Example: bankruptcy

Safety Data Sheet - DAP Products

SDS Number: 1021104 Revision Date: 4/12/2022 SAP Number: Safety data Sheet24 Hour Emergency Phone NumbersMedical/Poison Control:In : Call 1-800-222-1222 Outside : Call your local poisoncontrol centerTransportation/National ResponseCenter:1-800-535-50531-352-323-3 500 NOTE: The National ResponseCenter emergencynumbers to be used only in the event of chemicalemergencies involving a spill, leak, fire, exposure oraccident involving : Provide this information to employees, customers, and users of this product . Read this SDS before handling or disposing of thisproduct. This product is covered by the OSHA Hazard Communication Standard and this document has been prepared in accordance withrequirements of this standard.

Safety Data Sheet 24 Hour Emergency Phone Numbers Medical/Poison Control: In U.S.: Call 1-800-222-1222 Outside U.S.: Call your local poison control center Transportation/National Response Center: 1-800-535-5053 1-352-323-3500 NOTE: The National ResponseCenter emergency numbers to be used only in the event of chemical

Tags:

  Product, Sheet, Data, Safety, Safety data sheet, Dap products

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Safety Data Sheet - DAP Products

1 SDS Number: 1021104 Revision Date: 4/12/2022 SAP Number: Safety data Sheet24 Hour Emergency Phone NumbersMedical/Poison Control:In : Call 1-800-222-1222 Outside : Call your local poisoncontrol centerTransportation/National ResponseCenter:1-800-535-50531-352-323-3 500 NOTE: The National ResponseCenter emergencynumbers to be used only in the event of chemicalemergencies involving a spill, leak, fire, exposure oraccident involving : Provide this information to employees, customers, and users of this product . Read this SDS before handling or disposing of thisproduct. This product is covered by the OSHA Hazard Communication Standard and this document has been prepared in accordance withrequirements of this standard.

2 All abbreviated terms used in this SDS are further described in Section IdentificationProduct Name:Weldwood Original Contact Cement VialRevision Date:4/12/202212/29/2021 product UPC Number:070798001299 Supercedes Date: product Use/Class:AdhesiveManufactured ForDAP Global Boston Street Suite 200 Baltimore, MD 21224-4723888-327-8477 (non - emergency matters)SDS Coordinator: Telephone: 1-800-535-5053,1-352-323-3500, 1-800-222-1222 SDS No:1021104 Preparer:Regulatory and EnvironmentalAffairs2. Hazards IdentificationEMERGENCY OVERVIEW: DANGER!Extremely flammable liquid and vapor. Vapors may cause flash fire or explosion.

3 Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Flammable liquid and vapor. Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Do not smoke. Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Keep container closed and away from heat, sparks, and open flame. Store away from caustics and oxidizers. Avoid breathing vapor. Avoid skin and eye contact.

4 Use only with adequate ventilation. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. Irritating to eyes, respiratory system and skin. Harmful or fatal if swallowed. Aspiration hazard if swallowed - can enter lungs and cause damage. May affect the brain or nervous system causing dizziness, headache or 1 / 7 SDS Number: 1021104 Revision Date: 4/12/2022 SAP Number:GHS ClassificationAcute Tox. 4 Inhalation, Eye Irrit. 2, Flam. Liq. 2, Muta. 1B, Skin Irrit. 2, Skin Sens. 1, STOT SE 3 NESymbol(s) of ProductSignal WordDangerPossible Hazards10% of the mixture consists of ingredients of unknown acute toxicityGHS HAZARD STATEMENTSF lammable Liquid, category 2H225 Highly flammable liquid and Irritation, category 2H315 Causes skin Sensitizer, category 1H317 May cause an allergic skin Irritation, category 2H319 Causes serious eye Toxicity, Inhalation, category 4H332 Harmful if , single exposure, category 3, NEH336 May cause drowsiness or Cell Mutagenicity, category 1BH340 May cause genetic defects.

5 GHS LABEL PRECAUTIONARY STATEMENTSP201 Obtain special instructions before away from heat, hot surfaces, sparks, open flames and other ignition sources. breathing dust/fume/gas/mist/ thoroughly after only outdoors or in a well-ventilated work clothing should not be allowed out of the protective gloves/protective clothing/eye protection/face +P352IF ON SKIN: Wash with plenty of soap and +P361+P353IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin +P340IF INHALED: Remove person to fresh air and keep comfortable for +P351+P338IF IN EYES: Rinse cautiously with water for several minutes.

6 Remove contact lenses, ifpresent and easy to do. Continue +P313IF exposed or concerned: Get medical a POISON CENTER or doctor/physician if you feel treatment (see .. on this label).P332+P313If skin irritation occurs: Get medical +P313If skin irritation or rash occurs: Get medical +P313If eye irritation persists: Get medical off contaminated +P378In case of fire: to +P233 Store in a well-ventilated place. Keep container tightly +P235 Store in a well-ventilated place. Keep locked of SDS PRECAUTIONARY STATEMENTSP240 Ground/bond container and receiving explosion-proof electrical/ventilating/lighting/.

7 / only non-sparking precautionary measures against static contaminated clothing before Composition/Information on IngredientsChemical %GHS SymbolsGHS StatementsEthyl acetate141-78-610-30 GHS02-GHS07H225-319-332-336 Page 2 / 7 SDS Number: 1021104 Revision Date: 4/12/2022 SAP Number:Methyl ethyl ketone (MEK)78-93-310-30 GHS02-GHS07H225-319-332-336VM & P Naphtha8032-32-410-30 GHS06-GHS08H304-331-340 Acetone67-64-110-30 GHS02-GHS07H225-319-336 Phenol-formaldehyde Resin, Novolac9003-35-47-13 GHS07H315-317-319 The text for GHS Hazard Statements shown above (if any) is given in the "Other information" First-aid MeasuresFIRST AID - INHALATION: If inhaled, remove to fresh air.

8 If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately. NOTE: Only trained personnel should administer artificial respiration or give AID - SKIN CONTACT: Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Remove and wash contaminated clothing. DO NOT try to peel the solidified material from the skin or use solvents or thinners to dissolve it. The use of vegetable oil or mineral oil is recommended for removal of this material from the skin. Flush exposed area with water while removing contaminated clothing.

9 Get medical attention if irritation persists. To remove from skin, remove completely with a dry cloth or paper towel, before washing with detergent and AID - EYE CONTACT: If material gets into eyes, flush with water immediately for 15 minutes. Consult a AID - INGESTION: If swallowed, DO NOT INDUCE VOMITING. Get medical attention Fire-fighting MeasuresUNUSUAL FIRE AND EXPLOSION HAZARDS: Eliminate sources of ignition: heat, electrical equipment, sparks and flames. Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Vapors may form explosive mixtures with air.

10 Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an FIREFIGHTING PROCEDURES: Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear. Use water spray to cool exposed surfaces. Cool fire-exposed containers using water MEDIA: Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water6. Accidental Release MeasuresENVIRONMENTAL MEASURES: No InformationSTEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: NOTE: Review fire hazards before proceeding with clean up.


Related search queries