Safety Data Sheet - Northwest Missouri State …

1 Aldrich - 524980 Page 1 of 8 SIGMA-ALDRICH Safety data Sheet Version Revision Date 01/30/2014 Print Date 03/03/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product identifiers Product name : Dibutyl phthalate Product Number : 524980 Brand : Aldrich Index-No. : 607-318-00-4 REACH No. : 01-2119493042-44-XXXX CAS-No. : 84-74-2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances Details of the supplier of the Safety data Sheet Company : Sigma-Aldrich 3050 Spruce Street SAINT LOUIS MO 63103 USA Telephone : +1 800-325-5832 Fax : +1 800-325-5052 Emergency telephone number Emergency Phone # : (314) 776-6555 2.

2 HAZARDS IDENTIFICATION Classification of the substance or mixture GHS Classification in accordance with 29 CFR 1910 (OSHA HCS) Reproductive toxicity (Category 1B), H360 Acute aquatic toxicity (Category 1), H400 Chronic aquatic toxicity (Category 1), H410 For the full text of the H-Statements mentioned in this Section, see Section 16. GHS Label elements, including precautionary statements Pictogram Signal word Danger Hazard statement(s) H360 May damage fertility or the unborn child. H410 Very toxic to aquatic life with long lasting effects. Precautionary statement(s) P201 Obtain special instructions before use.

3 P202 Do not handle until all Safety precautions have been read and understood. P273 Avoid release to the environment. P281 Use personal protective equipment as required. P308 + P313 IF exposed or concerned: Get medical advice/ attention. P391 Collect spillage. P405 Store locked up. Aldrich - 524980 Page 2 of 8 P501 Dispose of contents/ container to an approved waste disposal plant. Hazards not otherwise classified (HNOC) or not covered by GHS - none 3. COMPOSITION/INFORMATION ON INGREDIENTS Substances Synonyms : n-Butyl phthalate Phthalic acid dibutyl ester DBP Formula : C16H22O4 Molecular Weight : g/mol CAS-No.

4 : 84-74-2 EC-No. : 201-557-4 Index-No. : 607-318-00-4 Registration number : 01-2119493042-44-XXXX Component Classification Concentration Dibutyl phthalate Included in the Candidate List of Substances of Very High Concern (SVHC) according to Regulation (EC) No. 1907/2006 (REACH) Repr. 1B; Aquatic Acute 1; Aquatic Chronic 1; H360, H410 - For the full text of the H-Statements mentioned in this Section, see Section 16. 4. FIRST AID MEASURES Description of first aid measures General advice Consult a physician. Show this Safety data Sheet to the doctor in out of dangerous area. If inhaled If breathed in, move person into fresh air.

5 If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section ) and/or in section 11 Indication of any immediate medical attention and special treatment needed no data available 5.

6 FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Carbon oxides Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information no data available Aldrich - 524980 Page 3 of 8 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.

7 For personal protection see section 8. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. 7. HANDLING AND STORAGE Precautions for safe handling Avoid inhalation of vapour or mist. For precautions see section Conditions for safe storage, including any incompatibilities Keep container tightly closed in a dry and well-ventilated place.

8 Containers which are opened must be carefully resealed and kept upright to prevent leakage. Specific end use(s) Apart from the uses mentioned in section no other specific uses are stipulated 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Component CAS-No. Value Control parameters Basis Dibutyl phthalate 84-74-2 TWA 5 mg/m3 USA. ACGIH Threshold Limit Values (TLV) Remarks Eye & Upper Respiratory Tract irritation Testicular damage TWA 5 mg/m3 USA. OSHA - TABLE Z-1 Limits for Air Contaminants - TWA 5 mg/m3 USA. Occupational Exposure Limits (OSHA) - Table Z-1 Limits for Air Contaminants TWA 5 mg/m3 USA.

9 NIOSH Recommended Exposure Limits Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and Safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product.

10 Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Aldrich - 524980 Page 4 of 8 Full contact Material: Nature latex/chloroprene Minimum layer thickness: mm Break through time: > 480 min Material tested:Lapren (KCL 706 / Aldrich Z677558, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: mm Break through time: 77 min Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves.