shield anchor eyebolt - construction fixings

1 shield anchor eyebolt 1 Tdhhhdinstfef1minodsdnoml Force-controlled anchor with internally thread without screw or bolt allow client-specified applications. Expansion corpus and cone made of steel. Strong expansion in the depth of the drill Take drill hole- and drill hole depth from the table. Clean the drill hole with a brush, then blow it out with a purging pump. Insert the shield anchor into the building materials QualitiesNo. Name Material 1 anchor Zinc plated steel Assembling in most concrete qualities, natural stone and solid brick.

2 Application also in some perforated materials. Disassembling possible. Position the Building materials and fix it with a screw. Tighten the screw with a torque spanner to the predetermined value Tinst. Gap fixing. Connection assembling. Floor assembling. Application on metal, machines, scaffolds, facades and door constructions. Versatile and reusable application of anchor rods and screws with most qualities and head data sheet All information detailed in our data sheets is based on technical approvals, formulas and site and laboratory testing under optimum conditions and include a stated safety factor.

3 As we have no direct or indirect control over where or how our products are applied or installed, we do not accept any liability either directly or indirectly arising from the use of our products, whether or not in accordance with any advice, specifi cation or reccomendation given by us and we reccomend site testing of all products for : constructionfi data sheet www: constructionfi information detailed in our data sheets is based on technical approvals, formulas and site and laboratory testing under optimum conditions and include a stated safety factor.

4 As we have no direct or indirect control over where or how our products are applied or installed, we do not accept any liability either directly or indirectly arising from the use of our products, whether or not in accordance with any advice, specifi cation or reccomendation given by us and we reccomend site testing of all products for anchor eyeboltAnchor sizeM6M8M10M12M16 Recommended tension loads: 1)NEmp- Concrete uncracked C20/25 - C50 Solid brick, brick and shear loads:VEmp- Concrete uncracked C20/25 - C50/60 2) Solid brick, brick and distance to edge for tension loadmm80100120160190cMin.

5 Distance to edge for shear loadmm100120160180260sMin. distance betw. anchorsmm120150180250290hminMin. thickness of foundation mm7080100120190hefEffective anchorage depthmm4243506298dsFor screw- M6 8 101216 TinstTorque at anchoring in at anchoring in solid brick, brick and sandstone hole depthmm556585105145d0 Drill hole- in the building materialmm1214162025dcutMax. drill cut- in the attached partmm79121418lAnchor lengthmm45506075115dnomAnchor- mm1214162025 shield anchor , steel MSS124060412408051241006124120712416111) Without infl uence of anchor and edge distance / safety factor: breakage of concrete 3, breakage of steel ) Shear load at use of screws with steel grade