Example: dental hygienist

SDS Atlas Copco Chisel Paste - cakymsds.com

Atlas Copco Chisel Paste Version number 3 2007-07-12 Page 1 of 6 SAFETY DATA SHEET Atlas Copco Chisel Paste 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Codes 3315 0381 00 (400 g), 3362 2639 00 (15 kg), 3362 2632 75 (45 kg) InfoSafe-no ACO0A SE/swe/C Date of preparation 2007-07-09 Product type / application Lubricant Supplier Telephone number +46 (0)8-743 96 00 Fax number +46 (0)8-743 96 50 Emergency Phone Number Swedish Poison Centre 112 (acute) Atlas Copco Construction Tools AB SE-105 23 Stockholm Sweden Homepage: +46 (0)8-33 12 31 (non-acute) Person responsible for data sheet Olof Gustafsson 2. HAZARDS IDENTIFICATION EU-classification None. Health risk Product is not classified as hazardous to health. Physical risk No physical risks when handled under normal circumstances. Environmental risk Not classified as hazardous to the environment. 3. COMPOSITION/INFORMATION ON INGREDIENTS Description of preparation Mixture of oils and additives.

Atlas Copco Chisel Paste Version number 3 2007-07-12 Page 1 of 6 SAFETY DATA SHEET Atlas Copco Chisel Paste 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Tags:

  Taal, Septa, Copco, Chisels, Atlas copco chisel paste

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Advertisement

Transcription of SDS Atlas Copco Chisel Paste - cakymsds.com

1 Atlas Copco Chisel Paste Version number 3 2007-07-12 Page 1 of 6 SAFETY DATA SHEET Atlas Copco Chisel Paste 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Codes 3315 0381 00 (400 g), 3362 2639 00 (15 kg), 3362 2632 75 (45 kg) InfoSafe-no ACO0A SE/swe/C Date of preparation 2007-07-09 Product type / application Lubricant Supplier Telephone number +46 (0)8-743 96 00 Fax number +46 (0)8-743 96 50 Emergency Phone Number Swedish Poison Centre 112 (acute) Atlas Copco Construction Tools AB SE-105 23 Stockholm Sweden Homepage: +46 (0)8-33 12 31 (non-acute) Person responsible for data sheet Olof Gustafsson 2. HAZARDS IDENTIFICATION EU-classification None. Health risk Product is not classified as hazardous to health. Physical risk No physical risks when handled under normal circumstances. Environmental risk Not classified as hazardous to the environment. 3. COMPOSITION/INFORMATION ON INGREDIENTS Description of preparation Mixture of oils and additives.

2 Hazardous component(s) Name CAS-number EINECS Concentration Symbols Risk phrases Residual oils (petroleum), solvent-refined ** 64742-01-4 265-101-6 70-80 % Xn R65 Lubricating oils (petroleum), C20-50, hydrotreated neutral oil-based, high-viscosity ** 72623-85-9 276-736-3 5-10 % Xn R65 Activated carbon 7440-44-0 231-153-3 5-10 % F, Xi R17-36/37 Other information For a full description of R-phrases see Section 16. ** Contains < 3% DMSO. Chisel Paste Version number 3 2007-07-12 Page 2 of 6 4. FIRST-AID MEASURES Symptoms and effects None expected. Inhalation Remove patient to fresh air, allow to rest and keep warm. If specific symptoms are evident, seek medical attention. Skin Wash immediately with plenty of soap and water. Eyes Flush immediately with plenty of water for several minutes, keeping eyelids open. If irritation develops seek medical advice. Ingestion DO NOT induce vomiting! Rinse mouth out with water, and give 1 to 2 glasses of water to drink. Seek medical attention if any symptoms occur.

3 Advice to doctors Treat according to symptoms. Other information Ensure that those giving first aid treatment do not get contaminated by product spills, etc. Wear suitable protective clothing, gloves, and safety goggles. See also Section 8. 5. FIRE-FIGHTING MEASURES Special exposure hazards In case of fire or excessive heat carbon monoxide and other hazardous gases may be evolved. Suitable extinguishing media Dry powder or carbon dioxide (CO2). Foam and water mist/fog may be used. Extinguishing media not to be used Do not use water jet. Special protective equipment for fire fighters None. 6. ACCIDENTAL RELEASE MEASURES Personal precautions None other than those for normal use. See Section 8. Environmental precautions Prevent from entering sewers or the immediate environment. In case of large spill, inform local police and/or fire brigade. Methods for cleaning up - small spills Contain spills with sand, earth or similar materials. Absorb onto inert material such as sand, sawdust or vermiculite.

4 Place in a closed container and dispose of as hazardous waste. See Section 13. Methods for cleaning up - larger spills As above. 7. HANDLING AND STORAGE Handling Do not eat or drink whilst handling. Avoid skin and eye contact. Atlas Copco Chisel Paste Version number 3 2007-07-12 Page 3 of 6 Storage Store at room temperature in a dry and well ventilated place. Keep out of reach of children. Storage temperature 0 C minimum. 50 C maximum. Other information None. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters None set Recommended engineering controls Ensure good ventilation during use. Arrange for eye wash possibility. Respiratory protection No protection recommended other than good ventilation. Hand protection Natural rubber gloves. However, since glove performance is governed by many variables it is strongly recommended that specialist advice on the selection and use of protective gloves is sought. Note: Break-through times can vary depending on thickness, use and source.

5 Change gloves regularly. Eye protection Where there is a risk of splashing wear chemical goggles or full face visor. Do not wear contact lenses. Skin protection Laboratory coat or overalls. Discharge to the environment Avoid discharge to the environment. 9. PHYSICAL AND CHEMICAL PROPERTIES Colour Copper coloured. Physical sate Paste . Odour Mineral oil. Solubility in water Insoluble. Density 900 kg/m3 at 20 C. Flash point Not measured. Kinematic viscosity 22 mm2/s at 40 C. Softening point 260 C. (DIN/ISO 2176). 10. STABILITY AND REACTIVITY Stability Stable under normal conditions. Conditions to avoid Extreme heat, flames or other sources of ignition such as electrostatic discharges. Materials to avoid Strong acids and bases. Hazardous decomposition products In case of fire or excessive heat carbon monoxide and other hazardous gases may be evolved. Chisel Paste Version number 3 2007-07-12 Page 4 of 6 11. TOXICOLOGICAL INFORMATION Basis of assessment No specific toxicological data for the product.

6 Information is based on data for ingredients or similar products. Acute toxicity oral LD50 rat >10 000 mg/kg bodyweight (not harmful). Acute toxicity skin No data available. Acute toxicity inhalation LC50 rat (4hr) >64,4 mg/l (Activated Carbon, not harmful). Eye irritation May have slight, transient irritating effect to eyes. Skin irritation Has defatting effect on the skin. May produce slight irritation on repeated contact. Irritation to respiratory system None known. Ingestion Ingestion can induce vomiting with a risk of aspiration into the lungs, leading to chemical inflammation of the lung. Allergic skin reaction Not expected to produce allergic reactions as none of the ingredients have that property. Carcinogenicity None known. Mutagenicity None known. Reproductive toxicity None known. 12. ECOLOGICAL INFORMATION Basis of assessment No specific ecotoxicological data for the product. Information is based on data for ingredients or similar products. Mobility Insoluble in water.

7 Persistence/degradability Poorly biodegradable. Bioaccumulation No data available. Ecotoxicity Based on ingredient data, not expected to be hazardous to the environment. Other effects Product has not been tested use care. 13. DISPOSAL CONSIDERATIONS Waste handling Disposal must be in accordance with relevant national and local legislation, via a licensed contractor. Atlas Copco Chisel Paste Version number 3 2007-07-12 Page 5 of 6 Disposal of product Product is considered Hazardous Waste. Disposal of packaging Empty, uncleaned packaging is considered Hazardous Waste. Waste classification If not mixed with other waste, European Waste Codes (EWC) 13 01 13*; other hydraulic oils and 12 01 07*; mineral-based machining oils free of halogens (except emulsions and solutions) may be applicable. 14. TRANSPORT INFORMATION Transport information Not classified as dangerous goods under ADR/RID, IMO or IATA/ICAO. ADR/RID risk class Not classified. ADR/RID packing group Not applicable. IMDG risk class Not classified.

8 IMDG packing group Not applicable. IATA/ICAO risk class Not classified. IATA/ICAO packing group Not applicable. 15. REGULATORY INFORMATION EU-symbol None. Indication of Danger None. Risk phrases None. Safety phrases None. EINECS-no All ingredients of this product are listed in EINECS or ELINCS or are specifically exempted as polymers. TSCA (USA) Not established. 16. OTHER INFORMATION Revision First issue in REACH format. Replaces Version 2 dated 2004-11-02. References 1907/2006/EC REACH Regulation 67/548/EEC - Dangerous Substances Directive. 1999/45/EC - Dangerous Preparations Directive. Chisel Paste Version number 3 2007-07-12 Page 6 of 6 91/155/EEC - Safety Data Sheet Directive. 98/24/EC - Protection of the Health and Safety of Workers from risks related to chemical agents at work. 89/686/EEC - Approximation of the laws of the member of states relating to personal protective equipment. 76/769/EEC - Restrictions of the marketing and use. Concawe Reports RTECS Suppliers data sheets.

9 R-phrase used in Section 3 R17 Spontaneously flammable in air. R36/37 Irritating to eyes and respiratory system. R65 Harmful: may cause lung damage if swallowed. Other information None. Prepared according to 1907/2006/EC.


Related search queries