Transcription of Shell Spirax S6 GME 50
1 Typical physical characteristics Technical Data SheetPrevious Name: Shell Spirax GSX 50 Shell Spirax S6 GME 50 Premium Synthetic ZF freedom line and Eaton Long Drain Manual Transmission OilShell Spirax S6 GME 50 is the latest addition to the Shell Spirax family of axle and transmission fluids. It is asynthetic heavy-duty transmission fluid specially formulated for extended drain and severe service fluid is approved as a Roadranger Genuine Lubricant for use in Eaton extended warranty , Features & BenefitsAll-climate year round performance Formulated from synthetic base stocks and additives, whichprovide fluidity at sub-zero temperatures as well as lubricityand film strength at elevated drain intervals Engineered to provide extended drain capabilities intransmissions such as Eaton.
2 Volvo and transmission life Contains an effective anti-wear system along with corrosionand oxidation inhibitors that protect system componentsand helps achieve longer transmission life and potentialreduced maintenance costs and less down for increased Fuel economy over the oil draininterval The enhanced oxidative stability of the product helpsmaintain the original viscosity of the fluid, therebyincreasing the potential for Fuel economy savings over thedrain of the Shell family of heavy-duty lubricants andcoolants Main ApplicationsHeavy-Duty transmissions Synchromesh gearboxes, including those with integratedretarders, and medium loaded axle drives where mineral orsynthetic non EP gear oils are , Approvals & RecommendationsEaton PS-164 rev 7 Navistar TMS 6816 Mack Truck TO-A-Plus Volvo 97305 ZF FreedomLine API Service Classification MT-1 For a full listing of equipment approvals andrecommendations, please consult your local Shell Spirax S6 GME 50 SAE Viscosity GradeSAE J-30050 AppearanceVisualLight amberViscosity@2120 FcStASTM @1040 FcStASTM D-445132 Viscosity@2100 FSUSASTM @1000 FSUSASTM D-2161678 Viscosity@-400 FcPASTM D-2983104000 Page 1 of 2 Spirax S6 GME 50, v Characteristics are typical of current production.
3 While future production will conform to Shell 's specification,variations in These Characteristics may occur. PropertiesMethodShell Spirax S6 GME 50 Viscosity IndexASTM D-2270146 Pour Point0C (0F)ASTM D-97<-45 (<-49)Flash Point0C (0F)ASTM D-92221 (430)Foam (Sequence I)ASTM D-892passFoam (Sequence II)ASTM D-892passFoam (Sequence III)ASTM D-892passAPI Strip Corrosion (3 hrs)@1000C (212 F)ASTM D-1301a passCopper Strip Corrosion (3 hrs)@1210C (250 F)ASTM D-1301a passHeath, Safety & EnvironmentHealth and Safety Shell Spirax S6 GME 50 is unlikely to present any significant health or safety hazard when properly used in therecommended Application and good standards of personal hygiene are contact with skin.
4 Use impervious gloves with used oil. After skin contact, wash immediately with soap and on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained the Environment Take used oil to an authorized collection point. Do not discharge into drains, soil or InformationAdvice Product recommendations for applications not covered here may be obtained from your Shell 2 of 2 Spirax S6 GME 50, v
