Service Tool Instruction - Cummins Inc.

1 Service Tool InstructionDescriptionINLINE 6 Data Link Adapter KitPart Number2892092 Date15-Aug-2012 Bulletin Number3400419-2 This document provides information for the INLINE 6 Data Link Adapter Kit, Part Number 2892092, and theassociated cables to connect a personal computer to the data link adapter. The INLINE 6 data link adapter isdesigned for use with the SAE J1708 and J1939 standard protocols. The INLINE 6 data link adapter is used withsoftware applications such as INSITE Electronic Service Tool and later versions. The INLINE 6 supports allCummins Inc. electronic 1, INLINE 6 Data Link Adapter Kit, Part Number 2892092 ItemNumberPart NumberDescriptionQuantity12892093 INLINE 6 data link adapter122892176 USB cable, ( m [14 feet])133163096J1939 backbone adapter143163597J1939 gender change adapter154919780 Data link cable (DB25F 9-Pin Deutsch connector)164918713 Storage case172892095 INLINE 6 software compact disc182892096 INLINE 6 ruggedized protective boot193165141DB25F/2-pin Weather-Pack /2-pin Weather-Pack /3-pin Deutsch cable1 Cummins Inc.

2 , Box 3005, Columbus, Indiana 47202-3005 Cummins Ltd., Daventry, Northants, England NN11 8 NURegistered Office: 49 - 51 Gresham Road, Staines, Middlesex TW18 2BD, EnglandRegistered No. 573951 EnglandCopyright Cummins rights reservedPage 1 of 3 Table 2, Items Used with INLINE 6 Data Link Adapter Kit, Part Number 2892092, Purchased SeparatelyItemNumberPart NumberDescriptionQuantityNot Shown4919797DB25F/3-pin Deutsch /3-pin Deutsch /2-pin Weather-Pack cable1 Not Shown3824440DB25F 8-Pin AMP connector1 Not Shown4918418DB9F-DB9M serial cable1 Not Shown3165160DB25F/6-pin Deutsch cable1 NOTE: A fully populated USB cable, Part Number 2892176, or DB9F-DB9M, serial cable, Part Number 4918418,must be the DB9F-DB9M serial cable, Part Number 4918418, or the USB cable, Part Number 2892176 to the RS-232serial port or the USB port of the computer and to the INLINE 6 data link adapter, Part Number INLINE 6 data link adapter requires +8-VDC to +50-VDC at 250mA that can be supplied through the OEMconnector or by a separate power the appropriate data link cable to the INLINE 6 data link adapter, Part Number the data link cable connected to the INLINE 6 data link adapter, connect the other end of the data link cable tothe vehicle cab or engine compartment data link the electronic Service tool application following are the INLINE 6 Adapter Indicator Lamp Functions.

3 Power Lamp When the power lamp is lighted green continuously, this means DC power is being supplied to the adapter at theproper voltage level. The INLINE 6 adapter requires +8-VDC to +50-VDC at 250 mA that can be suppliedthrough the OEM connector or by a separate power source. When the power lamp is lighted red continuously, this means that either the INLINE 6 adapter is receiving a lowpower supply voltage (less than 8-VDC) or is only receiving power from the USB port. When the power lamp is off, this means that the INLINE 6 is receiving no 1 Port Lamp A CAN 1 red flashing lamp indicates that the INLINE 6 adapter is physically connected to a CAN data , it is not communicating with an ECM on the CAN data link. A CAN 1 green flashing lamp indicates thatthe INLINE 6 adapter is communicating with an ECM on the CAN data 2 CAN 2 Port Lamp A CAN 2 red flashing lamp indicates that the INLINE 6 adapter is physically connected to a CAN data , it is not communicating with an ECM on the CAN data link.

4 A CAN 2 green flashing lamp indicates thatthe INLINE 6 adapter is communicating with an ECM on the CAN data Port Lamp A J1708 red flashing lamp indicates that the INLINE 6 adapter is physically connected to a J1708 data , it is not communicating with an ECM on the J1708 data link. A J1708 green flashing lamp indicates thatthe INLINE 6 adapter is communicating with an ECM on the J1708 data Port Lamp An RS-232 green flashing lamp indicates that the INLINE 6 adapter is connected to an active RS-232 port andexchanging communications. An RS-232 lamp in the OFF state indicates that the INLINE 6 adapter is notcommunicating over the RS-232 Port Lamp A USB green flashing lamp indicates that the INLINE 6 adapter is connected to an active USB port and isexchanging communications.

5 A USB lamp in the OFF state indicates that the INLINE 6 adapter is notcommunicating over the USB 3