SAFETY DATA SHEET POLYESTER RESIN - Tetconnect

1 Revision date: 26/05/2016 Revision: 7 Supersedes date: 16/07/2015. SAFETY data SHEET . POLYESTER RESIN . SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifier Product name POLYESTER RESIN . Product number POR001, POR002. Internal identification C. Relevant identified uses of the substance or mixture and uses advised against Identified uses POLYESTER RESIN . Details of the supplier of the SAFETY data SHEET Supplier TETROSYL LIMITED. Bury Lancashire England BL9 7NY. 0161 764 5981. 0161 797 5899. Emergency telephone number SECTION 2: Hazards identification Classification of the substance or mixture Classification (EC 1272/2008). Physical hazards Flam. Liq. 3 - H226.

2 Health hazards Acute Tox. 4 - H332 Skin Irrit. 2 - H315 Eye Irrit. 2 - H319 Repr. 2 - H361d STOT RE 1 - H372. Environmental hazards Not Classified Human health See Section 11 for additional information on health hazards. Label elements Pictogram Signal word Danger Hazard statements H226 Flammable liquid and vapour. H315 Causes skin irritation. H319 Causes serious eye irritation. H332 Harmful if inhaled. H361d Suspected of damaging the unborn child. H372 Causes damage to organs through prolonged or repeated exposure. 1/7. Revision date: 26/05/2016 Revision: 7 Supersedes date: 16/07/2015. POLYESTER RESIN . Precautionary statements P101 If medical advice is needed, have product container or label at hand.

3 P102 Keep out of reach of children. P201 Obtain special instructions before use. P202 Do not handle until all SAFETY precautions have been read and understood. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground/ bond container and receiving equipment. P241 Use explosion-proof electrical equipment. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P260 Do not breathe vapour/ spray. P264 Wash contaminated skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.

4 P302+P352 IF ON SKIN: Wash with plenty of water. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/ attention. P312 Call a POISON CENTER/ doctor if you feel unwell. P314 Get medical advice/ attention if you feel unwell. P332+P313 If skin irritation occurs: Get medical advice/ attention. P337+P313 If eye irritation persists: Get medical advice/ attention. P362+P364 Take off contaminated clothing and wash it before reuse.

5 P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P403+P235 Store in a well-ventilated place. Keep cool. P405 Store locked up. P501 Dispose of contents/ container in accordance with national regulations. Contains STYRENE. Supplementary precautionary P261 Avoid breathing vapour/ spray. statements P321 Specific treatment (see medical advice on this label). Other hazards SECTION 3: Composition/information on ingredients Mixtures STYRENE 30-<60%. CAS number: 100-42-5 EC number: 202-851-5 REACH registration number: 01- 2119457861-32-0017. Classification Flam. Liq. 3 - H226. Acute Tox. 4 - H332. Skin Irrit. 2 - H315. Eye Irrit. 2 - H319. Repr. 2 - H361d STOT RE 1 - H372.

6 The full text for all hazard statements is displayed in Section 16. 2/7. Revision date: 26/05/2016 Revision: 7 Supersedes date: 16/07/2015. POLYESTER RESIN . SECTION 4: First aid measures Description of first aid measures General information Remove affected person from source of contamination. Get medical attention immediately. Inhalation Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Get medical attention. Symptoms of lung oedema (shortness of breath) may develop up to 24 hours after exposure. Show this SAFETY data SHEET to the medical personnel. Place unconscious person on the side in the recovery position and ensure breathing can take place. Ingestion Rinse mouth thoroughly with water.

7 Give plenty of water to drink. Give milk instead of water if readily available. Keep affected person under observation. Do not induce vomiting. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention immediately. Show this SAFETY data SHEET to the medical personnel. Skin contact Remove contaminated clothing immediately and wash skin with soap and water. Consult a physician for specific advice. Rinse immediately with plenty of water. While rinsing, remove clothing not adhering to the affected area. Get medical attention. Eye contact Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes.

8 Get medical attention immediately. Most important symptoms and effects, both acute and delayed Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures Extinguishing media Suitable extinguishing media Use fire-extinguishing media suitable for the surrounding fire. Special hazards arising from the substance or mixture Specific hazards In case of fire, toxic and corrosive gases may be formed. Advice for firefighters Protective actions during Thermal decomposition or combustion products may include the following substances: Toxic firefighting and corrosive gases or vapours. Special protective equipment Leave danger zone immediately. for firefighters SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures Personal precautions Wear protective clothing as described in Section 8 of this SAFETY data SHEET .

9 In case of spills, beware of slippery floors and surfaces. Environmental precautions Environmental precautions Collect and dispose of spillage as indicated in Section 13. Methods and material for containment and cleaning up Methods for cleaning up For waste disposal, see Section 13. Wear protective clothing as described in Section 8 of this SAFETY data SHEET . Absorb spillage with non-combustible, absorbent material. Provide adequate ventilation. Avoid the spillage or runoff entering drains, sewers or watercourses. Reference to other sections SECTION 7: Handling and storage Precautions for safe handling 3/7. Revision date: 26/05/2016 Revision: 7 Supersedes date: 16/07/2015. POLYESTER RESIN . Usage precautions Read and follow manufacturer's recommendations.

10 Remove contamination with soap and water or recognised skin cleansing agent. Do not use organic solvents. Good personal hygiene procedures should be implemented. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site. Do not eat, drink or smoke when using the product. Conditions for safe storage, including any incompatibilities Storage precautions Keep away from heat, sparks and open flame. Store in tightly-closed, original container in a dry, cool and well-ventilated place. Specific end use(s). SECTION 8: Exposure Controls/personal protection Control parameters Occupational exposure limits STYRENE. Long-term exposure limit (8-hour TWA): WEL 100 ppm 430 mg/m.