Scanning with Simplicity - Saveo Scan

1 Scanning with of ContentsProduct I nf ormation3 Getting Started4 Operating Elements5 Connecting via USB OTG8 Connecting to iOS via Bluetooth9 Connecting to Android via Bluetooth12 Unpairing your device15 Operating Modes16 Reset to Defaults18 LED Indicator18 Batt ery Level Sta tus19 Power Saving Mode19 Further Inf ormation203 Delivery contents* Saveo -SCAN-M22D-BH scanner x 1 * Charging Cradle x 1* Micro USB cable x 1* Quick instructions x 1 Limited WarrantySaveo Scan provides a one year limited warranty. This warranty does not cover any product which has been subject to improper use, neglect or unauthorized repair or warranty does not cover consumable parts. (Cables & batteries are consumables.)

2 Safety instructionsRead the operating instructions carefully and pay special attention to the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property.* Don t put scanner in places of excessively high temperature, such as exposure to direct sunlight* Don t use scanner in extremely humid conditions or in conditions of extreme temperature change * The rechargeable battery is permanently built into the product and cannot be replaced. * Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause explosion or re!

3 Product Information4 Getting StartedPower SwitchPower switch is located on the underside of the the underside of the scanner you will nd a small recessed button. Use a pen or paper clip to push the button until you hear a noti cation sound. Ensure power switch remains depressed after you release on Saveo ScanSwitch on and Charge your ScannerPlease switch on your scanner (as illustrated) and place it in the cradle to charge for 3~4 hours before rst you want to charge smartphone and scanner simultaneous-ly, please switch scanner to Charge Mode before placing it in the *Please remove the protective sticker from window before useTrigger/Power On buttonWrist StrapUniversal HolderExit WindowOperating ElementsLED indicatorCharging CradleSwitch for Operation Mode and Charge Mode/Bluetooth ModeMicro USB CableUse Micro USB cable to connect to smartphone/tablet6 Extend retractable armPress button and slide outwards to extend the armAttaching your smartphone to scanner using the universal holderExtend the retractable arm before placing phone in holder and then pushing it rmly back against the phone in holderRetract the arm until phone is held rmly in placeInsert phone7

4 Connect phone to scanner with Micro USB cableAs USB connection locations vary on di erent models of smartphone, the cable can be con gured for your speci c via USB OTGS witch scanner to Operation Mode (Data transmis-sion via USB OTG)Switch to left: Operation Mode/ Data transmissionCon rm scanner is connectedSaveo Scan is detected by your smartphone as an external keyboard. A message will appear on screen to notify you that a USB device has been are now connected. Start the Wired OTG Communication barcodes below Demo %E%R%A9 Connecting to iOS via BluetoothEnable Bluetooth on your deviceGo to your phone s homescreen and nd Settings , then Bluetooth and turn Bluetooth scanner to Charge Mode/Bluetooth ModeScan the Wireless BT Communication barcodes below Demo %W%L%TWhen Bluetooth is enable, the LED will remain red until the scanner has been paired with a Bluetooth to right: Charge Mode/ Bluetooth Mode%E%R%A10 Search for devicesYour phone will automatically search for devices, Saveo Scan will appear as an external keyboard with a unique identi er number (R-xxxxxx).

5 Scan Bluetooth Pro le barcodesSelect R-xxxxxx to connectSelect scanner from Available Devices and wait for pairing process to you scan the Bluetooth pro le barcodes, your scanner will become visible to Bluetooth enabled devices within range. Demo %H%I%DHID Pro leA1A2 Demo %B%R%C11 Devices are now Connected is displayed, your device is paired to the scanner. Your scanner is now ready to note: devices only need to be paired once. When they are within Bluetooth range they will automatically attempt to connect to each other. If you wish to pair to another device it is recommended you rst unpair this are now connected.

6 Start to Android via BluetoothEnable Bluetooth on your deviceGo to your phone s homescreen and click on the menu button to nd Settings , then Bluetooth and switch bluetooth scanner to Charge Mode/Bluetooth ModeScan the Wireless BT Communication barcodes below Demo %W%L%TWhen Bluetooth is enable, the LED will remain red until the scanner has been paired with a Bluetooth device. Demo %E%R%ASwitch to right: Charge Mode/ Bluetooth Mode13 Scan Bluetooth Pro le barcodesAfter you scan the Bluetooth pro le barcodes, your scanner will become visible to Bluetooth enabled devices within range. Demo %H%I%DHID Pro leA1A2 Demo Search for devicesClick Search for Devices at the bottom of the screen and Saveo Scan will appear as an external keyboard with a unique identi er number (R-xxxxxx).

7 14 Select R-xxxxxx to connectSelect scanner from Available Devices and wait for pairing process to are now Connected is displayed, your device is paired to the scanner. Your scan- ner is now ready to note: devices only need to be paired once. When they are within Bluetooth range they will automatically attempt to connect to each other. If you wish to pair to another device it is recommended you rst unpair this are now connected. Start your deviceBefore connecting the scanner to another device it is recom-mended you rst unpair from the current using your phoneGo to the Bluetooth menu on your phone and select the option menu for scanner from list of paired devices.

8 Choose Forget this Device / Unpair 16 There are two operating modes on the scanner, Data trans-mission mode and Data Storage Mode. Scan the appropriate barcodes when switching between these two note: Switching between modes will wipe the scanner s internal memory. Operating ModesData Transmission Mode (Default)Our Default setting is Data Transmission mode. In this mode data will be sent to smartphone/tablet enter Data Transmission Mode please scan the follwing barcodes. Demo %E%R%A Demo %M%A%FEnter Data Transmission ModeGreen/Orange LED ashes followed by 3 Demo %E%R%AClean Memory DataGreen/Orange LED ashes followed by 3 beeps.

9 Demo %M%A%NData Storage ModeIn this mode, data will be saved directly to scanner s Transmit Memory Data to receive data stored on scanner s internal Data Storage ModeGreen/Orange LED ashes followed by 3 beeps. Demo %E%R%ATo enter Data Storage Mode please scan the follwing barcodes. Demo %R%E%CTransmit Memory DataGreen/Orange LED ashes followed by 3 Memory DataScan the following barcode to receive data stored in the scanner s internal data is transmitted to your device it remains on the scanner s internal memory. Scan the following barcode to clear the memory if you do not wish to send this data Con guration to Defaults (scan from A1to A2)HID Pro leA1A2 Demo Demo Reset to Defaults When the battery power is too low, the Orange LED will ash and beep once.

10 Scanner should be charged immediately. If scanner shuts down it is recommended to charge it fully then power it back on. Under power-saving mode, there will not be an LED indica-tion when charging. If you want to know the charge status, press the trigger and the LED will display LED ONFull chargedOrange LED (Flashing)Charging / Low batt eryRed LED ONO ine / Out of RangeGreen LED ONGood readOrange LED ONGood read (Batch mode)LED Indicator Inf ormationLED Indicator Demo Current Battery LevelScan to receive the current battery levelScan the following barcode to send battery level information to your device. The format is outlined in the table ^4^%80% - 100%%^3^%55% - 80%%^2^%30% - 55%%^1^%10% - 30% %^0^%under 10%Battery Level StatusPower saving mode is enabled by default and will put the scanner to sleep after 1 minute s inactivity.