Transcription of SAUERESSIG CP 90-200
1 SAUERESSIG CP 90-200 rotogravure laboratory proofer flat-bed principle pneumatic driven (printing- and washingmotor) ex-protected version variable speed and print pressure incl. printing cylinder CP 90-200 -13 optional: further cylinders (fullprint etc.) SAUERESSIG CP 90-60 rotogravure laboratory proofer flat-bed principle easy manual printing and washing ex-protected version variable speed and print pressure incl. printing cylinder CP 90-60-13 optional: further cylinders (fullprint etc.)
2 Optional: mobile carriageTechnical Data CP 90-200 diameter print cylinder 90 mm width print cylinder 200 mm max. printing width 175 mm speed 10 50 m/min air pressure 6 8 bar table length 2 or 3 cylinder revolutionsTechnical Data CP 90-60 diameter print cylinder 90 mm width print cylinder 60 mm max. printing width 50 mm table length 2 or 3 cylinder revolutionsColor- proofer / laboratory machinesSAUERESSIG FP 100-300 Standard fl exo-laboratory- proofer , reel-to-reel pneumatic driven (printing- and washing-motor) integrated drying with heater or cold-air-nozzle incl.
3 Anilox roller: standard 8 bands incl. rubber coated steel cylinder variable speed and print pressure optional: ex-protected version optional: air mandrel for polymer- or rubber sleeves optional: anilox roller in ceramicsSAUERESSIG FP 100-300 UV fl exo-laboratory- proofer , reel-to-reel pneumatic driven (printing- and washingmotor) integrated drying with UV-curing-unit, heater or cold-air-nozzle incl. shutter, encapsulated step less UV-curing unit incl. anilox roller: standard 8 bands incl.
4 Rubber coated steel cylinder variable speed and print pressure optional: ex-protected version optional: air mandrel for polymer- or rubber sleeves optional: anilox roller in ceramicsTechnical Data FP 100-300 UV diameter print cylinder 100 mm width print cylinder 300 mm max. printing width 260 mm air mandrel (optional): 89,243 mm speed 10-50 m/min UV-power 150-200 W/cm air pressure 6-8 bar power/connection: 220V (standard) 380 V (UV version)Contact:Dirk Bertling, Pilot-lab/ Lab machinesPhone: +49 (0) 2564 12-684E-Mail: Olejak, Pilot-lab/ Lab machinesPhone: +49 (0) 2564 12-773 E-Mail: Flexo GmbH + Co.
5 KGFerat Sarac, Global Manager FlexoGutenbergstr. 1-348691 Vreden GermanyFax: +49 (0) 2564 12-465E-Mail: attempts on the following materials with really fantastic results thin fi lms between 20 40 microns thick fi lms papers of all kinds carton aluminum non-woven material composites incl. anilox roller: standard 8 band incl. air mandrel for polymer- or rubber sleeves variable speed and print pressure optional: ex-protected version optional: anilox roller in ceramicsSAUERESSIG FREE-1 Flexo Rotogravure Embossing Engine-1 High precision printing machine for fl exo, gravure printing and embossing on a stable profi le frame for printing of aqueous to pasty substances Laser-etched anilox rolls (ceramic, metallic, etc.)
6 From 1 100 cc / m available 2 printing units with air-cylinder sleeve technique, either fl exographic and / or rotogravure combination 3 5 electric motors for precise alignment control Pneumatic print pressure adjustment and counter- micrometer screws for extremely accurate printing on just 1 micron Extremely smooth and quiet operation Fully automated web tension control Infi nitely variable speed adjustment of 0 30 m / min Hot air drying with variable distance Touch-panel control Cabinet and electric control included Optional Corona treatment Optional UV
7 DryingTechnical Data FREE-1 diameter print cylinder 100 mm width print cylinder 300 mm max. printing width 260 mm air mandrel (optional): 89,243 mm speed 0 30 m/min air pressure 6 8 bar power/connection: 400 V 16 A
