Shell Spirax S6 ATF VM Plus - shell-livedocs.com

1 Typical Physical Characteristics Technical Data SheetShell Spirax S6 ATF VM PlusPremium Technology Voith Long Drain Automatic Transmission FluidShell Spirax S6 ATF VM plus Oil is a premium performance, automatic transmission fluid specifically designedfor use in Voith Turbo transmissions. Spirax S6 ATF VM plus is recommended for extended oil drain intervals inthe and transmissions for 180,000km, while it is also suitable for and older DIWA transmissions at the extended oil drain interval of 120, , Features & BenefitsState-of-the-art technology Shell Spirax S6 ATF VM plus has been developed withstate-of-the art additive technology and carefully chosenbase oils in conjunction with Voith hardware, to insure theutmost in Voith transmission oil drain interval potential This technology developed specifically for Voithtransmissions.

2 Allows up to the maximum oil drain intervalsin and transmissions depending onoperating conditions. It is also suitable for or olderVoith transmissions at an oil drain interval up to 120,000km. This will allow fleets the versatility to use one productfor all Voith heavy-duty automatic transmissions.* The oil drain interval might change according to transmission models and operation conditions. Please, referto owner s manual to check the proper interval for your region, according to manufacturer low temperature fluidity The physical characteristics provided by the additivetechnology and base fluid allows for extremely lowtemperature fluidity, further protecting the transmissioncomponents from premature wear under extreme coldoperating comfort and maintenance costs The combination of these features and benefits translate intosmooth shifting comfort.

3 And lower maintenance cost due toextended drain intervals and transmission component ApplicationsHeavy duty automatic transmissions Shell Spirax S6 ATF VM plus is a specifically developedproduct for Voith Turbo heavy-duty transmissions used invarious applications, including public transport, highway andcity , Approvals & RecommendationsZF TE-ML 4D, 14B, 16L, 17C MAN Sach-Nr. MB-Approval , Voith , Section Suitable for ZF TE-ML 03D, 09 For a full listing of equipment approvals andrecommendations, please consult your local Shell TechnicalHelp Spirax S6 ATF VMPlusKinematic Viscosity@400 Cmm2/sISO Viscosity@1000 Cmm2/sISO IndexISO 2909183 Density@150 Ckg/m3 ISO 12185850 Flash point COC0 CISO 2592222 Pour point0 CISO 3016-48 Page 1 of 2 Spirax S6 ATF VM plus , v characteristics are typical of current production.

4 Whilst future production will conform to Shell 's specification,variations in these characteristics may occur. Health, Safety & EnvironmentHealth and Safety Shell Spirax S6 ATF VM plus is unlikely to present any significant health or safety hazard when properly used in therecommended application and good standards of personal hygiene are contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from yourShell the Environment Take used oil to an authorised collection point.

5 Do not discharge into drains, soil or InformationAdvice Advice on applications not covered here may be obtained from your Shell 2 of 2 Spirax S6 ATF VM plus , v