SAFETY DATA SHEET - Stepan Company

1 SAFETY data SHEET1. IdentificationAMPHOSOL 2 CSFP roduct identifierOther means of identification0857 Product codeSurfactantRecommended useFor industrial use restrictionsManufacturer/Importer/Suppli er/Distributor informationManufacturerStepan CompanyAddress22 West Frontage RoadCompany nameTelephoneGeneral1-847-446-7500 Emergency phone numberMedical1-800-228-5635 Chemtrec1-800-424-9300 Chemtrec Int'l +1 703-527-3887E-mailUSANot , IL 600932. Hazard(s) identificationCategory 4 Flammable liquidsPhysical hazardsCategory 2 BSerious eye damage/eye irritationHealth hazardsCategory 1 BReproductive toxicityCategory 1 Specific target organ toxicity, single exposureCategory 1 Hazardous to the aquatic environment, acutehazardEnvironmental hazardsNot defined hazardsLabel elementsSignal wordDangerHazard statementCombustible liquid.

2 Causes eye irritation. May damage fertility or the unborn child. May causedamage to organs. Very toxic to aquatic statementPreventionObtain special instructions before use. Do not handle until all SAFETY precautions have been readand understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do notbreathe mist or vapor. Wash thoroughly after handling. Do not eat, drink or smoke when using thisproduct. Avoid release to the environment. Wear protective gloves/protective clothing/eyeprotection/face in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present andeasy to do. Continue rinsing. Immediately call a poison center/doctor. In case of fire: Useappropriate media to extinguish. Collect in a well-ventilated place. Keep cool. Store locked of contents/container in accordance with local/regional/national/international (s) not otherwiseclassified (HNOC)None informationNot Composition/information on ingredientsMixtures1 / 8 Material name: AMPHOSOL 2 CSFM aterial ID: 6275 Product code: 0857 Version #: 04 Revision date: 06-05-2018 Print date: 06-05-2018 SDS USCAS number%Chemical nameCommon name and synonyms7732-18-5 Water54 - 5868604-71-7_Disodium cocoamphodipropionate38 - 4067-56-1 Methanol3 - 661791-38-6_Cocoyl hydroxyethyl imidazoline1 - < 34.

3 First-aid measuresMove to fresh air. Call a physician if symptoms develop or off with soap and water. Get medical attention if irritation develops and contactImmediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, ifpresent and easy to do. Continue rinsing. Get medical attention contactRinse mouth. Get medical attention if symptoms may include stinging, tearing, redness, swelling, and blurred vision. Permanent eyedamage including blindness could importantsymptoms/effects, acute anddelayedProvide general supportive measures and treat symptomatically. Keep victim under may be of immediatemedical attention and specialtreatment neededIF exposed or concerned: Get medical advice/attention. Ensure that medical personnel are awareof the material(s) involved, and take precautions to protect information5.

4 Fire-fighting measuresWater fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Suitable extinguishing mediaDo not use water jet as an extinguisher, as this will spread the extinguishingmediaThe product is combustible, and heating may generate vapors which may form explosive vapor/airmixtures. During fire, gases hazardous to health may be hazards arising fromthe chemicalSelf-contained breathing apparatus and full protective clothing must be worn in case of protective equipmentand precautions for firefightersIn case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can doso without fightingequipment/instructionsUse standard firefighting procedures and consider the hazards of other involved methodsCombustible fire hazards6. Accidental release measuresKeep unnecessary personnel away.

5 Keep people away from and upwind of spill/leak. Eliminate allignition sources (no smoking, flares, sparks, or flames in immediate area). Wear appropriateprotective equipment and clothing during clean-up. Do not breathe mist or vapor. Do not touchdamaged containers or spilled material unless wearing appropriate protective clothing. Ensureadequate ventilation. Local authorities should be advised if significant spillages cannot precautions,protective equipment andemergency proceduresEliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keepcombustibles (wood, paper, oil, etc.) away from spilled Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this ispossible. Cover with plastic SHEET to prevent spreading. Use a non-combustible material likevermiculite, sand or earth to soak up the product and place into a container for later product from entering drains.

6 Following product recovery, flush area with Spills: Wipe up with absorbent material ( cloth, fleece). Clean surface thoroughly toremove residual return spills to original containers for and materials forcontainment and cleaning upAvoid release to the environment. Contact local authorities in case of spillage to drain/aquaticenvironment. Prevent further leakage or spillage if safe to do so. Do not contaminate water. Avoiddischarge into drains, water courses or onto the precautions2 / 8 Material name: AMPHOSOL 2 CSFM aterial ID: 6275 Product code: 0857 Version #: 04 Revision date: 06-05-2018 Print date: 06-05-2018 SDS US7. Handling and storageObtain special instructions before use. Do not handle until all SAFETY precautions have been readand understood. Keep away from open flames, hot surfaces and sources of ignition.

7 Do notbreathe mist or vapor. Do not get this material in contact with eyes. Avoid contact duringpregnancy/while nursing. Avoid prolonged exposure. Provide adequate ventilation. Wearappropriate personal protective equipment. Observe good industrial hygiene practices. Whenusing, do not eat, drink or smoke. Wash hands thoroughly after handling. Avoid release to theenvironment. Do not empty into for safe handlingStore locked up. Keep away from heat, sparks and open flame. Store in original tightly closedcontainer. Store in a cool, dry place out of direct sunlight. Store in a well-ventilated place. Keep inan area equipped with for safe storage,including any incompatibilities8. Exposure controls/personal protectionOccupational exposure limitsUS. OSHA Table Z-1 Limits for Air Contaminants (29 CFR )ValueComponentsTypePEL260 mg/m3 Methanol (CAS 67-56-1)200 ppmUS.

8 ACGIH Threshold Limit ValuesValueComponentsTypeSTEL250 ppmMethanol (CAS 67-56-1)TWA200 ppmUS. NIOSH: Pocket Guide to Chemical HazardsValueComponentsTypeSTEL325 mg/m3 Methanol (CAS 67-56-1)250 ppmTWA260 mg/m3200 ppmBiological limit valuesACGIH Biological Exposure IndicesValueComponentsDeterminantSpecime nSampling Time15 mg/lMethanolUrine*Methanol (CAS 67-56-1)* - For sampling details, please see the source guidelinesUS - California OELs: Skin designationMethanol (CAS 67-56-1)Can be absorbed through the - Minnesota Haz Subs: Skin designation appliesMethanol (CAS 67-56-1)Skin designation - Tennessee OELs: Skin designationMethanol (CAS 67-56-1)Can be absorbed through the ACGIH Threshold Limit Values: Skin designationMethanol (CAS 67-56-1)Can be absorbed through the NIOSH Pocket Guide to Chemical Hazards.

9 Skin designationMethanol (CAS 67-56-1)Can be absorbed through the general ventilation (typically 10 air changes per hour) should be used. Ventilation ratesshould be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,or other engineering controls to maintain airborne levels below recommended exposure limits. Ifexposure limits have not been established, maintain airborne levels to an acceptable level. Provideeyewash engineeringcontrolsIndividual protection measures, such as personal protective equipmentWear SAFETY glasses with side shields (or goggles) and a face protectionSkin protectionWear protective protectionWear appropriate chemical resistant / 8 Material name: AMPHOSOL 2 CSFM aterial ID: 6275 Product code: 0857 Version #: 04 Revision date: 06-05-2018 Print date: 06-05-2018 SDS USIn case of insufficient ventilation, wear suitable respiratory equipment.

10 If engineering controls donot maintain airborne concentrations below recommended exposure limits (where applicable) or toan acceptable level (in countries where exposure limits have not been established), an approvedrespirator must be protectionWear appropriate thermal protective clothing, when hazardsWhen using, do not eat, drink or smoke. Always observe good personal hygiene measures, suchas washing after handling the material and before eating, drinking, and/or smoking. Routinelywash work clothing and protective equipment to remove hygieneconsiderations9. Physical and chemical thresholdNot - 10 (as is)Melting point/freezing F (-7 C)Initial boiling point and boilingrange194 F (90 C)Flash - Pensky-Martens Closed CupEvaporation rate> 1 Butyl acetate = 1 Not (solid, gas)Upper/lower flammability or explosive limitsExplosive limit - lower (%)Not limit - upper (%)Not pressure25 mm HgVapor density> 1 Air = 1 Relative densityNot (ies)Solubility (water)Not temperatureNot temperatureNot lb/gal @ 25C10.