Safety Stations with Eyewash

1 Safety Stations with EyewashGuardian Equipment 312 447 8100 TELEPHONE 1140 N North Branch St 312 447 8101 FACSIMILE Chicago, IL 60642 8116. Units have been tested to and comply with ANSI and the Uniform Plumbing Code. FG1950 PCC Safety station with Eye/Face Wash, Polished Chrome ConstructionApplication: Combination eye/face wash and shower Safety station . Unit is constructed of polished chrome plated brass pipe, fittings and components for attractive appearance and superior durability. Eye/face wash features two largeFS-Plus spray-type outlet heads that deliver a flood of water for rinsing eyes and Head: 10 diameter stainless steel with 20 GPM flow Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals. Furnished with stainless steel actuating arm and 29" stainless steel pull Head Assembly: Two FS-Plus spray heads.

2 Each head has a flip top dust cover, internal flow control and filter to remove impurities from water Wash Bowl: 11-1/8" diameter stainless Wash Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE and Fittings: Polished chrome plated : 1-1/4" NPT female top : 1-1/4" NPT female outlet. Outlet can be positioned at either 8-1/4" or 20-1/4" above finished floor by reversing lower pipe : ANSI-compliant identification Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment. Available Options F AP275-200 Electric flashing light and alarm horn unit for mounting on wall or vertical pipe. Light illuminates and horn sounds when eye/face wash or shower is activated. Furnished complete with flow switch and mounting hardware.

3 FAP250-015 Modesty curtain for mounting on Safety station . F G3800LF Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Refer to Tempering Valves section for complete technical and product selection SPACE FOR ARCHITECT/ENGINEER APPROVALDue to continuing product improvement, the information contained in this document is subject to change without notice. All dimensions are 1/4" (6mm). Safety Stations with EyewashGuardian Equipment 312 447 8100 TELEPHONE 1140 N North Branch St 312 447 8101 FACSIMILE Chicago, IL 60642 8116. Units have been tested to and comply with ANSI and the Uniform Plumbing Included FG1950 PCC Safety station with Eye/Face Wash, Polished Chrome ConstructionDETAIL "A"UNIVERSAL FLOOR FLANGEON 7-5/8" BOLT CIRCLE 7/16" MOUNTING SLOTS8 1/4"(210mm)37 1/2"(953mm)9 5/8"(245mm) 11 1/8"(283mm)89"(2261mm)29"(737mm)6"(152mm ) 10"(254mm)24"(610mm)23 5/8"(600mm)5 3/4"(146mm)6 1/2"(165mm)4 7/8"(124mm)5 1/2"(140mm)83"(2108mm) 9"(229mm)1 1/4" NPTFEMALE OUTLET1/2" IPS CHROMEPLATED BRASS STAY-OPEN BALL VALVEPOLISHED CHROMEPLATED BRASSPIPE AND FITTINGS1 1/4" NPTFEMALE INLET1" IPS CHROME PLATEDBRASS STAY-OPENBALL VALVESTAINLESS STEEL ACTUATING ARMSTAINLESS STEEL SHOWERHEAD with 20 GPMFLOW CONTROLSTAINLESS STEELPULL ROD(2)

4 FS-PLUS SPRAY HEADSPOWDER COATED CAST ALUMINUM FLAG HANDLEPOWDER COATEDCAST ALUMINUMFLOOR FLANGE(SEE DETAIL "A")STAINLESSSTEEL BOWLNOTE:1. EACH FS-PLUS SPRAY HEAD HAS A "FLIP-TOP" DUST COVER, INTERNAL FLOW CONTROL AND FILTER TO REMOVE IMPURITIES FROM THE WATER REVERSING THE TWO LOWEST PIPE NIPPLES RAISES THE DRAIN OUTLET TO 20-1/4" 0817