SAFETY DATA SHEET - stepan.com

1 SAFETY data SHEET1. IdentificationSTEPANPOL PC-101P-55 Product identifierOther means of identification8000 Product codePolyester PolyolRecommended useFor industrial use restrictionsManufacturer/Importer/Suppli er/Distributor informationManufacturerStepan CompanyAddress22 West Frontage RoadCompany nameTelephoneGeneral1-847-446-7500 Emergency phone numberMedical1-800-228-5635 Chemtrec1-800-424-9300 Chemtrec Int'l +1 703-527-3887E-mailUSANot , IL 600932. Hazard(s) identificationNot hazardsNot hazardsNot hazardsNot defined hazardsLabel symbolSignal statementThe mixture does not meet the criteria for statementPreventionObserve good industrial hygiene hands after away from incompatible of waste and residues in accordance with local authority (s) not otherwiseclassified (HNOC)

2 None Composition/information on ingredientsMixturesCAS number%Chemical nameCommon name and synonyms< components below reportable levelsProprietary*Polyester Resin*90 - 100*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade First-aid measuresMove to fresh air. Call a physician if symptoms develop or off with soap and water. Get medical attention if irritation develops and contactRinse with water. Get medical attention if irritation develops and contactRinse mouth.

3 Get medical attention if symptoms / 6 Material name: STEPANPOL PC-101P-55 Material ID: 8558 Product code: 8000 Version #: 05 Revision date: 01-07-2019 Print date: 01-07-2019 SDS USDirect contact with eyes may cause temporary importantsymptoms/effects, acute anddelayedTreat of immediatemedical attention and specialtreatment neededEnsure that medical personnel are aware of the material(s) involved, and take precautions toprotect information5. Fire-fighting measuresWater fog. Foam. Dry chemical powder. Carbon dioxide (CO2).

4 Suitable extinguishing mediaDo not use water jet as an extinguisher, as this will spread the extinguishingmediaDuring fire, gases hazardous to health may be hazards arising fromthe chemicalSelf-contained breathing apparatus and full protective clothing must be worn in case of protective equipmentand precautions for firefightersMove containers from fire area if you can do so without fightingequipment/instructionsUse standard firefighting procedures and consider the hazards of other involved methodsNo unusual fire or explosion hazards fire hazards6.

5 Accidental release measuresKeep unnecessary personnel precautions,protective equipment andemergency proceduresWhere possible allow molten material to solidify Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this ispossible. Cover with plastic SHEET to prevent spreading. Absorb in vermiculite, dry sand or earthand place into containers. Following product recovery, flush area with Spills: Wipe up with absorbent material ( cloth, fleece). Clean surface thoroughly toremove residual return spills to original containers for and materials forcontainment and cleaning upAvoid discharge into drains, water courses or onto the precautions7.

6 Handling and storageAvoid prolonged exposure. Observe good industrial hygiene for safe handlingStore in original tightly closed for safe storage,including any incompatibilities8. Exposure controls/personal protectionNo biological exposure limits noted for the ingredient(s).Biological limit valuesGood general ventilation (typically 10 air changes per hour) should be used. Ventilation ratesshould be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,or other engineering controls to maintain airborne levels below recommended exposure limits.

7 Ifexposure limits have not been established, maintain airborne levels to an acceptable engineeringcontrolsIndividual protection measures, such as personal protective equipmentWear SAFETY glasses with side shields (or goggles).Eye/face protectionSkin protectionWear appropriate chemical resistant gloves. Suitable gloves can be recommended by the protectionWear suitable protective case of insufficient ventilation, wear suitable respiratory protectionWear appropriate thermal protective clothing, when hazardsAlways observe good personal hygiene measures, such as washing after handling the materialand before eating, drinking, and/or smoking.

8 Routinely wash work clothing and protectiveequipment to remove hygieneconsiderations2 / 6 Material name: STEPANPOL PC-101P-55 Material ID: 8558 Product code: 8000 Version #: 05 Revision date: 01-07-2019 Print date: 01-07-2019 SDS US9. Physical and chemical propertiesWaxy stateNot thresholdNot point/freezing point104 - 122 F (40 - 50 C)Initial boiling point and boilingrange< 446 F (< 230 C)Flash F ( C) Cleveland Closed CupEvaporation rateNot (solid, gas)Upper/lower flammability or explosive limitsFlammability limit - lower(%)Not limit - upper(%)Not limit - lower (%)Not limit - upper (%)Not pressureNot densityNot densityNot (ies)Solubility (water)

9 PartiallyAuto-ignition temperatureNot temperatureNot - 1350 mPa s @ 60 COther informationSpecific Stability and reactivityThe product is stable and non-reactive under normal conditions of use, storage and is stable under normal stabilityNo dangerous reaction known under conditions of normal of hazardousreactionsContact with incompatible to avoidStrong oxidizing materialsNo hazardous decomposition products are decompositionproducts11. Toxicological informationInformation on likely routes of exposureInhalationProlonged inhalation may be contactNo adverse effects due to skin contact are contactDirect contact with eyes may cause temporary to be a low ingestion related to thephysical, chemical andtoxicological characteristicsDirect contact with eyes may cause temporary on toxicological effects3 / 6 Material name: STEPANPOL PC-101P-55 Material ID: 8558 Product code: 8000 Version #: 05 Revision date: 01-07-2019 Print date.

10 01-07-2019 SDS USAcute toxicityTest ResultsProductSpeciesSTEPANPOL PC-101P-55 OralAcuteLD50 Rat> 2000 mg/kgProlonged skin contact may cause temporary corrosion/irritationDirect contact with eyes may cause temporary eye damage/eyeirritationRespiratory or skin sensitizationRespiratory sensitizationNot a respiratory product is not expected to cause skin sensitizationNo data available to indicate product or any components present at greater than aremutagenic or cell mutagenicityCarcinogenicityThis product is not considered to be a carcinogen by IARC, ACGIH, NTP, or Monographs.