Transcription of Shell Tonna S3 M 220
1 Technical Data SheetPrevious Name: Shell Tonna SShell Tonna S3 M 220 Extra Machining Accuracy Standard Applications Premium machine tool slideway oilsShell Tonna S3 M oils are specially designed for the lubrication of machine tool slides, tables and feedmechanisms. Their enhanced tackiness and stick-slip characteristics are combined to offer superior frictionalperformance on slideways. They are specially recommended in cases where high precision and low speedmachines are used as well as in combined lubrication , Features & BenefitsExcellent frictional properties Specially developed to overcome stick-slip problems withslow moving machine tool slides and tables, allowing moreaccurate positioning. This provides benefits of improvedfinished surface quality and dimensional accuracy of technology Developed in conjunction with machine tool manufacturersto meet the requirements of the most advanced machinetools using a wide variety of slideway slideway adhesion Provides strong adhesion to slideway surfaces.
2 Resistingwash-off by metalworking fluids and those reducing oilconsumption and giving more uniform working condition forthe separation from water-miscible cutting fluids Separates readily from water-miscible metalworking fluidsallowing easy removal by anti-wear performance Provides high levels of anti-wear protection for slidewaysand gears making the product particularly suitable formachines with combined corrosion prevention characteristics Provides effective protection of machine tool surfaces andcomponents in the presence of water-miscible ApplicationsMachine tool slideways, tables and feed mechanisms Developed for use on a wide range of materials used formachine tool slideway surfaces, including cast iron andsynthetic tool gearboxes and spindles Also suitable for gear and headstock lower viscosity grades are intended for horizontal slidelubrication ( Shell Tonna S3 M 32 or 68).
3 For vertical slidesuse Shell Tonna S3 M , Approvals & RecommendationsFives Cincinnati P-50 (IS0 220), P-47 (ISO 68) ISO 11158 / ISO 6743-4 HG ISO 12925-1 / ISO 6743-6 CKC ISO 19378 / ISO 6743-13 GA and GB CGLP Slideway Oils against DIN 51502 For a full listing of equipment approvals andrecommendations, please consult your local Shell 1 of 2 Tonna S3 M 220, v Physical Characteristics These characteristics are typical of current production. Whilst future production will conform to Shell 's specification,variations in these characteristics may occur. PropertiesMethodShell Tonna S3 M 220 ISO Viscosity GradeISO 3448220 Kinematic Viscosity@400 Cmm2/sISO 3104220 Kinematic Viscosity@1000 Cmm2/sISO IndexISO 290998 Density@150 Ckg/m3 ISO 12185894 Flash Point (Cleveland Open Cup)0 CISO 2592250 Pour Point0 CISO 3016-15 Health, Safety & EnvironmentGuidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained Protect the Environment Take used oil to an authorised collection point.
4 Do not discharge into drains, soil or InformationAdvice Advice on applications not covered here may be obtained from your Shell 2 of 2 Tonna S3 M 220, v
