Example: marketing

SERVICE TECHNICAL BULLETIN - Jaguar X Type …

Date of issue 07/02 BULLETIN Number XT419-02 page 1 of 30 DATEXT419-0207/02 SERVICETECHNICAL BULLETINP assive Anti -Theft System (PATS) Diagnostic Flowcharts2002 MY-ONX-TYPEC00001-ONMODELVINX-TYPEI ssue:This BULLETIN provides diagnostic information for the Passive Anti-Theft :Refer to the following information when diagnosing PATS on a 2002 MY-ON FLOWCHARTS P1260 - Security input (Page 2) Passive Anti-Theft System (To be used to interpret the type of failure)( pages 3 and 4)PATS Customer fault code flowcharts. B1681 - fault code 11 ( pages 5, 6, 7 and 8) B1600 - fault code 13 ( pages 9 and 10) B1602 - fault code 14 ( pages 11, 12, 13 and 14) B1601 - fault code 15 ( pages 15, 16 and 17) U2511/U1900 - fault code 16 (Page 18)PATS Non-Customer fault code flowcharts.

Date of issue 07/02 Bulletin Number XT419-02 Page 1 of 30 DATE 07/02 XT419-02 SERVICE TECHNICAL BULLETIN Passive Anti -Theft System (PATS) – Diagnostic Flowcharts 2002 MY-ON

Tags:

  Services, Technical, Pages, Bulletin, Page 1, Jaguar, Service technical bulletin

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of SERVICE TECHNICAL BULLETIN - Jaguar X Type …

1 Date of issue 07/02 BULLETIN Number XT419-02 page 1 of 30 DATEXT419-0207/02 SERVICETECHNICAL BULLETINP assive Anti -Theft System (PATS) Diagnostic Flowcharts2002 MY-ONX-TYPEC00001-ONMODELVINX-TYPEI ssue:This BULLETIN provides diagnostic information for the Passive Anti-Theft :Refer to the following information when diagnosing PATS on a 2002 MY-ON FLOWCHARTS P1260 - Security input (Page 2) Passive Anti-Theft System (To be used to interpret the type of failure)( pages 3 and 4)PATS Customer fault code flowcharts. B1681 - fault code 11 ( pages 5, 6, 7 and 8) B1600 - fault code 13 ( pages 9 and 10) B1602 - fault code 14 ( pages 11, 12, 13 and 14) B1601 - fault code 15 ( pages 15, 16 and 17) U2511/U1900 - fault code 16 (Page 18)PATS Non-Customer fault code flowcharts.

2 B1213 - fault code 21 ( pages 19 and 20) B2141 - fault code 22 ( pages 21 and 22) U2510 - fault code 23 ( pages 23 and 24)ADDITIONAL INFORMATION Passive Anti-Theft System Overview (Page 25) Engine Control Module (ECM) PATS functionality (Page 26) Fault code reading (from PATS LED) (Page 27) DTC Desciptions (Page 28) Generic Connector Inspection (Page 29) Generic Harness Check (Page 30)P1260 Security InputUse the Worldwide Diagnostic System (WDS) to interrogate the EngineControl Module (ECM) for DiagnosticTrouble Codes (DTC)Was a faultidentified via PATS prove out?NOGo to the associatedflowchartYESIf P1260 is logged, check that the Passive Anti-Theft System(PATS) prove-out is not reporting any faults via the LightEmitting Diode (LED)See Additional InformationFault Code ReadingWas a fault foundand rectified?

3 YESNOENDC ontact TECHNICAL Hotline for further assistanceUsing Module Communications Network from the Content Model menu,then CAN the Network Integrity Date of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 2 of 30 Passive Anti-Theft SystemFaults with the Passive Anti-Theft System (PATS)are reported by the Instrument Cluster asDiagnostic Trouble Codes (DTCs) and Fault Codesvia the Light Emitting Diode (LED)If possible, ensure all customer keys are present,before proceedingSwitch the ignition 'ON'Did the PATS LED illuminate whenthe ignition was switched'ON'?Use the WDS toinvestigate LED failureNOYESAR efer to the ElectricalGuide on JTISIs theInstrument Cluster Oil, Batteryand Message CenterIlluminated?Check batterycondition and powersupplies/ignitioncircuits to InstrumentClusterWasa fault found andrectified?

4 YESYESNONOENDC ontact TECHNICAL Hotline for further assistance Date of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 3 of 30 ADoes the PATS LED flash whenthe ignition is switched'ON'?YESR efer to the relevant flowchartPATS customer fault - fault code 11B1600 - fault code 13B1602 - fault code 14B1601 - fault code 15U2511/U1900 - fault code 16 Does the PATS LED extinguishafter 3 seconds?NOYESNo faults indicated inprove outNOWait for 60 seconds then read thefault codeRefer to the relevant flowchartPATS 'Non' Customer faultcodesB1213 - fault code 21B2141 - fault code 22U2510 - fault code 23 Wait for 60 secondsthen read the faultcodeSee Additional Fault Code ReadingSee Additional Fault Code ReadingPassive Anti-Theft System Cont. Date of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 4 of 30 Diagnostic Trouble Code B1681 Fault Code 11 Was thereading asexpected?

5 Disconnect PATS Transceiver electricalconnector IP015 and carry out aGeneric Connector InspectionWith the ignition 'ON'using a Digital Multi Meter (DMM) check for voltage at electricalconnector IP015 pin 001. Expected reading > 9 voltsYESNOWas a fault foundand rectified?ENDYESNOWhen inspecting the connector, payparticular attention to the wireclamp, ensuring it is clipped fullyhome. Also ensure the wiresprotruding through the connector aretrimmed correctly and not shortingAVisually inspect fitment of Passive Anti-Theft System(PATS) Transceiver and electrical connectorDisconnect Instrument Cluster electricalconnector IP010and carry out Generic Connector InspectionSee Additional InformationGeneric ConnectorInspectionSee AdditionalInformationGeneric Harness CheckContact TECHNICAL Hotline for further assistanceSee Additional InformationGeneric ConnectorInspectionCarry out a Generic Harness Check between PATS Transceiverelectrical connector IP015 pin 001 andInstrument Cluster electrical connector IP010 pin 006(Green wire)

6 Date of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 5 of 30 ACheck for continuity between the PATS Transceiver electricalconnector IP015 pin 002 and the Instrument Cluster electricalconnector IP010 pin 005 (Black wire)Was a fault foundand rectified?ENDYESNOSee Additional InformationGeneric Harness CheckDisconnect Instrument Cluster electrical connectorIP010and carry out a Generic Connector InspectionSee Additional InformationGeneric ConnectorInspectionNOWith the ignition 'ON'using a DMMcheck for a ground supply at PATS Transceiverelectrical connector IP015 pin 002 BYESWas the readingas expected?Contact TECHNICAL Hotline for further assistanceSee AdditionalInformationGeneric Harness CheckB 1681 Cont. Date of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 6 of 30 BWith the ignition 'ON'using a DMM check for voltage at PATS Transceiver electricalconnector IP015 pin 003.

7 Expected reading > 9 voltsYESNOC heck for continuity between PATS Transceiver electrical connectorIP015 pin 003 and Instrument Cluster electrical connector IP010 pin 003(White and green wire)Disconnect Instrument Cluster electrical connectorIP010and carry out a Generic Connector InspectionSee Additional InformationGeneric Harness CheckWas a fault foundand rectified?ENDYESC ontact TECHNICAL Hotline for further assistanceNOCSee Additional InformationGeneric ConnectorInspectionWas thereading asexpected?B 1681 Cont. Date of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 7 of 30 CCheck for continuity between PATS Transceiver electricalconnector IP015 pin 004 and Instrument Cluster electrical connector IP010 pin 004(Orange wire)YESENDWas a fault foundand rectified?Disconnect Instrument Cluster electrical connectorIP010and carry out a Generic Connector InspectionSee Additional InformationGeneric Harness CheckReplace faulty PATS TransceiverNOSee Additional InformationGeneric ConnectorInspectionB 1681 Cont.

8 Date of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 8 of 30 Insert another key into ignition andswitch the ignition 'ON'Diagnostic Trouble Code B1600 Fault Code 13 Switch the ignition 'OFF'and remove the key from ignitionIs thePassive Anti-Theft System(PATS) LED flashing?NOYESDoes the PATS LED extinguish after3 seconds?YESNOR eplace the originalignition keyLED on constantly for 60secondsRead the 'Non' Customer fault codeand follow the relevant flowchartANote: Ensuremore thanone key isavailableEnsure all availableignition keys areclear of fault codeswithin the PATS prove-out, before thevehicle is returned tothe customerDate of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 9 of 30 Isfault code 13 stillpresent?YESNOR eplace faulty PATST ransceiverWait for 60 seconds Follow the relevant flowchartAEnsure all availableignition keys areclear of fault codeswithin the PATS prove out, before thevehicle is returned tothe customerB1600 other faultcodes present?

9 YESR eplace the originalignition keyNO Date of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 10 of 30 Areany non- Jaguar keysattached to the keyring?Diagnostic Trouble Code B1602 Fault Code 14Is the Passive Anti-TheftSystem (PATS) LEDflashing?NOYESDoes the PATS LED extinguish after3 seconds?YESNOLED on constantly for 60secondsRead the 'Non' customer fault codeand follow the relevant flowchartAYESS eparate Jaguar keys from key ringSwitch the ignition 'ON'Notify customer thatattachments on key ring areinterfering with key transponderNOBE nsure all availableignition keys are clear offault codes within PATS prove-out, before returningthe vehicle to thecustomerNote: Ensuremore thanone key isavailable Date of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 11 of 30 Is thefault code 14 stillpresent?

10 YESWait for 60 secondsIf other fault codes are present,follow the relevant flowchartAInsert another key into ignition,switch the ignition 'ON'Is the PATS LEDflashing?NODoes the PATS LED extinguish after3 seconds?NOLED on constantly for 60 secondsRead the 'Non' customer fault codeand follow the relevant flowchartYESR eplace original ignition keyIs thefault code 14 stillpresent?Replace faulty PATS TransceiverYESYESWait for 60secondsNOB1602 all availableignition keys are clear offault codes within PATS prove-out, before returningthe vehicle to thecustomerAs the 2nd key has indicated anotherfault, rectify that fault first and thenrecheck original keyNO Date of issue 07/02 z TECHNICAL BULLETIN XT419-02 Page 12 of 30 BInsert another key into ignition,switch the ignition 'ON'Is the PATS LEDflashing?


Related search queries