SAFETY DATA SHEET - Stepan Company

1 SAFETY data SHEET1. IdentificationNINOL COMF-NProduct identifierOther means of identification6887 Product codeSurfactantRecommended useFor industrial use restrictionsManufacturer/Importer/Suppli er/Distributor informationManufacturerStepan CompanyAddress22 West Frontage RoadCompany nameTelephoneGeneral1-847-446-7500 Emergency phone numberMedical1-800-228-5635 Chemtrec1-800-424-9300 Chemtrec Int'l +1 703-527-3887E-mailUSANot , IL 600932. Hazard(s) identificationNot hazardsCategory 2 Skin corrosion/irritationHealth hazardsCategory 1 Serious eye damage/eye irritationCategory 2 Hazardous to the aquatic environment, acutehazardEnvironmental hazardsCategory 2 Hazardous to the aquatic environment,long-term hazardCombustible dustOSHA defined hazardsLabel elementsSignal wordDangerHazard statementCauses skin irritation.

2 Causes serious eye damage. Toxic to aquatic life with long lasting form combustible dust concentrations in statementPreventionKeep container tightly closed. Prevent dust accumulation to minimize explosion hazard. Keepaway from heat/sparks/open flames/hot surfaces. - No smoking. Ground/bond container andreceiving equipment. Wear eye/face protection. Avoid breathing dust/fume. Wash thoroughly afterhandling. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wearprotective on skin: Wash with plenty of water. If inhaled: Remove person to fresh air and keep comfortablefor breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses,if present and easy to do.

3 Continue rinsing. Call a POISON CENTER/doctor if you feel call a poison center/doctor. Specific treatment (see this label). If skin irritation occurs:Get medical advice/attention. Take off contaminated clothing and wash before reuse. away from incompatible of contents/container in accordance with local/regional/national/international (s) not otherwiseclassified (HNOC)None / 8 material name: NINOL COMF-NMaterial ID: 7619 Product code: 6887 Version #: 08 Revision date: 07-02-2018 Print date: 07-02-2018 SDS USSupplemental informationNot Composition/information on ingredientsMixturesCAS number%Chemical nameCommon name and synonyms68140-00-1 Coconut oil monoethanolamide80 - 100% components below reportable levels56-81-5 Glycerin0 - 20%4.

4 First-aid measuresRemove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen orartificial respiration if needed. Do not use mouth-to-mouth method if victim inhaled the artificial respiration with the aid of a pocket mask equipped with a one-way valve or otherproper respiratory medical device. Call a POISON CENTER or doctor/physician if you feel with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Take offcontaminated clothing and wash before contactDo not rub eyes. Immediately flush eyes with plenty of water for at least 15 minutes. Removecontact lenses, if present and easy to do. Continue rinsing. Get medical attention contactRinse mouth.

5 Get medical attention if symptoms may irritate the respiratory tract, skin and eyes. Symptoms may include stinging, tearing,redness, swelling, and blurred vision. Permanent eye damage including blindness could irritation. May cause redness and importantsymptoms/effects, acute anddelayedProvide general supportive measures and treat symptomatically. In case of shortness of breath,give oxygen. Keep victim warm. Keep victim under observation. Symptoms may be of immediatemedical attention and specialtreatment neededIn the case of accident or if you feel unwell, seek medical advice immediately (show the labelwhere possible). Ensure that medical personnel are aware of the material (s) involved, and takeprecautions to protect information5.

6 Fire-fighting measuresWater spray. Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Apply extinguishingmedia carefully to avoid creating airborne extinguishing mediaNone extinguishingmediaExplosion hazard: Avoid generating dust; fine dust dispersed in air in sufficient concentrations andin the presence of an ignition source is a potential dust explosion hazard. During fire, gaseshazardous to health may be hazards arising fromthe chemicalSelf-contained breathing apparatus and full protective clothing must be worn in case of protective equipmentand precautions for firefightersIn case of fire and/or explosion do not breathe fumes. In the event of fire, cool tanks with waterspray.

7 Move containers from fire area if you can do so without fightingequipment/instructionsCool containers exposed to flames with water until well after the fire is methodsMay form combustible dust concentrations in fire hazards6. Accidental release measuresKeep unnecessary personnel away. Keep people away from and upwind of spill/leak. Dustdeposits should not be allowed to accumulate on surfaces, as these may form an explosivemixture if they are released into the atmosphere in sufficient concentration. Use only non-sparkingtools. Wear appropriate protective equipment and clothing during clean-up. Do not touch damagedcontainers or spilled material unless wearing appropriate protective clothing.

8 Avoid inhalation ofdust. Ventilate closed spaces before entering them. Local authorities should be advised ifsignificant spillages cannot be precautions,protective equipment andemergency proceduresEliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Takeprecautionary measures against static discharge. Use only non-sparking Spills: Stop the flow of material , if this is without risk. Collect spillage. Avoid dispersal of dustin the air ( , clearing dust surfaces with compressed air). Large Spills: Wet down with water anddike for later disposal. Prevent product from entering drains. Following product recovery, flush areawith and materials forcontainment and cleaning upAvoid release to the environment.

9 Contact local authorities in case of spillage to drain/aquaticenvironment. Prevent further leakage or spillage if safe to do so. Do not contaminate water. Avoiddischarge into drains, water courses or onto the precautions2 / 8 material name: NINOL COMF-NMaterial ID: 7619 Product code: 6887 Version #: 08 Revision date: 07-02-2018 Print date: 07-02-2018 SDS US7. Handling and storageEliminate all sources of ignition. Minimize dust generation and accumulation. Combustible dustclouds may be created where operations produce fine material (dust). Avoid significant deposits ofmaterial, especially on horizontal surfaces, which may become airborne and form combustible dustclouds and may contribute to secondary explosions.

10 Handling and processing operations shouldbe conducted in accordance with best practices ( NFPA-654). Do not get this material incontact with eyes. Do not get this material in contact with skin. Avoid breathing dust. Avoidprolonged exposure. Avoid contact with clothing. Use only outdoors or in a well-ventilated appropriate personal protective equipment. Observe good industrial hygiene practices. Avoidrelease to the environment. Do not empty into for safe handlingKeep away from heat, sparks and open flame. Dry powders can build static electricity chargeswhen subjected to the friction of transfer and mixing operations. Provide adequate precautions,such as electrical grounding and bonding, or inert atmospheres.