SAFETY DATA SHEET - rbnainfo.com

1 Lysol Brand Kills of Viruses & Bacteria** Mold & Mildew Blaster Bleach & Shine Multipurpose CleanerSAFETY data SHEETP roduct nameDistributed byProduct use1. Product and company identification:::D0004478 :SDS #EPA ID #::292-017A (0003419 )UPC Code / Sizes:19200-78915-30 (32 oz. Trigger HDPE Bottle):Lysol Brand Kills of Viruses & Bacteria** Mold & Mildew Blaster Bleach & Shine :Website: telephone number (Medical)Emergency telephone number (Transport):1-800-338-61671-800-424-9300 ( & Canada) CHEMTREC Outside and Canada (North America), call Chemtrec:703-527-3887:This SDS is designed for workplace employees, emergency personnel and for other conditions and situations where there is greater potential for large-scale or prolonged exposure, in accordance with the requirements of USDOL Occupational SAFETY and Health SDS is not applicable for consumer use of our products.

2 For consumer use, all precautionary and first aid language is provided on the product label in accordance with the applicable government regulations, and shown in Section 15 of this Benckiser Corporate Center IV 399 Interpace Parkway ( Box 225)Parsippany, New Jersey 07054-0225 +1 973 404 2600 Conforms to USDOL OSHA 29 CFR HAZCOM2. Hazards identificationClassification of the substance or mixtureCORROSIVE TO METALS - Category 1 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2 BSKIN SENSITIZATION - Category 1:Signal word:WarningHazard statements:May be corrosive to skin and eye cause an allergic skin pictograms:GHS label elements1/1331/03 of issue:SDS #FF0003419 (D0004478):Code #D0004478 :D0004478 to USDOL OSHA 29 CFR HAZCOM2.

3 Hazards identificationSupplemental label elements:None not otherwise classified:None :Wear protective gloves. Wear eye or face protection. Keep only in original breathing vapor. Wash hands thoroughly after handling. Contaminated work clothing should not be allowed out of the :Absorb spillage to prevent material damage. IF ON SKIN: Wash with plenty of soap and water. Take off contaminated clothing. Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical :Store in corrosive resistant container with a resistant inner :Dispose of contents and container in accordance with all local, regional, national and international regulations.

4 :Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at statements3. Composition/information on ingredientsMixture:Substance/mixturesodi um hypochlorite, solution1 - hydroxide< nameCAS number%There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this concentration shown as a range is to protect confidentiality or is due to batch First aid measuresImmediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses.

5 Continue to rinse for at least 10 minutes. Get medical with plenty of soap and water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear to rinse for at least 10 minutes. Get medical attention. In the event of any complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes thoroughly before victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe.

6 If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar,tie, belt or contactSkin contactInhalation:::Description of necessary first aid measures2/1331/03 of issue:SDS #FF0003419 (D0004478):Code #D0004478 :D0004478 to USDOL OSHA 29 CFR HAZCOM4. First aid measuresWash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel.

7 If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious unconscious, place in recovery position and get medical attention an open airway. Loosen tight clothing such as a collar, tie, belt or :Protection of first-aiders:No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear to physician:Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or treatments:No specific important symptoms/effects, acute and delayedInhalation:No known significant effects or critical to mouth, throat and stomach.

8 :IngestionSkin contact:Causes skin irritation. May cause an allergic skin serious eye irritation.:Eye contactOver-exposure signs/symptomsSkin contactIngestionInhalationNo specific specific symptoms may include the following:irritationredness:::Eye contact:Adverse symptoms may include the following:pain or irritationwateringrednessPotential acute health effectsSee toxicological information (Section 11)Indication of immediate medical attention and special treatment needed, if necessary5. Fire-fighting measuresSpecific hazards arising from the chemicalIn a fire or if heated, a pressure increase will occur and the container may an extinguishing agent suitable for the surrounding media:None extinguishing media:Unsuitable extinguishing media:3/1331/03 of issue:SDS #FF0003419 (D0004478):Code #D0004478 :D0004478 to USDOL OSHA 29 CFR HAZCOM5.

9 Fire-fighting measuresPromptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable thermal decomposition productsDecomposition products may include the following materials:halogenated compoundsmetal oxide/oxidesFire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure protective equipment for fire-fighters::Special protective actions for fire-fighters:6. Accidental release measuresEnvironmental precautionsPersonal precautions, protective equipment and emergency proceduresStop leak if without risk.

10 Move containers from spill area. Absorb spillage to prevent material damage. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.::No action shall be taken involving any personal risk or without suitable surrounding areas.