Safety Stations with Eyewash

1 Safety Stations with EyewashGuardian Equipment 312 447 8100 TELEPHONE 1140 N North Branch St 312 447 8101 FACSIMILE Chicago, IL 60642 8116. Units have been tested to and comply with ANSI and the Uniform Plumbing Code. FG1991 Safety station with Eyewash , All-Stainless Steel ConstructionApplication: All-stainless steel combination Eyewash and shower Safety station . Stainless steel construction is ideal for highly corrosive environments and cleanroom applications. Eyewash features two GS-Plus spray-type outlet heads that deliver a flood of water for rinsing Head: 10" diameter stainless steel with 20 GPM flow Valve: 1" IPS Type 316 stainless steel stay-open ball valve.

2 Valve has stainless steel ball and PTFE seals. Furnished with stainless steel actuating arm and 29" stainless steel pull Head Assembly: Two GS-Plus spray heads. Each head has a flip top dust cover, internal flow control and filter to remove impurities from water Bowl: 11-1/8" diameter stainless Valve: 1/2" IPS Type 316 stainless steel stay-open ball valve. Valve has stainless steel ball and PTFE and Fittings: Schedule 40 Type 304 brushed stainless steel. Furnished with orange polyethylene pipe covers for high visibility and corrosion : 1-1/4" NPT female top or side : 1-1/4 NPT female outlet.

3 Outlet can be positioned at either 8-1/4 or 19-3/8 above finished floor by reversing lower pipe : ANSI-compliant identification Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment. Available Options FBC Stainless steel cover for Eyewash bowl. F AP275-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when Eyewash or shower is activated. Furnished complete with flow switch and mounting hardware. FAP250-015 Modesty curtain for mounting on Safety station . FG3800LF Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Refer to Tempering Valves section for complete technical and product selection SPACE FOR ARCHITECT/ENGINEER APPROVALDue to continuing product improvement, the information contained in this document is subject to change without notice.

4 All dimensions are 1/4" (6mm). Safety Stations with EyewashGuardian Equipment 312 447 8100 TELEPHONE 1140 N North Branch St 312 447 8101 FACSIMILE Chicago, IL 60642 8116. Units have been tested to and comply with ANSI and the Uniform Plumbing Included FG1991 Safety station with Eyewash , All-Stainless Steel Constructionrev. 05141824"(610mm) 10"(254mm)5 3/4"(146mm)23 5/8"(600mm)5 3/4"(146mm)90"(2286mm)84 1/4"(2140mm)6 1/2"(165mm) 5"(127mm)8 1/4"(210mm)9 1/4"(235mm)36"(914mm) 11 1/8"(283mm)65"(1651mm)4 1/2"(114mm)5 1/4"(133mm)29"(737mm)STAINLESS STEELACTUATING ARM1" IPS STAINLESS STEELSTAY-OPEN BALL VALVE1 1/4" NPTFEMALE INLETSTAINLESS STEEL SHOWERHEAD with 20 GPMFLOW CONTROL1 1/4" NPTFEMALE INLET(PLUGGED)1/2" IPS STAINLESSSTEEL STAY-OPENBALL VALVE1 1/4" NPTFEMALE OUTLETSTAINLESS STEELPIPE AND FITTINGSSTAINLESS STEELPULL ROD(2)

5 GS-PLUS SPRAY HEADSSTAINLESSSTEEL BOWLSTAINLESS STEELFLAG HANDLESTAINLESS STEELFLOOR FLANGE(SEE DETAIL "A")TEE CLOSEDONE GS-PLUS SPRAY HEAD HAS A "FLIP-TOP" DUST COVER, INTERNAL FLOW CONTROL AND FILTER TO REMOVE IMPURITIES FROM THE WATER THE TWO LOWEST PIPE NIPPLES RAISES THE DRAIN OUTLET TO 19-3/8" (4) 5/8" MOUNTING HOLES ON 3-1/2" BOLT CIRCLEDETAIL "A"FLOOR FLANGErev. 013119