Example: stock market

SEPARATION OF ETHANOL AND WATER BY …

Brazilian Journal of Chemical ISSN 0104-6632. Engineering Printed in Brazil Vol. 25, No. 01, pp. 207 - 215, January - March, 2008. SEPARATION OF ETHANOL AND WATER BY. extractive distillation WITH SALT AND. SOLVENT AS ENTRAINER: PROCESS. SIMULATION. I. D. Gil*, A. M. Uyaz n, J. L. Aguilar, G. Rodr guez and L. A. Caicedo Departamento de Ingenier a Qu mica, Universidad Nacional de Colombia Ciudad Universitaria, Phone: +(57) (1) 3165672, Fax: +(57) (1)-3165617, Carrera 30 45-03, Bogot , Colombia E-mail: (Received: February 1, 2007 ; Accepted : November 6, 2007). Abstract - The aim of this work is to simulate and analyze an extractive distillation process for azeotropic ETHANOL dehydration with ethylene glycol and calcium chloride mixture as entrainer. The work was developed with Aspen Plus simulator version Calculation of the activity coefficients employed to describe vapor liquid equilibrium of ETHANOL WATER ethylene glycol calcium chloride system was done with the NRTL-E.

Separation of Ethanol and Water by Extractive Distillation with Salt and Solvent as Entrainer 209 Brazilian Journal of Chemical Engineering Vol. 25, No. 01, pp. 207 - 215, January - …

Tags:

  Water, Ethanol, Separation, Distillation, Extractive, Separation of ethanol and water by, Separation of ethanol and water by extractive distillation

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of SEPARATION OF ETHANOL AND WATER BY …

1 Brazilian Journal of Chemical ISSN 0104-6632. Engineering Printed in Brazil Vol. 25, No. 01, pp. 207 - 215, January - March, 2008. SEPARATION OF ETHANOL AND WATER BY. extractive distillation WITH SALT AND. SOLVENT AS ENTRAINER: PROCESS. SIMULATION. I. D. Gil*, A. M. Uyaz n, J. L. Aguilar, G. Rodr guez and L. A. Caicedo Departamento de Ingenier a Qu mica, Universidad Nacional de Colombia Ciudad Universitaria, Phone: +(57) (1) 3165672, Fax: +(57) (1)-3165617, Carrera 30 45-03, Bogot , Colombia E-mail: (Received: February 1, 2007 ; Accepted : November 6, 2007). Abstract - The aim of this work is to simulate and analyze an extractive distillation process for azeotropic ETHANOL dehydration with ethylene glycol and calcium chloride mixture as entrainer. The work was developed with Aspen Plus simulator version Calculation of the activity coefficients employed to describe vapor liquid equilibrium of ETHANOL WATER ethylene glycol calcium chloride system was done with the NRTL-E.

2 Equation and they were validated with experimental data. The dehydration process used two columns: the main extractive column and the recovery column. The solvent to feed molar ratio S/F= , molar reflux ratio RR= , number of theoretical stages Ns=18, feed stage Sf=12, feed solvent stage SS=3, and feed solvent temperature TS=80 C, were determined to obtain a distillate with at least % mole of ETHANOL . A. substantial reduction in the energy consumption, compared with the conventional processes, was predicted by using ethylene glycol and calcium chloride as entrainer. Keywords: Simulation; extractive distillation ; Ethylene glycol; Calcium chloride. INTRODUCTION extractive distillation with solvents and salts as separating agents (Fu, 2004a,b); adsorption with Anhydrous ETHANOL is widely used in chemical molecular sieves and processes that include the use industry as powerful solvent and as raw material or of pervaporation membranes (Black, 1980; Lynn and intermediate in chemical synthesis of esters, organic Hanson, 1988; Jacques et al.)

3 , 1999; Pinto et al., and cyclic compound chains, detergents, paints, 2000; Ulrich and Pavel, 1988). All these processes cosmetics, aerosols, perfumes, medicine and food, have had industrial application but some are no among others. Besides, ETHANOL and gasoline longer in use due to the high operating costs, mixtures can be used as fuels reducing operative problems and high energy consumption. In environmental contamination and anhydrous ETHANOL the case of gasoline as separating agent it reverses addition improves octane index (Barba et al., 1985; ETHANOL - WATER volatility, causing WATER to be removed Black, 1980; Chianese and Zinnamosca, 1990; as the top product and ETHANOL , mixed with solvent, Meirelles , 1992). Several processes for ETHANOL to be withdrawn as the bottom product. WATER is dehydration are used such as heterogeneous completely absent in the bottom product, it is azeotropic distillation , which uses different solvents withdrawn in the top mixed with some traces of such as benzene, pentane and cyclohexane; ETHANOL and lighter hydrocarbons.

4 For this reason, the *To whom correspondence should be addressed 208 I. D. Gil, A. M. Uyaz n, J. L. Aguilar, G. Rodr guez and L. A. Caicedo ETHANOL produced by such a process can be used only mixtures, which was simulated and the results were as gasohol and for this particular process the amount in good agreement with industrial data. Also, some of solvent is high and can only be applied with a laboratory studies have been done to separate non- petroleum refinery (Chianese and Zinnamosca, polar systems, such as C4 hydrocarbon mixtures and 1990). polar systems, such as ETHANOL - WATER , from which it extractive distillation is a partial vaporization is possible to reach to some conclusions about the process, in the presence of a non-volatile and high efficiency of separating agents in the processes boiling point separating mass agent that it is usually (Zhigang et al., 2002). Analysis of ETHANOL - WATER called entrainer or separating agent, which is added system was focused on obtaining experimental data to the azeotropic mixture to alter the relative of the vapor-liquid equilibrium for the system volatility of the key component without additional ETHANOL - WATER -ethylene glycol-calcium chloride, as azeotrope formation (Perry et al.)

5 , 1992; Black and well as on performing experimental runs in the Distler, 1972). Generally, entrainer is fed in the laboratory that have allowed to establish some upper part of the column, above the feed stream and operating parameters, reported by Rongqi and it remains in a considerable concentration in the Zhanting (1999). One of the results to enhance from liquid phase along the column. It is withdrawn as a this work is that the separating agent (salt-solvent bottom product with one of the components that are mixture) was recovered in a later stage of the being separated and it is sent to a second SEPARATION and recycled to the process, not being regeneration column operated under vacuum. The necessary to separate the salt and the solvent. most common solvents used in extractive distillation The aim of this work is to study and establish are glycols (Perry et al., 1992; Meirelles et al., 1992), industrial operating conditions for the extractive glycerol (Lee and Pahl, 1985), gasoline (Chianese distillation of ETHANOL using ethylene glycol-calcium and Zinnamosca, 1990) and for the case of saline chloride mixture as entrainer.

6 extractive distillation , acetate and inorganic salts such as: CaCl2, AlCl3, KNO3, (CuNO3)23H2O, Al(NO)39H2O, K2CO3 (Barba et al., 1985; Furter, METHODOLOGY. 1992; Ligero and Ravagnani, 2003; Llano and Aguilar, 2003; Pinto et al. 2000; Schmit and Problem Definition Vogelpohl, 1983). extractive distillation with salts and solvents as All the work was developed using Aspen Plus separating agents turns up as a new possibility to Simulator, version Activity coefficient obtain high purity products. This process combines calculations for the mixture were made with the NRTL- the traditional extractive distillation with the salt E thermodynamic model for electrolytes systems, effect principle. With this combined method, it is which was validated with experimental data reported in possible to solve several eventual problems of previous works (Zhigang et al. 2002) using Aspen Split transport, dissolution, corrosion and obstruction Simulator. In Fig. 1 the flowsheet of the system on found when only salt is used as separating agent.

7 In which the simulation was run is shown. addition, it has the following characteristics (Rongqi The arrangement has a first dehydration column and Zhanting, 1999): to which an alcoholic solution, which is near to the Allows continuous operation because of the high azeotropic composition, is fed on one of the middle efficiency and the low waste of solvent. stages; and separating agent on one of the upper A high purity product can be obtained. stages. As overhead product, in the dehydration The relative volatility of the ETHANOL - WATER system column, alcohol with a molar concentration is is increased, compared to the effect produced by obtained, and as bottom product a mixture of WATER - each of independent agents. entrainer is withdrawn. This mixture is taken to a Improves the solvent performance. Compared second regeneration column, in which vacuum is with normal extractive distillation , the quantity of the applied in order to separate WATER from the separating solvent to recycle is reduced to its fourth or fifth, the agent and recycle it later to the dehydration process, number of theoretical stages required can be reduced while WATER with some content of ETHANOL (stream 5, to its third, as well as energy consumption.)

8 Figure 1) is recycled back to the rectification step There is one industrial packing column reported located in an upstream zone of overall alcohol by Fu (2004b) used to separate ETHANOL - WATER process production. Brazilian Journal of Chemical Engineering SEPARATION of ETHANOL and WATER by extractive distillation with Salt and Solvent as Entrainer 209. Figure 1: Flowsheet for the extractive distillation using salt and solvent. Process Simulation Sensitivity analyses were made and it was possible to visualize the effect of two variables on a specific a) Thermodynamic Model design condition by observing the response surface plots. The efficient operating criteria considered Initially, the thermodynamic model was validated were: energy consumption of the reboilers for each calculating the vapor-liquid pseudo-binary column and the distillate composition in the equilibrium in the Aspen Split simulator by Aspen extractive column, which should be molar of Tech.

9 In Fig. 2 the curve for the vapor-liquid pseudo- ETHANOL . The mole recovery of ETHANOL present in the binary equilibrium ( kPa) for ETHANOL - WATER - azeotropic mixture was over In the recovery ethylene glycol-calcium chloride system is shown, column the main restriction was the purity of the plotted by the simulator with the NRTL-E solvent obtained at the bottom, which was expected thermodynamic model, together with experimental to be WATER free and to be then recycled to the data reported by Zhigang et al. (2002). extractive column without affecting the purity of the ETHANOL recovered. In addition, the bottom b) Configuration temperature should be lower than 150 C to avoid thermal degradation of the solvent (Meirelles et al., In this work the reflux ratio, number of 1992; Stupiello, 2003). For this reason the column theoretical stages required for the SEPARATION , pressure was fixed to reach that condition. azeotropic mixture and separating agent feeding The inlet streams for the process were: azeotropic stages, feed temperature of separating agent, solvent ETHANOL and a mixture of ethylene glycol with purity to feed molar ratio and salt concentration in the higher than molar and calcium chloride in a solvent were evaluated.

10 Operating pressure in concentration near to g/ml of ethylene glycol. extractive column was set at 1 atm. The thermal The basis for the simulation was 100 kmol/h of condition for the azeotropic feed (stream 2) was azeotropic ETHANOL as saturated liquid, condition that saturated liquid, as in other works (Meirelles et al., was used as a starting point in previous works 1992; Ligero and Ravagnani, 2003; Chianese and (Meirelles et al. 1992; Rongqi and Zhanting, 1999). Zinnamosca, 1990); in order to establish a The separating agent was the mixture ethylene comparative pattern of the process from the energy glycol-calcium chloride with a flow rate of 30. consumption viewpoint with respect to other kmol/h in solvent base at 80 C. Other initial input technologies. values were: In Fig. 1 a flowsheet for the simulation of extractive distillation system is shown. The Theoretical stages number for extractive column: 22. extractive distillation column (C1) and the solvent Top stage: 1.


Related search queries