Safety Data Sheet - Concrete Repair Site

1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OFTHE company /UNDERTAKINGP roduct name or Trade name of the substance/preparationCompany/ undertaking identificationSikatop 110 Armatec EpoCem Part A-Emergency telephone numberSika LimitedWatchmead Welwyn Garden CityHertfordshire. AL7 1 BQUnited KingdomManufacturer/Distributor01707 394444 Telephone 329129e-mail address of personresponsible for this of the substance/preparationChemical product for construction and industry::::::Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK) Safety Data SheetHAZARDS IDENTIFICATIONXi; R36/38R43N; R51/53:Human health hazardsIrritating to eyes and skin. May cause sensitisation by skin contact.:Environmental hazardsToxic to aquatic organisms, may cause long-term adverse effects in the section 11 for more detailed information on health effects and :ClassificationThe preparation is classified as dangerous according to Directive 1999/45/EC and its warning phrases:Contains epoxy constituents.

2 See information supplied by the ON family/CharacteristicsWaterthinnable, modified epoxy resin:[1] Substance classified with a health or environmental hazard[2] Substance with a workplace exposure limitIngredient nameCAS number%EC numberClassificationreaction product: bisphenol A-(epichlorhydrin)epoxy resin (number average molecular weight <=700)25068-38-635-50500-033-5Xi; R36/38R43N; R51/53[1]reaction product: bisphenol F-(epichlorhydrin)epoxy resin (number average molecular weight <=700)9003-36-510-20500-006-8Xi; R36/38R43N; R51/53[1]oxirane, mono[(C12-14-alkyloxy)methyl] ; R36/38R43N; R51/53[1]See section 16 for the full text of the R-phrases declared aboveDate of issue:1/622459 MSDS no. 110 Armatec EpoCem Part ON exposure limits, if available, are listed in section not induce vomiting unless directed to do so by medical personnel.

3 Maintain anopen airway. Seek immediate medical contactImmediately flush eyes with plenty of water, occasionally lifting the upper and lowereyelids. Check for and remove any contact lenses. Continue to rinse for at least 10minutes. Get medical contaminated skin with plenty of water. Remove contaminated clothing andshoes. Wash contaminated clothing thoroughly with water before removing it, or weargloves. Continue to rinse for at least 10 minutes. Obtain medical attention ifsymptoms measuresGet medical attention if adverse health effects persist or are to physicianNo specific treatment. Treat symptomatically. Contact poison treatment specialistimmediately if large quantities have been ingested or contact:::::FIRST AID MEASURESSee section 11 for more detailed information on health effects and MEASURESH azardous combustionproductsSpecial exposure hazardsDecomposition products may include the following materials:carbon oxideshalogenated compoundsIn a fire or if heated, a pressure increase will occur and the container may should wear appropriate protective equipment and self-containedbreathing apparatus (SCBA) with a full face-piece operated in positive protectiveequipment for fire-fightersUse an extinguishing agent suitable for the surrounding media:::None :Not precautionsPersonal RELEASE MEASURES::Keep unnecessary and unprotected personnel from entering.

4 Do not touch or walkthrough spilt material. Put on appropriate personal protective equipment (see section8).Avoid dispersal of spilt material and runoff and contact with soil, waterways, drainsand sewers. Inform the relevant authorities if the product has caused environmentalpollution (sewers, waterways, soil or air). Water polluting material. May be harmful tothe environment if released in large leak if without risk. Move containers from spill area. Prevent entry into sewers,water courses, basements or confined areas. Wash spillages into an effluenttreatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material sand, earth, vermiculite or diatomaceous earthand place in container for disposal according to local regulations (see section 13).

5 Large spill:Stop leak if without risk. Move containers from spill area. Absorb with an inertmaterial and place in an appropriate waste disposal spill:HANDLING AND of issue:2/622459 MSDS no. 110 Armatec EpoCem Part AND on appropriate personal protective equipment (see section 8). Eating, drinkingand smoking should be prohibited in areas where this material is handled, stored andprocessed. Workers should wash hands and face before eating, drinking andsmoking. Do not get in eyes or on skin or clothing. Do not breathe vapour or release to the environment. Refer to special instructions/ Safety data in the original container or an approved alternative made from a compatiblematerial, kept tightly closed when not in use. Empty containers retain product residueand can be materialsStore in accordance with local regulations.

6 Store in original container protected fromdirect sunlight in a dry, cool and well-ventilated area, away from incompatiblematerials (see section 10) and food and drink. Keep container tightly closed andsealed until ready for use. Containers that have been opened must be carefullyresealed and kept upright to prevent leakage. Do not store in unlabelled appropriate containment to avoid environmental contamination.::Recommended:Use original nameOccupational exposure limitsRecommended monitoringproceduresExposure limit valuesIf this product contains ingredients with exposure limits, personal, workplaceatmosphere or biological monitoring may be required to determine the effectivenessof the ventilation or other control measures and/or the necessity to use respiratoryprotective equipment.

7 Reference should be made to European Standard EN 689 formethods for the assessment of exposure by inhalation to chemical agents andnational guidance documents for methods for the determination of CONTROLS/PERSONAL PROTECTIONR espiratory protection::No exposure limit value exposurecontrols:Good general ventilation should be sufficient to control worker exposure to airbornecontaminants. If this product contains ingredients with exposure limits, use processenclosures, local exhaust ventilation or other engineering controls to keep workerexposure below any recommended or statutory hands, forearms and face thoroughly after handling chemical products, beforeeating, smoking and using the lavatory and at the end of the working techniques should be used to remove potentially contaminated contaminated clothing before controlsHygiene measures:Hand protectionChemical-resistant, impervious gloves complying with an approved standard shouldbe worn at all times when handling chemical products if a risk assessment indicatesthis is necessary.

8 Recommended: Butyl rubber/nitrile rubber eyewear complying with an approved standard should be used when a riskassessment indicates this is necessary to avoid exposure to liquid splashes, mists,gases or protection:Skin protectionPersonal protective equipment for the body should be selected based on the taskbeing performed and the risks involved and should be approved by a specialist beforehandling this product. Recommended: Use barrier skin cream.:Environmental exposurecontrols:Emissions from ventilation or work process equipment should be checked to ensurethey comply with the requirements of environmental protection legislation. In somecases, fume scrubbers, filters or engineering modifications to the process equipmentwill be necessary to reduce emissions to acceptable special measures of issue:3/622459 MSDS no.

9 110 Armatec EpoCem Part AND CHEMICAL in the following materials: waterFaint pointClosed cup: Not :::::General informationAppearanceImportant health, Safety and environmental informationHazardous decompositionproductsConditions to avoidAvoid release to the environment. Refer to special instructions/ Safety data AND REACTIVITYU nder normal conditions of storage and use, hazardous decomposition productsshould not be product is stable. Under normal conditions of storage and use, hazardouspolymerisation will not specific data.:::Materials to avoid:TOXICOLOGICAL acute health effectsInhalation:May cause to mouth, throat and stomach.:IngestionSkin contact:Irritating to skin. May cause sensitisation by skin to eyes.:Eye contactOnce sensitized, a severe allergic reaction may occur when subsequently exposed tovery low effects:ECOLOGICAL effects:Toxic to aquatic organisms, may cause long-term adverse effects in the generation of waste should be avoided or minimised wherever possible.

10 Disposeof surplus and non-recyclable products via a licensed waste disposal of this product, solutions and any by-products should at all times comply withthe requirements of environmental protection and waste disposal legislation and anyregional local authority requirements. Avoid dispersal of spilt material and runoff andcontact with soil, waterways, drains and sewers.:Methods of disposalPackaging:Completely emptied packaging or practically empty packaging containing dried/curedresidues, once relieved of all pressure can be disposed of as non-hazardous may still contain hazardous residues and disposal should undertaken by alicensed waste disposal practice must be in compliance with local and national laws of issue:4/622459 MSDS no. 110 Armatec EpoCem Part transport regulationsTRANSPORT INFORMATIONADR ClassADRUN30829UN numberPacking groupIIIL abel ClassIMDG9 Packing groupIIIL abel , S-FEmergency schedules(EmS) pollutantIATAIATA ClassLabel :::::::::::Environmentally hazardous substance, liquid, shipping name:UN numberUN3082:UN numberUN3082:Packing groupIII:9 Epoxide resin99 Epoxide resinEpoxide resinContains:Contains::ContainsM6:Class ification codeEnvironmentally hazardous substance, liquid, :Proper shipping nameEnvironmentally hazardous substance, liquid.