Shell Turbo Oil J 32 - ozgunshell.com

1 Typical Physical Characteristics Technical Data SheetShell Turbo Oil J 32 Premium Industrial Turbine OilShell Turbo Oil J has been specially formulated to satisfy the demanding requirements of the MHI (Mitsubishi HeavyIndustry) non-geared steam & gas is based on a blend of specially chosen high quality hydrotreated base oils with selected additives to enhance theirrust and oxidation , Features & BenefitsGood thermal and oxidation stabilityResists the formation of sludge and other harmful products ofoxidation, giving long oil life. Excellent corrosion protectionHigh level of corrosion protection of all metal surfaces. Excellent oil/water separation propertiesEasy drainage of excess water from lubrication systems.

2 Good air release characteristicsEffective air release without excessive foaming. Reliable performance in MHI turbinesShell Turbo Oil J meets the requirements of MHI turbines andhas been successfully tested in the MHI in-house dry TOST test. Main ApplicationsPower generation MHI turbinesShell Turbo Oil J may also be used for other industrialapplications requiring high quality rust and oxidation (R & O)inhibited oils, which separate easily from water. Specifications, Approvals & RecommendationsShell Turbo Oil J is approved by MHI against theirspecifications Turbine Oil Type 2 (additive) MS04-MA-CL001(R-2) and MS04-MA-CL002 (R-2).

3 For a full listing of equipment approvals and recommendations,please consult your local Shell Technical Helpdesk. PropertiesMethodTurbo J 32 Viscosity@400 CcStASTM D44532 Viscosity@1000 CcStASTM IndexASTM D2270104 ColourASTM D1500L Point0 CASTM D97-18 Flash Point (COC)0 CASTM D92222 Total Acid Numbermg KOH/gASTM Seq Iml/mlASTM D89230/NilFoaming Seq IIml/mlASTM D89220/NilFoaming Seq IIIml/mlASTM D89230/NilWater Separability@540 CminASTM D140140-40-0(10)Air Release, MinutesASTM D3427<4 Copper Corrosion (3 hrs)@1000 CASTM D1301bRust ControlASTM D665 BPassOxidation Control Test - TOST LifehrASTM D943>8000 Oxidation Control Test - Dry TOSTMHI MethodPassOxidation Control Test - RPVOT - minutesminASTM D2272>950 Page 1 of 2 Shell Turbo Oil J 32, v characteristics are typical of current production.

4 Whilst future production will conform to Shell 's specification, variations inthese characteristics may , Safety & EnvironmentGuidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained Protect the EnvironmentTake used oil to an authorised collection point. Do not discharge into drains, soil or water. Additional InformationAdviceAdvice on applications not covered here may be obtained from your Shell representative. Page 2 of 2 Shell Turbo Oil J 32, v