Transcription of Seismic Bracing - Cooper Industries
1 Seismic BracingSize Range:One size fits Bracing pipe 1"(25mm)thru 2"(50mm), B-Line 12 gauge( )channel, and all structural steel up to 1/4"( ) :SteelFunction:Multi-functional attachment to structure or braced pipe :This product s design incorporates a concentric attachmentopening which is critical to the performance of structural Seismic 13 indicates clearly that fastener table load values are based only onconcentric loading. Mounts to any surface angle. Break off bolt head assuresverification of proper is the structural or transitional attachment componentof a longitudinal or lateral sway brace assembly. It is intended to be combinedwith the " Bracing pipe" and TOLCO "braced pipe" attachment, Fig. 1000, 1001,2002, 4L, 4A or approved attachment to pipe to form a complete bracingassembly. NFPA 13 guidelines should be Install:Place the Fig. 980 onto the " Bracing pipe". Tighten the set bolt untilthe head breaks off.
2 Attachment can pivot for adjustment to proper brace : Underwriters Laboratories Listed in the USA (UL)andCanada (cUL). For FM Approval information refer to page :Fig. 980 Swivel Attachment and Fig. 1001, 1000, 2002, 4A or approvedattachment to pipe that make up a sway brace system of UL Listed attachmentsand Bracing materials which satisfies the requirements of UnderwritersLaboratories and the National Fire Protection Association (NFPA)Finish:Plain, Electro-Galvanized or Stainless Steel. Contact B-Line foralternative By:Figure number and #6,273,372, Pat. #6,517,030, Pat. #6,953,174,Pat. #6,708,930, Pat. #7,191,987, Pat. #7,441,730,Pat. #7,669,806 Eaton s B-Line Business Seismic Bracing components are designed to be compatible only with other B-Line Bracing components, resulting in a listed Seismic Bracing assembly. B-Line s warranty for Seismic Bracing components will be the warranty provided in B-Line s standard terms and conditions of sale made available by B-Line, except that, in addition to the other exclusions from B-Line s warranty, Eaton s B-line Business makes no warranty relating to B-Line s Seismic Bracing components that are combined with products not provided by Eaton s B-Line BraceFig.
3 980 - Universal Swivel Sway Brace Attachment - 3/8 to 3/4 PartMtg. Hole Max. (cULus) (mm)in. (mm)in. (mm)in. (mm)in. (mm)lbs. (kg)980-3/83/8 ( )51/4 ( )17/8 ( )13/32 ( )2015( )149( )980-1/2*1/2 ( )51/4 ( )17/8 ( )17/32 ( )2015( )148( )980-5/85/8 ( )51/4 ( )17/8 ( )11/16 ( )2015( )147( )980-3/43/4 ( )51/4 ( )17/8 ( )13/16 ( )2015( )146( )* Standard HardwareIs Not IncludedSet BoltIncludedFig. 4 LFig. 980 DAll dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise BracingFire Protection Solutions66
