Safety Data Sheet (SDS) - Medication Waste Disposal

1 Page 1/9 Safety data Sheet (SDS)OSHA HazCom Standard 29 CFR (g) and GHS Rev date 05/24/2017 Reviewed on 05/24 Identification Product Identifier Trade name: RX Destroyer Hardener Relevant identified uses of the substance or mixture and uses advised against:No further relevant information available. Product DescriptionNo further relevant information available. Details of the Supplier of the Safety data Sheet : Manufacturer/Supplier:C2R Global Manufacturing Blackhawk Drive, Unit ABurlington, WI 53105 Phone: 262-363-7004 Emergency telephone number:262-363-70042 Hazard(s) Identification Classification of the substance or mixture:d~ GHS07 Skin Irrit. 2 H315 Causes skin SE 3 H335 May cause respiratory Irrit.

2 2B H320 Causes eye irritation. Label elements: GHS label elementsThe substance is classified and labeled according to the Globally Harmonized System (GHS). Hazard pictograms:d~ GHS07 Signal word:Warning Hazard-determining components of labeling:2-Propenoic acid, homopolymer sodium salt Hazard statements:H315+H320 Causes skin and eye cause respiratory irritation. Precautionary statements:P261 Avoid breathing dust/fume/gas/mist/ thoroughly after only outdoors or in a well-ventilated protective +P352IF ON SKIN: Wash with plenty of +P340IF INHALED: Remove person to fresh air and keep comfortable for +P351+P338 If in eyes: Rinse cautiously with water for several minutes.

3 Remove contact lenses, ifpresent and easy to do. Continue a POISON CENTER/doctor if you feel treatment (see supplementary first aid instructions on this Safety data Sheet ).P332+P313If skin irritation occurs: Get medical advice/attention.(Contd. on page 2)Page 2/9 Safety data Sheet (SDS)OSHA HazCom Standard 29 CFR (g) and GHS Rev date 05/24/2017 Reviewed on 05/24/2017 Trade name: RX Destroyer +P313If eye irritation persists: Get medical +P364 Take off contaminated clothing and wash it before +P233 Store in a well-ventilated place. Keep container tightly locked of contents/container in accordance with local/regional/national/internationalreg ulations. Classification system: NFPA ratings (scale 0 - 4)100 Health = 1 Fire = 0 Reactivity = 0 HMIS-ratings (scale 0 - 4) HEALTH FIRE REACTIVITY100 Health = 1 Fire = 0 Physical Hazard = 0 Hazard(s) not otherwise classified (HNOC):None known3 Composition/Information on Ingredients Chemical characterization: Mixtures Description:Mixture: consisting of non-regulated material.

4 Dangerous Components:9003-04-7 2-Propenoic acid, homopolymer sodium saltd~ Skin Irrit. 2, H315; STOT SE 3, H335; Eye Irrit. 2B, H32090-99%4 First-Aid Measures Description of first aid measures: General information:Symptoms of poisoning may occur after exposure to dust, fumes or particulates; seek medical attention iffeeling unwell. After inhalation:Supply fresh air. If required, provide artificial respiration. Consult doctor if symptoms case of unconsciousness place patient stably in side position for transportation. After skin contact:Immediately wash with water and soap and rinse skin irritation occurs, consult a doctor. After eye contact:Rinse opened eye for at least 15 minutes under running water.

5 If symptoms persist, consult a doctor. After swallowing:Ingestion will induce vomiting Information for doctor: Most important symptoms and effects, both acute and delayed:No further relevant information available. Indication of any immediate medical attention and special treatment needed:No further relevant information available.* 5 Fire-Fighting Measures Extinguishing media: Suitable extinguishing agents:Use fire fighting measures that suit the environment.(Contd. on page 3)Page 3/9 Safety data Sheet (SDS)OSHA HazCom Standard 29 CFR (g) and GHS Rev date 05/24/2017 Reviewed on 05/24/2017 Trade name: RX Destroyer Special hazards arising from the substance or mixture:Extremely slippery conditions are created if spilled product comes in contact with water.

6 Advice for firefighters: Protective equipment:As in any fire, wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent)and full protective gear to prevent contact with skin and Accidental Release Measures Personal precautions, protective equipment and emergency procedures:Wear protective equipment. Keep unprotected persons away. Environmental precautions:Do not allow to enter sewers/surface or ground water. Methods and material for containment and cleaning up:Use caution after contact of product with water as extremely slippery conditions will result. Residuals may beflushed with water into the drain for normal wastewater treatment.

7 This is a non-hazardous Waste suitable fordisposal in an approved solid Waste landfill. Reference to other sections:See Section 7 for information on safe Section 8 for information on personal protection Section 13 for Disposal Handling and Storage Handling Precautions for safe handling:No special precautions are necessary if used correctly. Information about protection against explosions and fires:No special measures required. Conditions for safe storage, including any incompatibilities: Storage Requirements to be met by storerooms and receptacles:Store in a cool, dry in the original container. Information about storage in one common storage facility:Not required.

8 Further information about storage conditions:Keep receptacle tightly sealed. Specific end use(s):No further relevant information Exposure Controls/Personal Protection Additional information about design of technical systems:No further data ; see section 7. Control parameters: Components with occupational exposure limits:The product does not contain any relevant quantities of materials with critical values that have to be monitoredat the workplace. Additional information:The lists that were valid during the creation of this SDS were used as basis. Exposure controls:Ventilation must be adequate to maintain the ambient workplace atmosphere below the exposure limit(s)outlined in the SDS.

9 Where acceptable concentrations cannot be maintained by general mechanicalventilation, local exhaust ventilation is recommended. Personal protective equipment: General protective and hygienic measures:Keep away from foodstuffs, beverages and remove all soiled and contaminated clothing and wash before hands before breaks and at the end of contact with the eyes and skin.(Contd. on page 4)Page 4/9 Safety data Sheet (SDS)OSHA HazCom Standard 29 CFR (g) and GHS Rev date 05/24/2017 Reviewed on 05/24/2017 Trade name: RX Destroyer Breathing equipment:Not respirator with a high efficiency filter if particulate concentrations in the work area exceed mg/m3over an eight-hour period.

10 Protection of hands:_SProtective glovesThe glove material has to be impermeable and resistant to the product/ the substance/ the to missing tests no recommendation to the glove material can be given for the product/ the preparation/the chemical glove material based on penetration times, rates of diffusion and degradation. Material of gloves:The selection of the suitable gloves does not only depend on the material, but also on further marks of qualityand varies from manufacturer to manufacturer. As the product is a preparation of several substances, theresistance of the glove material cannot be calculated in advance and has therefore to be checked prior to theapplication.