SERVICE MANUAL - Vending World

1 JUN 2004 P/N DCovers Models:3129 -- HR 323130 -- GF23 IIHorizon II3140 -- OutdoorSeriesSERVICEMANUALGLASS FRONTMERCHANDISERINTRODUCTION..1 SPECIFICATIONS..2 GeneralElectricalCapacityPricingUNPACKIN G..2 GROUNDING&ELECTRICAL .. 3 COIN MECHANISM..4 Option Switch SettingDOLLARBILLVALIDATOR.. 5 Removing Accepted Bills6 Troubleshooting6 Clearing Jams & Cleaning7 LOADING PRODUCTS..7 CHANGING TIMING AND TRAY SPACINGT iming8 Tray Spacing9 CONTROLLER FUNCTIONSS ales Mode10 SERVICE Mode11 Displayed Errors.

2 12 ProgrammingtheController ..12 CARE & CLEANING..15 Cabinet InteriorCabinet ExteriorPARTS ORDERING .. 16 AugersProcedureSCHEMATIC0..17 Record the Model Number and Serial Number of your machine Model and Serial numbers will be needed for you to obtain quick SERVICE and parts information for yourmachine. The numbers are available on the identification plate located on the back side of the cabinet of NUMBER:SERIAL NUMBER:iINTRODUCTIONThis MANUAL contains instructions, SERVICE andinstallation guidelines for the Glass FrontMerchandiser product Glass Front Merchandisers are equipped withan electronic control system, which includes awide variety of features that can be programmedand used by the owner/operator as needs programming of the vend functions, pricingand features is done at the controller.

3 Changescan be made without the need of any additionalaccessories or remote accountability provisions allow theowner/operator to retrieve information such as Total Cash transactions and Total Vend cycles that have been performed by the malfunctions are recorded by thecontroller and are displayed when the machine isplaced in the SERVICE Mode. This notifies theservice person of non-functional motors Vending sequence is first-in, first-out foreach selection, eliminating the need for stockrotation to maintain fresh products in the vendarea.

4 Each selection has an individual motor andoperates independently from other vendor can support a satellite vendingmachine,such as a Can Vendor, FoodMerchandiser, or Can/Bottle some cases, to attach a satellite vendor aharness adapter will be required. Refer to thesatellites SERVICE MANUAL for additionalinstallation satellite vendor utilizes the Glass FrontMerchandiser s controller, coin changer, billvalidator (if applicable) and keypad to performthe vend functions they machine is identified by a model numberand a serial number.

5 These identificationnumbers appear on the Serial Number Plateattached to the inside and rear of the these numbers for your records. Allinquires and correspondence pertaining to thisvendor should reference the model and is recommended that this MANUAL be readthoroughly to familiarize the SERVICE person withthe functions of all components, along with thefeatures that are available. The initial set-up of avending machine is a very important step ofinsuring that the equipment operates in a trouble-free manner.

6 By following the instructions at theinitial installation of the machine, serviceproblems can be avoided and set-up time can you have any questions pertaining toinformation in the MANUAL , replacement parts orthe operation of the vendor you should contactyour local distributor or:VendNetTMP. 0. Box 488165 North 10th StreetWaukee, IA 50263-0488 USAPHONE:1-515-274-3641 USA l-800-833-441 1 PARTS FAX:l-5 15-987-4447 SALES FAX:l-5 15-274-0390 GeneralHeight68inches173cmDepth34l/8 87cmWidth3-Wide295116 74cm4-Wide355132 89cm5-Wide 41 104 cmWeight3-Wide501lbs227kg4-Wide572lbs255 kg5-Wide702lbs286kgGlass41 15/16 H x l/8 Thick cm H x.

7 3175 W45 cm60 cmElectricalPowerCycleCurrent115 VAC60 Hz1 AmPCapacity80 - Select Controller Options:80 Snack SelectionsSPECIFICATIONSUNPACKINGTo minimize installation time and to avoidservice problems due to improper installation ,follow the instructions outlined in this machine has been thoroughly inspectedbefore leaving the factory. The delivering carrierhas accepted this vendor as its damage or irregularities should be noted atthe time of delivery and reported to the a written inspection report from theclaims inspector to file any claim for the claim with the carrier [not themanufacturers within 15 days after receipt of Snack Selections & 12 Satellite CannedDrink SelectionsPricingMDB Coin MechanismCarefully remove the outside packing material ina manner not to damage the finish or exterior ofthe machine.]

8 Inspect the machine for concealedshipping damage. Report any damage hidden bythe shipping material directly to the deliveringcarrier on a hidden damage the model number and serial number ofthe vendor for your records. These numbers areon the Serial Plate on the back or inside of theecabinet. Refer to these numbers on allcorrespondence and inquiries pertaining to the Knock-A-Way skid boards. Placea 2 x 4 under the vendor, insert a screwdriver orprying tool into the groove of the Knock-A-Wayand split it in two.

9 Turn the leveling screws in asfar as possible. See Figure the vendor no further than nine feet( meters) from the power outlet or receptacleand check that the door will open fully the vendor, making sure all levelers aretouching the floor. The vendor & be level forproper operation and acceptance of coins throughthe coin mechanism. When the vendor is level,the door can be opened to any position and notmove by itself. Try the door half closed, straightout and in a wide open keys to the vendor are shipped in the coinreturn cup.

10 Open the outer door and remove allinternal packing all local, state and federal codes andregulations before installation of the & ELECTRICALP rior to connecting the equipment, the integrityof the main electrical supply must be checked forcorrect polarity, presence of ground and correctvoltage. It is recommended that these checks berepeated at 6-month intervals with the routinesafety electrical testing of the equipment correct negative voltage, amperage, polarity,or ground checks, consult a licensed noise suppresser has been installed in thismachine to compensate for any main line signalnoise that could interfere with the normaloperation of the 115 V vendors, the power source should be115 VAC (HO%)