SAFETY DATA SHEET Smart Glass - Autosmart …

1 Revision date: 16/06/2016 Revision: 1 SAFETY data SHEETS mart GlassAccording to Preparation of SAFETY data Sheets for Hazardous Chemicals Code of Practice, December 2011 SECTION 1: Identification: Product identifier and chemical identityProduct identifierProduct nameSmart GlassRelevant identified uses of the substance or mixture and uses advised againstApplicationWindow Glass advised againstFor professional use only. This product is not recommended for any industrial, professional orconsumer use other than the Identified uses of the supplier of the SAFETY data sheetSupplierAutosmart Australia11 Darrambal CloseRathminesNSW : 02 49 75 14 88 (Mon to Fri, 08:00 - 16:00 AEST) (General Information.)

2 TransportInformation. Mild Medical PersonMr. Russell ButlerEmergency telephone numberEmergency telephoneEmergency No: +44 7808 971321 (24hrs) ( Autosmart International, UK)General Information. Transport Information. Mild medical Information:-Tel: 02 49 75 14 88 (Mon to Fri, 08:00 - 16:00 AEST)National emergency telephonenumberPoison Information Hotline: 13 11 26 SECTION 2: Hazard(s) identificationClassification of the substance or mixturePhysical hazardsNot ClassifiedHealth hazardsNot ClassifiedEnvironmental hazardsNot ClassifiedLabel elementsHazard statementsNC Not ClassifiedPrecautionary statementsP280 Wear protective Avoid breathing +P351+P338 IF IN EYES: Rinse cautiously with water for several minutes.

3 Removecontact lenses, if present and easy to do. Continue Dispose of contents/ container in accordance with national date: 16/06/2016 Revision: 1 Smart GlassOther hazardsThis product does not contain any substances classified as PBT or 3: Composition and information on ingredientsMixtures2-BUTOXYETHANOL5<10%C AS number: 111-76-2 Substance with a Community workplace exposure Tox. 4 - H302 Acute Tox. 4 - H312 Acute Tox. 4 - H332 Skin Irrit. 2 - H315 Eye Irrit. 2A - H319 ETHANOL3<5%CAS number: 64-17-5 ClassificationFlam. Liq. 2 - < number: 67-63-0 Substance with a Community workplace exposure Liq. 2 - H225 Eye Irrit. 2A - H319 STOT SE 3 - < number: 78-93-3 ClassificationFlam. Liq.

4 2 - H225 Eye Irrit. 2A - H319 STOT SE 3 - H336 The full text for all hazard statements is displayed in Section 4: First aid measuresDescription of first aid measuresGeneral informationGet medical attention if any discomfort continues. Show this SAFETY data SHEET to the affected person to fresh air and keep warm and at rest in a position comfortable forbreathing. Maintain an open airway. Loosen tight clothing such as collar, tie or date: 16/06/2016 Revision: 1 Smart GlassIngestionRinse mouth thoroughly with water. Remove any dentures. Give a few small glasses of wateror milk to drink. Stop if the affected person feels sick as vomiting may be dangerous. Do notinduce vomiting unless under the direction of medical personnel.

5 If vomiting occurs, the headshould be kept low so that vomit does not enter the lungs. Never give anything by mouth to anunconscious person. Maintain an open airway. Loosen tight clothing such as collar, tie or ContactRemove affected person from source of contamination. Rinse immediately with plenty contactRinse immediately with plenty of water. Remove any contact lenses and open eyelids wideapart. Continue to rinse for at least 10 of first aidersFirst aid personnel should wear appropriate protective equipment during any important symptoms and effects, both acute and delayedGeneral informationSee Section 11 for additional information on health hazards. The severity of the symptomsdescribed will vary dependent on the concentration and the length of inhalation of high concentrations may damage respiratory symptoms, including upset stomach.

6 Fumes from the stomach contents maybe inhaled, resulting in the same symptoms as contactProlonged contact may cause dryness of the contactMay cause temporary eye of any immediate medical attention and special treatment neededNotes for the doctorTreat treatmentsNo special treatment 5: Firefighting measuresExtinguishing mediaSuitable extinguishing mediaThe product is not flammable. Extinguish with alcohol-resistant foam, carbon dioxide, drypowder or water fog. Use fire-extinguishing media suitable for the surrounding extinguishingmediaDo not use water jet as an extinguisher, as this will spread the hazards arising from the substance or mixtureSpecific hazardsContainers can burst violently or explode when heated, due to excessive pressure combustionproductsThermal decomposition or combustion products may include the following substances:Harmful gases or for firefightersProtective actions duringfirefightingAvoid breathing fire gases or vapours.

7 Evacuate area. Cool containers exposed to heat withwater spray and remove them from the fire area if it can be done without risk. Cool containersexposed to flames with water until well after the fire is out. If a leak or spill has not ignited, usewater spray to disperse vapours and protect men stopping the leak. Control run-off water bycontaining and keeping it out of sewers and watercourses. If risk of water pollution occurs,notify appropriate protective equipmentfor firefightersWear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protectiveclothing. Firefighter's clothing conforming to Australia/New Zealand Standards AS/NZS 4967(for clothing) AS/NZS 1801 (for helmets), AS/NZS 4821 (for protective boots), AS/NZS 1801(for protective gloves) will provide a basic level of protection for chemical date: 16/06/2016 Revision: 1 Smart GlassSECTION 6: Accidental release measuresPersonal precautions, protective equipment and emergency proceduresPersonal precautionsNo action shall be taken without appropriate training or involving any personal risk.

8 Keepunnecessary and unprotected personnel away from the spillage. Wear protective clothing asdescribed in Section 8 of this SAFETY data SHEET . Follow precautions for safe handlingdescribed in this SAFETY data SHEET . Wash thoroughly after dealing with a precautionsEnvironmental precautionsAvoid discharge to the aquatic environment. Large Spillages: Inform the relevant authorities ifenvironmental pollution occurs (sewers, waterways, soil or air).Methods and material for containment and cleaning upMethods for cleaning upWear protective clothing as described in Section 8 of this SAFETY data SHEET . Clear up spillsimmediately and dispose of waste safely. Reuse or recycle products wherever the spillage from upwind.

9 Small Spillages: If the product is soluble in water, dilutethe spillage with water and mop it up. Alternatively, or if it is not water-soluble, absorb thespillage with an inert, dry material and place it in a suitable waste disposal container. LargeSpillages: If leakage cannot be stopped, evacuate area. Flush spilled material into an effluenttreatment plant, or proceed as follows. Contain and absorb spillage with sand, earth or othernon-combustible material. Place waste in labelled, sealed containers. Clean contaminatedobjects and areas thoroughly, observing environmental regulations. The contaminatedabsorbent may pose the same hazard as the spilled material. Flush contaminated area withplenty of water.

10 Wash thoroughly after dealing with a spillage. Dispose of waste to licensedwaste disposal site in accordance with the requirements of the local Waste Disposal to other sectionsReference to other sectionsFor personal protection, see Section 7: Handling and storage, including how the chemical may be safely usedPrecautions for safe handlingUsage precautionsRead and follow manufacturer's recommendations. Wear protective clothing as described inSection 8 of this SAFETY data SHEET . Keep away from food, drink and animal feeding all packages and containers carefully to minimise spills. Keep container tightly sealedwhen not in use. Avoid the formation of on generaloccupational hygieneWash promptly if skin becomes contaminated.