Example: stock market

Screw Pin Anchor Shackle - Industrial Rigging

Screw PIN Anchor SHACKLES* G-209 / S-209 Capacities 1/3 through 55 metric tonnes, grade 6. Forged - Quenched and Tempered, with alloy pins. Working Load Limit and grade 6 permanently shown on every Shackle . Hot Dip galvanized or Self Colored. Fatigue rated. Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F). 2t through 25t bow and Screw pin are Certified to meet charpy impact testing of 42 joules(31 ft-lbs.) min. ave. at -20 degree C (-4 degree F). Meets or exceeds all requirements of ASME Crosby 2t through 25t G209 Anchor shackles are type approved to DNV Certification -Offshore Containers. These Crosby shackles are statistical proof and impact tests are conducted by Crosby and test certification is available upon request.

SCREW PIN ANCHOR SHACKLES * G-209 / S-209 • Capacities 1/3 through 55 metric tonnes, grade 6. • Forged - Quenched and Tempered, with alloy pins.

Tags:

  Screw, Anchor, Shackle, Screw pin anchor, Screw pin anchor shackles

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of Screw Pin Anchor Shackle - Industrial Rigging

1 Screw PIN Anchor SHACKLES* G-209 / S-209 Capacities 1/3 through 55 metric tonnes, grade 6. Forged - Quenched and Tempered, with alloy pins. Working Load Limit and grade 6 permanently shown on every Shackle . Hot Dip galvanized or Self Colored. Fatigue rated. Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F). 2t through 25t bow and Screw pin are Certified to meet charpy impact testing of 42 joules(31 ft-lbs.) min. ave. at -20 degree C (-4 degree F). Meets or exceeds all requirements of ASME Crosby 2t through 25t G209 Anchor shackles are type approved to DNV Certification -Offshore Containers. These Crosby shackles are statistical proof and impact tests are conducted by Crosby and test certification is available upon request.

2 Look for the Red Pin .. the mark of genuine Crosby READ APPLICATION AND WARNING INFORMATION REGARDING CROSBY SHACKLES TO ENSURE PROPER USE. Angle of Side Loadfrom Vertical In-Line of ShackleAdjusted Working Load Limit0 - 5 In-Line*100% of Rated Working Load Limit45 from In-Line*70% of Rated Working Load Limit90 from In-Line*50% of Rated Working Load Limit+ In-Line load is applied perpendicular to pin.* DO NOT SIDE LOAD ROUND PIN shackles larger than 125 metric tonnes, where the angle of the side load is greater than 5 degrees, contact Crosby : Maximum Proof Load is times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit. For Working Load Limit reduction due to side loading applications, see application and warning LOADED RATING REDUCTION TABLE FOR 3/16 - 3 (120 METRIC TONNES) IN-LINE45 DEGREES90 DEGREESN ominal Size(in.)

3 Working LoadLimit(t)* (lbs.)Dimensions(in.)Tolerance+ / -G-209S-209 ABCDEFGHLMPCA3/161/31018357 . 1 Side Loading Reduction Chartfor Screw Pin and Bolt Type Shackles Only Angle loads must be applied in plane of the Shackle Screw Pin Anchor ShackleIndustrial Rigging & Supply E-E-mail Website - Toll Free (866) 942-4774 Copyright 2013 The Crosby Group LLC All Rights Reserv


Related search queries