SAFETY DATA SHEET - Riepert Salt

1 SAFETY data SHEET1. IdentificationProduct identifierDiamond Crystal Bright & Soft Salt PelletsOther means of identificationSDS numberND14 SynonymsDiamond Crystal Zeo-Tabs . * Private Label Water Conditioning Pellets. * Sodium Chloride(Salt), useSalt may be intended for food or animal feed (agricultural) as well as several industrial applicationsincluding deicing and water restrictionsNone informationManufacturerCompany nameCargill IncorporatedAddressMinneapolis, MN telephonenumberCHEMTREC (800) 424-93002.

2 Hazard(s) identificationNot hazardsNot hazardsNot defined hazardsLabel symbolSignal statementThe mixture does not meet the criteria for statementPreventionObserve good industrial hygiene hands after away from incompatible of waste and residues in accordance with local authority (s) not otherwiseclassified (HNOC)None Composition/information on ChlorideCAS number%Chemical Hexametaphosphate4. First-aid measuresInhalationIf dust from the material is inhaled, remove the affected person immediately to fresh air.

3 Call aphysician if symptoms develop or contactWash off with soap and water. Get medical attention if irritation develops and contactRinse with water. Get medical attention if irritation develops and one or two glasses of water if patient is alert and able to swallow. Get medical attention ifsymptoms Crystal Bright & Soft Salt PelletsSDS US922116 Version #: 01 Revision date: - Issue date: 12-August-20141 / 6 Most importantsymptoms/effects, acute anddelayedDirect contact with eyes may cause temporary of immediatemedical attention and specialtreatment neededTreat informationEnsure that medical personnel are aware of the material(s) involved, and take precautions toprotect Fire-fighting measuresSuitable extinguishing mediaWater fog.

4 Foam. Dry chemical powder. Carbon dioxide (CO2).Unsuitable extinguishingmediaDo not use water jet as an extinguisher, as this will spread the hazards arising fromthe chemicalDuring fire, gases hazardous to health may be protective equipmentand precautions for firefightersSelf-contained breathing apparatus and full protective clothing must be worn in case of water spray to cool unopened methodsUse standard firefighting procedures and consider the hazards of other involved fire hazardsThis product is not flammable or Accidental release measuresPersonal precautions,protective equipment andemergency proceduresKeep unnecessary personnel away.

5 Avoid inhalation of dust from the spilled material. Use aNIOSH/MSHA approved respirator if there is a risk of exposure to dust/fume at levels exceedingthe exposure limits. Do not touch damaged containers or spilled material unless wearingappropriate protective clothing. For personal protection, see section 8 of the and materials forcontainment and cleaning upIf sweeping of a contaminated area is necessary use a dust suppressant agent which does notreact with the product. Collect dust using a vacuum cleaner equipped with HEPA filter.

6 Minimizedust generation and accumulation. Avoid release to the environment. Following product recovery,flush area with water. For waste disposal, see section 13 of the precautionsAvoid discharge into drains, water courses or onto the Handling and storagePrecautions for safe handlingProvide appropriate exhaust ventilation at places where dust is formed. Minimize dust generationand accumulation. Avoid breathing dust. Avoid contact with eyes. Avoid contact with water andmoisture. Keep away from strong acids.

7 Practice good for safe storage,including any incompatibilitiesStore in original tightly closed container. Store in a well-ventilated place. Store away fromincompatible materials (see Section 10 of the SDS). Becomes hygroscopic at 70-75% relativehumidity. Avoid humid or wet conditions as product will cake and become Exposure controls/personal protectionOccupational exposure limitsNo exposure limits noted for ingredient(s).Biological limit valuesNo biological exposure limits noted for the ingredient(s).

8 Appropriate engineeringcontrolsVentilation should be sufficient to effectively remove and prevent buildup of any dusts or fumesthat may be generated during handling or thermal protection measures, such as personal protective equipmentEye/face protectionUnvented, tight fitting goggles should be worn in dusty protectionHand protectionWear appropriate chemical resistant suitable protective protectionUse a NIOSH/MSHA approved respirator if there is a risk of exposure to dust/fume at levelsexceeding the exposure limits.

9 If engineering controls do not maintain airborne concentrationsbelow recommended exposure limits (where applicable) or to an acceptable level (in countrieswhere exposure limits have not been established), an approved respirator must be hazardsWear appropriate thermal protective clothing, when hygieneconsiderationsAlways observe good personal hygiene measures, such as washing after handling the materialand before eating, drinking, and/or smoking. Routinely wash work clothing and protectiveequipment to remove Crystal Bright & Soft Salt PelletsSDS US922116 Version #: 01 Revision date: - Issue date: 12-August-20142 / 69.

10 Physical and chemical propertiesAppearanceCompressed white odorOdor thresholdNot point/freezing F (801 C)Initial boiling point and boilingrange2669 F (1465 C) (760 mmHg)Flash pointNot rateNot (solid, gas)Not flammability or explosive limitsFlammability limit - lower(%)Not limit - upper(%)Not limit - lower (%)Not limit - upper (%)Not mm Hg ( F (747 C))Vapor densityNot (H2O = 1)Solubility(ies)Solubility (water) %Partition coefficient(n-octanol/water)Not temperatureNot temperatureNot informationBulk density53 - 83 lb/ft Molecular formulaNaClMolecular in aqueous solution6 - 910.