SECTION 081216 - INTERIOR ALUMINUM FRAMES AND …

1 October 1, 2013 West Hall Addition Bid Issue Union County Vocational - Technical Schools Scotch Plains, New Jersey INTERIOR ALUMINUM DOORS AND FRAMES 081216 - 1 SECTION 081216 - INTERIOR ALUMINUM DOORS AND FRAMES PART 1 - GENERAL RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this SECTION . SUMMARY A. SECTION Includes: 1. Pre-finished ALUMINUM door FRAMES for INTERIOR use. 2.

2 Pre-finished ALUMINUM window FRAMES for INTERIOR use. 3. Pre-finished ALUMINUM framing systems for INTERIOR use. 4. Pre-finished ALUMINUM doors for INTERIOR use. B. Related Sections: 1. Division 08 SECTION "Glazing" for glass view panels in INTERIOR ALUMINUM doors. 2. Division 08 SECTION " ALUMINUM Entrances and Storefront" for glazed ALUMINUM doors and framing used in exterior walls and vestibule enclosures. 3. Division 08 Sections "Flush Wood Doors", "Clad Wood Doors , and "Stile and Rail Wood Doors" for wood doors used in INTERIOR ALUMINUM FRAMES .

3 4. Division 08 Sections "Door Hardware" for door hardware used on INTERIOR ALUMINUM doors and FRAMES . 5. Division 26 "Electrical" Sections for electrical connections including conduit and wiring for door controls and operators installed on INTERIOR ALUMINUM FRAMES . 6. Division 28 SECTION "Access Control" for access control devices installed at INTERIOR ALUMINUM frame openings and provided as part of a security access system. C. Codes and References: Comply with the version year adopted by the Authority Having Jurisdiction.

4 1. AAMA - Performance Requirements and Test Procedures for Pigmented Organic Coatings on Extruded ALUMINUM . 2. AAMA - Guide Specification and Inspection Methods for Clear Anodize Finishes for Architectural ALUMINUM . 3. AAMA - Guide Specification and Inspections Methods for Electrolytically Deposited Color Anodic Finished for Architectural ALUMINUM . 4. AAMA 609 & 610-02 - Cleaning and Maintenance Guide for Architecturally Finished ALUMINUM . 5. ASTM B221 - Standard specification for ALUMINUM and ALUMINUM -alloy extruded bars, rods, wire, profiles, and tubes.

5 6. NAAMM - "Metal Finishes Manual for Architectural and Metal Products'. 7. ANSI/NFPA 80 - Standard for Fire Doors and Fire Windows; National Fire Protection Association. 8. ANSI - Accessible and Usable Buildings and Facilities. 9. ICC/IBC - International Building Code. October 1, 2013 West Hall Addition Bid Issue Union County Vocational - Technical Schools Scotch Plains, New Jersey INTERIOR ALUMINUM DOORS AND FRAMES 081216 - 2 SUBMITTALS A. Product Data: For each type of product indicated.

6 Include construction details, material descriptions, hardware reinforcements, profiles, anchors, fire-resistance rating, and finishes. B. Templates: Door hardware supplier is to furnish templates, template reference number and/or physical hardware to the INTERIOR ALUMINUM door and frame supplier in order to prepare the doors and FRAMES to receive the finish hardware items. C. Shop Drawings: Include the following: 1. Frame details for each frame type, including dimensioned profiles and metal thicknesses.

7 2. Locations of reinforcement and preparations for hardware. 3. Details of each different wall opening condition. Include requirements for steel framing at partitions for fit and securing of FRAMES , partition widths and tolerances, direction of framing members, clips and attachments. 4. Details of anchorages, joints, field splices, and connections. 5. Details of accessories. 6. Details of moldings, removable stops, and glazing. 7. Elevations of each door design. 8. Details of doors, including vertical and horizontal edge details and metal thicknesses.

8 9. Details of preparations for power, signal, and control systems. D. Samples for Verification: Provide at the request of architect, prepared Samples as indicated below: 1. Framing Member: 12 inches long. 2. Corner Fabrication: 12-by-12-inch-long, full-size window corner, including full-size sections of extrusions with factory-applied color finish. 3. ALUMINUM chips in full range manufacturer s standard finishes for architect s color selection. E. INTERIOR ALUMINUM Door and Frame Schedule: Use same designations indicated on Drawings.

9 Coordinate with Door Hardware schedule and glazing. F. Informational Submittals 1. Certificates of Compliance: Submit any product test report or information necessary to indicate compliance with this specification SECTION . QUALITY ASSURANCE A. Source Limitations: Obtain INTERIOR ALUMINUM FRAMES and doors through one source from a single qualified manufacturer. B. Manufacturer Qualifications: A firm experienced in the manufacturing of INTERIOR ALUMINUM framing systems and doors with a minimum five (5) years successful in-service performance providing product similar to those indicated for this project, including pre-engineering and pre-fabricating all components of ALUMINUM framing systems and doors.

10 C. Installer Qualifications: An experienced installer with a minimum five years (5) experience who has completed ALUMINUM framing systems and door installations similar in material, design, and extent to those indicated for this project and whose work has resulted in construction with a record of successful in-service performance. October 1, 2013 West Hall Addition Bid Issue Union County Vocational - Technical Schools Scotch Plains, New Jersey INTERIOR ALUMINUM DOORS AND FRAMES 081216 - 3 D.