Transcription of Shell Spirax S6 AXRME 75W-90
1 Technical Data SheetPrevious Name: Shell Spirax ASX-R 75W-90 Shell Spirax S6 AXRME 75W-90 Extended drain, OEM quality, synthetic, api gl -5 axle oil for Dana (Roadranger), Meritor, and Detroit AxleShell Spirax S6 AXRME 75W-90 is a fuel-efficient axle fluid, designed to provide ultimate protection to the latestheavy-duty axles that call for an api gl -5 type product. Specially formulated with synthetic base oils and additivetechnology that provide improved lubrication of the drive train, lowers the operating temperature and helpspromote longer life for the equipment. Shell Spirax S6 AXRME 75W-90 is capable of extended oil drain and isapproved by several OEMs for their extended drain specifications.
2 Standard industry and commercial fleet testinghave demonstrated a fuel efficiency improvement of over 1% when compared to several products in the , Features & BenefitsFuel efficient formulation Proven fuel efficiencies in both standard industry andcommercial fleet testing methods of over 1%.Longer oil drain capability Meets requirements of Dana SHAES 256 Rev. C, , Meritor O76-N, and Navistar MPAPS B-6816for drain intervals up to 500,000 miles with equipment life Excellent protection against gear wear and pitting, helpsprevent premature failures. Outstanding Oxidationresistance also helps prevent damage to seals due todeposit lubricant usage Excellent static and dynamic Seal Compatibility that meetsor exceeds a number of leading OEM requirements, whichhelps minimize Seal leaks.
3 The extended drain capabilitieshelp maximize oil drain intervals resulting in less overalllubricant usage during the life of the by leading equipment manufacturers A number of leading equipment manufacturers recognizethe benefits of Shell Spirax S6 AXRME 75W-90 and haveformally approved it against their ApplicationsDrive axles in heavy duty on-highway trucks Commercial vehicle axles, gear sets, and transmissionswhere SAE 75W-90 , api gl -5, API MT-1 and SAE J2360oils are required/recommended in mineral or synthetic be used in the specification listings , Approvals & RecommendationsMeritor O76-N DANA SHAES-256 Rev C Navistar MPAPS B-6816 (International Trucks) Mack GO-J Plus api gl -5, MT-1 SAE J2360 US Military MIL-PRF-2105E (Obsolete) Detroit Fluids Specification For a full listing of equipment approvals andrecommendations, please consult your local Shell TechnicalHelp 1 of 2 Spirax S6 AXRME 75W-90 , v physical characteristics These Characteristics are typical of current production.
4 While future production will conform to Shell 's specification,variations in These Characteristics may occur. PropertiesMethodShell Spirax S6 AXRME75W-90 SAE Viscosity GradeSAE J-30675W-90 AppearanceAmberKinematic Viscosity@1040 FcStASTM D-445103 Kinematic Viscosity@2120 FcStASTM D-44515 Viscosity@-400 FcPASTM D-298390000 Viscosity IndexASTM D-1298891 Density600 Point (COC)0C/ (0F)ASTM D--92215 / (420)Pour Point0C/ (0F)ASTM D-97<-45 / (<-49)Heath, Safety & EnvironmentHealth and Safety Shell Spirax S6 AXRME 75W-90 is unlikely to present any significant health or safety hazard when properly used in therecommended Application and good standards of personal hygiene are contact with skin.
5 Use impervious gloves with used oil. After skin contact, wash immediately with soap and on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from yourShell the Environment Take used oil to an authorized collection point. Do not discharge into drains, soil or InformationAdvice Product recommendations for applications not covered here may be obtained from your Shell 2 of 2 Spirax S6 AXRME 75W-90 , v
