SAFETY DATA SHEET - Jack Byrne

1 SAFETY data SHEET1. IdentificationProduct identifierDiesel Cooling System AdditiveOther means of identificationFIR useAntifreeze/Coolant Additive (Reinhibitor) For Use In Diesel Engine Cooling SystemsRecommended restrictionsNone informationSupplierCompany NameFord Motor CompanyAddressAttention: MSDS Information, Box 1899 Dearborn, Michigan 48121 USAT elephone1-800-392-3673 MSDS telephonenumbersPoison Control Center: USA and Canada: 1-800-959-3673 INFOTRAC (Transportation): USA and Canada 1-800-535-50532. Hazard(s) identificationNot hazardsCategory 2 ASerious eye damage/eye irritationHealth hazardsCategory 2 Germ cell mutagenicityCategory 2 Reproductive toxicityCategory 1 Specific target organ toxicity, single exposureCategory 2 Specific target organ toxicity, repeatedexposureCategory 2 Hazardous to the aquatic environment, acutehazardEnvironmental hazardsCategory 3 Hazardous to the aquatic environment,long-term hazardNot defined hazardsLabel elementsSignal wordDangerHazard statementCauses serious eye irritation.

2 Suspected of causing genetic defects. Suspected of damagingfertility or the unborn child. Causes damage to organs. May cause damage to organs throughprolonged or repeated exposure. Toxic to aquatic life. Harmful to aquatic life with long statementPreventionObtain special instructions before use. Do not handle until all SAFETY precautions have been readand understood. Do not breathe mist or vapor. Wash thoroughly after handling. Do not eat, drinkor smoke when using this product. Avoid release to the environment. Wear protectivegloves/protective clothing/eye protection/face in eyes: Rinse cautiously with water for several minutes.

3 Remove contact lenses, if present andeasy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If exposed:Call a poison center/doctor. If exposed or concerned: Get medical No.: 184845 SDS USIssue Date: 05-15-2015 Version: 011 / 7 StorageStore locked of contents/container in accordance with local/regional/national/international (s) not otherwiseclassified (HNOC)Irritating to respiratory system. May be irritating to the skin. May be harmful if swallowed. May beharmful if absorbed through Composition/information on ingredientsMixturesCAS number%Chemical nameCommon name and synonyms7631-95-0 Disodium molybdate1 - < 37757-79-1 POTASSIUM NITRATE1 - < 37632-00-0sodium nitrite1 - < 3 Specific chemical identity and/or exact percentage (concentration) of composition has been withheld as a trade First-aid measuresInhalationMove to fresh air.

4 Call a physician if symptoms develop or contactImmediately flush with plenty of water for at least 15 minutes while removing contaminated clothingand shoes. Get medical attention if irritation develops and contactImmediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, ifpresent and easy to do. Continue rinsing. If eye irritation persists: Get medical a physician or poison control center immediately. Rinse mouth. Do not induce importantsymptoms/effects, acute anddelayedSevere eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurredvision. Prolonged exposure may cause chronic of immediatemedical attention and specialtreatment neededProvide general supportive measures and treat symptomatically.

5 Keep victim under may be informationIF exposed or concerned: Get medical advice/attention. If you feel unwell, seek medical advice(show the label where possible). Ensure that medical personnel are aware of the material(s)involved, and take precautions to protect themselves. Show this SAFETY data SHEET to the doctor Fire-fighting measuresSuitable extinguishing mediaWater fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Unsuitable extinguishingmediaDo not use water jet as an extinguisher, as this will spread the hazards arising fromthe chemicalDuring fire, gases hazardous to health may be formed. Upon decomposition, this product emitscarbon monoxide, carbon dioxide and/or low molecular weight protective equipmentand precautions for firefightersSelf-contained breathing apparatus and full protective clothing must be worn in case of fightingequipment/instructionsMove containers from fire area if you can do so without methodsUse standard firefighting procedures and consider the hazards of other involved fire hazardsNo unusual fire or explosion hazards Accidental release measuresPersonal precautions,protective equipment andemergency proceduresKeep unnecessary personnel away.

6 Keep people away from and upwind of spill/leak. Wearappropriate protective equipment and clothing during clean-up. Avoid contact with eyes, skin, andclothing. Do not breathe mist or vapor. Do not touch damaged containers or spilled material unlesswearing appropriate protective clothing. Ensure adequate ventilation. Local authorities should beadvised if significant spillages cannot be contained. For personal protection, see section 8 of No.: 184845 SDS USIssue Date: 05-15-2015 Version: 012 / 7 Methods and materials forcontainment and cleaning upThis product is miscible in Spills: Stop the flow of material, if this is without risk.

7 Dike the spilled material, where this ispossible. Cover with plastic SHEET to prevent spreading. Absorb in vermiculite, dry sand or earthand place into containers. Prevent product from entering drains. Following product recovery, flusharea with Spills: Wipe up with absorbent material ( cloth, fleece). Clean surface thoroughly toremove residual return spills to original containers for re-use. For waste disposal, see section 13 of the precautionsAvoid release to the environment. Prevent further leakage or spillage if safe to do so. Avoiddischarge into drains, water courses or onto the ground. Inform appropriate managerial orsupervisory personnel of all environmental Handling and storagePrecautions for safe handlingObtain special instructions before use.

8 Do not handle until all SAFETY precautions have been readand understood. Do not breathe mist or vapor. Do not get in eyes, on skin, on clothing. Avoidprolonged exposure. When using, do not eat, drink or smoke. Pregnant or breastfeeding womenmust not handle this product. Should be handled in closed systems, if possible. Provide adequateventilation. Wear appropriate personal protective equipment. Wash hands thoroughly afterhandling. Avoid release to the environment. Observe good industrial hygiene for safe storage,including any incompatibilitiesStore locked up. Store in original tightly closed container. Store away from incompatible materials(see Section 10 of the SDS).

9 8. Exposure controls/personal protectionOccupational exposure limitsUS. OSHA Table Z-1 Limits for Air Contaminants (29 CFR )ValueComponentsTypePEL5 mg/m3 Disodium molybdate (CAS7631-95-0)US. ACGIH Threshold Limit mg/m3 Respirable molybdate (CAS7631-95-0)Biological limit valuesNo biological exposure limits noted for the ingredient(s).Appropriate engineeringcontrolsProvide eyewash station. Use adequate ventilation to control airborne concentrations below theexposure limits/guidelines. If user operations generate a vapor, dust and/or mist, use processenclosure, local exhaust ventilation, or other engineering controls to control airborne levels belowthe recommended exposure protection measures, such as personal protective equipmentEye/face protectionWear SAFETY glasses with side shields (or goggles).

10 Skin protectionHand protectionSuitable chemical protective gloves should be worn when the potential exists for prolonged orrepeated skin exposure. The choice of an appropriate glove does not only depend on its materialbut also on other quality features and is different from one producer to the other. Nitrile gloves arerecommended. Neoprene gloves are suitable protective clothing. Wear appropriate chemical resistant clothing if protectionIf engineering controls do not maintain airborne concentrations to a level which is adequate toprotect worker health, an approved respirator must be worn. Respirator selection, use andmaintenance should be in accordance with the requirements of OSHA Respiratory ProtectionStandard 29 CFR and/or Canadian Standard CSA hazardsWear appropriate thermal protective clothing, when hygieneconsiderationsAlways observe good personal hygiene measures, such as washing after handling the materialand before eating, drinking, and/or smoking.