Transcription of Shell Spirax S4 TXM
1 Technical Data SheetPrevious Name: Shell donax TDShell Spirax S4 TXMP remium SAE 10W-30 Multi-functional Tractor Transmission and Hydraulic OilPremium universal tractor transmission oil (UTTO) designed for use in transmissions, hydraulic systems, oilimmersed brakes and other ancillary systems fitted to agricultural tractors and off-road equipment. Spirax S4 TXM is recognised by leading agricultural equipment manufacturers and suitable for use in most , Features & BenefitsEnhanced protection Excellent anti-oxidation, shear-stability, anti-wear, anti-corrosion and anti-foam characteristics result from the useof the latest additive technology leading to greater reliabilityand reduced down time thus minimising cost andmaximising comfort The excellent low temperature fluidity of Spirax S4 TXMresults in responsive hydraulic performance and smoothgearshift performance, from cold starts to maximumoperating temperatures.
2 Friction modifying additives helpcreate smooth, noise-free operation of oil immersed recognition Shell Spirax S4 TXM has been tested and approved by awide range of equipment ApplicationsAgricultural tractor transmissions Shell Spirax S4 TXM has been evaluated against the latestrequirements of leading tractor and transmissionmanufacturers including John Deere, Massey Ferguson,CNH and systems Shell Spirax S4 TXM is ideally suited for hydraulic systemsof tractors and ancillary equipment. Spirax S4 TXM isformulated using specially selected additives and highquality base oils to provide good low temperature fluidityand wear immersed brakes Special friction modifying additives are included in Spirax S4 TXM to ensure optimum performance of oil immersed brakeswhilst minimising brake noise. Spirax S4 TXM isrecommended for most wet brake systems fitted toagricultural tractors and off-highway construction !
3 Not to be used as an Engine , Approvals & RecommendationsSuitable for use in applications where Allison C-4 type fluidsare required Spirax S4 TXM can be used when a SAE J 306 85W gradeis recommended Case New Holland MAT-3525, M2C-134 A-D, John Deere JDM-J20C Massey-Ferguson M1143, M1145 Volvo WB 101, Transmission Oil 97303:015 ZF TE-ML 03E, 05F, 06D, 06K, 06M, 06N, 06R, 17E, 21F Caterpillar TO-2 Komatsu - recommended for use in certain constructionequipment Dana-Spicer mechanically controlled transmissions Shell Spirax S4 TXM is also recommended for use in Caseequipment where fluids meeting MS 1207, 1209 or 1210 arespecified API Gear Performance : API GL-4 For a full listing of equipment approvals andrecommendations, please consult your local Shell 1 of 2 Spirax S4 TXM, v Typical Physical Characteristics These characteristics are typical of current production. Whilst future production will conform to Shell 's specification,variations in these characteristics may occur.
4 PropertiesMethodShell Spirax S4 TXMSAE Viscosity GradeSAE J 30010W-30 Kinematic Viscosity@400 Cmm2/sISO 310460 Kinematic Viscosity@1000 Cmm2/sISO IndexISO 2909138 Density@150 Ckg/m3 ISO 12185882 Flash Point (COC)0 CISO 2592220 Pour Point0 CISO 3016-42 Health, Safety & EnvironmentHealth and Safety Shell Spirax S4 TXM is unlikely to present any significant health or safety hazard when properly used in the recommendedapplication and good standards of personal hygiene are contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained the Environment Take used oil to an authorised collection point. Do not discharge into drains, soil or InformationAdvice Advice on applications not covered here may be obtained from your Shell 2 of 2 Spirax S4 TXM, v
