Safety Data Sheet - Chem Supply

1 CS: :1 Safety data Sheet4ofInfosafe No 1CH6 QJuly 2014RE-ISSUED by CHEMSUPPI ssue Date :SODIUM SULFATE AnhydrousProduct Name :Not classified as hazardous1. IdentificationSODIUM SULFATE AnhydrousGHS Product IdentifierCHEM- Supply PTY LTD (ABN 19 008 264 211)Company Name38 - 50 Bedford Street GILLMANSA 5013 AustraliaAddressTel: (08) 8440-2000 Fax: (08) 8440-2001 Telephone/Fax NumberPaper pulp, plate and window glass, soaps and detergents, sodium salts, ceramic glazes, processing textile fibers, dyes, tanning, pharmaceuticals, freezing mix, food additive, laboratory reagent, solar heat storage, air-conditioning and pharmaceutical use of the chemical and restrictions on use Name Product CodeOther NamesSODIUM SULFATE Decahydrate LRSL066 Glauber's saltSODIUM SULFATESODIUM SULFATE Anhydrous Granular ARSA192 SODIUM SULFATE Anhydrous Powder ARSA007 SODIUM SULFATE Anhydrous Powder LRSL007 SODIUM SULFATE Anhydrous Powder BPSP007 EMERGENCY CONTACT NUMBER.

2 +61 08 8440 2000 Business hours: 8:30am to 5:00pm, Monday to Friday. Chem- Supply Pty Ltd does not warrant that this product is suitable for any use or purpose. The user must ascertain the suitability of the product before use or application intended purpose. Preliminary testing of the product before use or application is recommended. Any reliance or purported reliance upon Chem- Supply Pty Ltd with respect to any skill or judgement or advice in relation to the suitability of this product of any purpose is disclaimed. Except to the extent prohibited at law, any condition implied by any statute as to the merchantable quality of this product or fitness for any purpose is hereby excluded.

3 This product is not sold by description. Where the provisions of Part V, Division 2 of the Trade Practices Act apply, the liability of Chem- Supply Pty Ltd is limited to the replacement of Supply of equivalent goods or payment of the cost of replacing the goods or acquiring equivalent Information2. Hazard IdentificationNot classified as hazardous according to the Approved Criteria for Classifying Hazardous Substances [NOHSC:1008(2004] 3rd Edition, Safe Work classified as dangerous goods according to the Australian Dangerous Goods Code (ADG).GHS classification of the substance/mixture3. Composition/information on ingredientsSolidChemical Characterization Name Risk Phrase CAS Proportion Hazard SymbolIngredientsSodium Sulfate Decahydrate7727-73-398-100 %Sodium sulfate7757-82-698-100 %4.)

4 First-aid measuresIf inhaled, remove from contaminated area to fresh air immediately. Apply artificial respiration if not breathing. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms mouth thoroughly with water immediately. Give plenty of water to drink. Do not induce vomiting. Seek medical advice if effects affected areas with copious quantities of water. Remove contaminated clothing and wash before re-use. Seek medical advice if effects with copious quantity of water for 15 minutes. Seek medical assistance if symptoms contactMaintain eyewash fountain and Safety shower in work Aid FacilitiesTreat to DoctorFor advice, contact the National Poisons Information Centre (Phone Australia 13 11 26 New Zealand 0800 764 766) or a Information5.

5 Fire-fighting measuresPrint Date: 5/08/2014CS: : :2 Safety data Sheet4ofInfosafe No 1CH6 QJuly 2014RE-ISSUED by CHEMSUPPI ssue Date :SODIUM SULFATE AnhydrousProduct Name :Not classified as hazardousMay librate toxic fumes in fire (sulfur oxides).Hazards from Combustion ProductsSmall fire: Use dry chemical, CO2, water spray or fire: Use water spray, fog or safe to do so, move undamaged containers from the fire area. Cool containers with flooding quantities of water until well after the fire is escaping vapours with water. Prevent runoff entering surface water or MethodsNot considered a fire hazard. Violent explosions occur when potassium sulfate and sodium sulfate are melted with aluminium.

6 Ambient fire may liberate hazardous hazards arising from the chemicalUse suitable protective equipment for surrounding in connection with Fire6. Accidental release measuresDo NOT touch or walk through this product. Stop leak if safe to do so. Prevent entry into waterways, drains, confined areas. Prevent dust & DisposalWear protective clothing specified for normal operations (see Section 8)Personal Protection7. Handling and storageAvoid generation or accumulation of dusts. Use in well ventilated areas away from all ignition sources. In case of insufficient ventilation, wear suitable respiratory equipment. Wash hands and face thoroughly after working with for Safe HandlingKeep containers closed at all times.

7 Keep container tightly closed and in a cool, dry, well-ventilated for safe storage, including any incompatabilitiesDry product can be stored in mild steel. Hot concentrated aqueous solutions are corrosive to mild steel. Wet product or hot solutions are aggressive towards ordinary Information8. Exposure controls/personal protectionA time weighted average (TWA) concentration for an 8 hour day, and 5 day week has not been established by Safe Work Australia for this product. There is a blanket limit of 10 mg/m for dusts or mists when limits have not otherwise been Exposure InformationIn industrial situations maintain the concentrations values below the TWA.

8 This may be achieved by process modification, use of local exhaust ventilation, capturing substances at the source, or other engineering controlsWhere ventilation is not adequate, respiratory protection may be required. Avoid breathing dust, vapours or mists. Respiratory protection should comply with AS 1716 - Respiratory Protective Devices and be selected in accordance with AS 1715 - Selection, Use and Maintenance of Respiratory Protective Devices. Filter capacity and respirator type depends on exposure levels. In event of emergency or planned entry into unknown concentrations a positive pressure, full-facepiece SCBA should be used. If respiratory protection is required, institute a complete respiratory protection program including selection, fit testing, training, maintenance and ProtectionThe use of a face shield, chemical goggles or Safety glasses with side shield protection as appropriate.

9 Must comply with Australian Standards AS 1337 and be selected and used in accordance with AS ProtectionHand protection should comply with AS 2161, Occupational protective gloves - Selection, use and : Rubber or plastic ProtectionFinal choice of personal protective equipment will depend on individual circumstances and/or according to risk assessments Protective EquipmentSafety boots in industrial situations is advisory, foot protection should comply with AS 2210, Occupational protective footwear - Guide to selection, care and clothing or protective clothing should be worn, preferably with an apron. Clothing for protection against chemicals should comply with AS 3765 Clothing for Protection Against Hazardous ProtectionAlways wash hands before smoking, eating or using the toilet.

10 Wash contaminated clothing and other protective equipment before storing or Measures9. Physical and chemical propertiesSolidFormPrint Date: 5/08/2014CS: : :3 Safety data Sheet4ofInfosafe No 1CH6 QJuly 2014RE-ISSUED by CHEMSUPPI ssue Date :SODIUM SULFATE AnhydrousProduct Name :Not classified as hazardousColourless to White crystals, granules or C (anhydrous) C (decahydrate)Melting in WaterSoluble in glycerol, hydrogen iodide. Insoluble in in Organic (anhydrous) (decahydrate)Specific - (50 g/L, H2O, 20 C)Solutions neutral to ComponentNon combustible (anhydrous) (decahydrate)Molecular WeightTaste: Saline tasteOther Information10.