explosion limits: Vol % Vol % Vapor pressure at 20 C (68 F) hPa (2 mm Hg) Density at 20 C (68 F) g/cm ( lbs/gal) (ASTM D-1298) Relative densityNot determined.

10 Vapor densityNot determined. Evaporation rateNot determined. Solubility in / Miscibility withWater:Not miscible or difficult to mix. Partition coefficient (n-octanol/water):Not determined. Viscosity:Dynamic:Not at 40 C (104 F) mm /s (ASTM D-445) Solvent content:Organic %VOC % g/l / lb/gl Other informationNo further relevant information available. 10: Stability and reactivity ReactivityNo further relevant information available. Chemical stability Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications. Possibility of hazardous reactionsNo dangerous reactions known. Conditions to avoidNo further relevant information available. Incompatible materials:Avoid contact with acetaldehyde, acids, chlorine, ethylene oxide, isocyanate and strong oxidizing agents Hazardous decomposition products:No dangerous decomposition products known.