Sikalastic -801/801 SL - İzonet

1 Product data Sheet2003-07 Sikalastic -801/801 SL 1/3 Sikalastic -801/801 SLLiquid Applied Synthetic Waterproofing MembraneConstruction241 Description Crack-bridging, one component, polyurethane based coating with low solvent content. Sika-lastic-801 is thixotropic, may be spray applied and is especially suitable for vertical areas (walls, parapets). Sikalastic -801 SL is self levelling and suitable for horizontal areas As crack-bridging waterproofing membrane for concrete and cementitious substrates. Especially suitable for soil covered structures such as: - Underground car parks, - Basement slabs, - Galleries, - Reservoirs, - Open cut tunnels, - Planter - Excellent crack bridging properties even at low temperatures, - Holohedral adhesion, - Waterproof, - Root resistant, - One component, - Suitable for airless reports LPM A-16531-1 EMPA Report N 125374/3 of DataColour Pebble grey RAL 7032 Density (20 C) 1,36 kg/lViscosity (20 C) Approx.

2 1100 mPa s (thixotropic), type SL flourableSolid content 85 %Shore A hardness (20 C) 65-75 Tensile strength > 4,5 N/mm2 Elongation at break > 280 %(20 C)Crack bridging at 2 mm Pseudo static > 3,0 mm (+20 C)coating thickness Dynamic > 0,5 mm (-20 C)Adhesive strength > 1,0 N/mm2 (concrete, Sika Primer 3)Water vapor diffusion < 1000resistance (mH2O)Skinning time ~ 1 hour (20 C and 50 % rel. hum.)Through hardening > 2 mm/day (20 C)speedStorage / Shelf life If stored in undamaged original containers in cool and dry conditions shelf life is at least 12 months from date of 12,5 and 25 kg pails (non-returnable)ApplicationSubstrate Mineral substrates, especially products of the EpoCem-range, must be clean, free from oil and grease, free of dust, laitance and loose particles. Adhesive tensile strength: > 1,5 N/mm2 Moisture content: max. 8 % Substrate preparation Blast cleaning with either high-pressure water jet or shot blasting, grinding or milling, followed by careful levelling Sikagard-720 EpoCem (vertical) as well as Sikafloor-81 EpoCem (horizontal 1,5-3 mm) layer and Sikafloor-82 EpoCem (horizontal 4-7 mm) may also be used as pore A thin coat of Sika Primer 3 must be applied by brush or roller to the concrete, resp.

3 EpoCem substrate (Caution: contains solvents, flammable). Material consumption: 100 - max. 200 gr/m2. Other substrates: - Construction steel 37: sandblast (grind), Sika Primer 35 - V2A-Steel, WN : sandblast (grind) Sika Primer 35 - Galvanised steel: light grinding, Sika Primer 35 - Copper: clean, Sika Primer 35 - Aluminium untreated or anodised: light grinding, Sika Primer 35 in a thin layer - Rigid-PVC: clean, Sika Primer 15 - Sikadur Combiflex Adhesive: clean, Sika Primer 15 Sika Primer 15 and Sika Primer 35 must be left to dry for at least 1 hour (at temperatures below +15 C: 2 hours). Sikalastic -801/801 SL 2/3 Construction242 Technical data sheet and label instructions have the explanations given in the data sheet are correct and reliable as far as we know and they are in connection with our documentation. In case of applications beyond our control, our warranty is only valid in respect of the quality of the sold product.

4 Our company reserves the right to make changes to the product formulations under the light of our new R&D studies. This technical data sheet is valid until a new one is printed and supersedes all of the former editions. ISO 9001 Accredited by theDutch Council forAccreditationISO 9001 TGA-TR GERGE MEINCHAFTF R AKKREDITERUNG GMBHTGA-ZM-02-92 Sika Yap Kimyasallar am eflme Mah. Sanayi Cad. Kaynarca 34899 Pendik / stanbulPhone: +90 216 494 19 90 Fax: +90 216 494 19 84 web: Directorates: Adana Ankara Antalya Bursa zmir TrabzonPhone : 0322 458 84 27 0312 482 06 06 0242 247 60 07 0224 225 63 80 0232 469 91 14 0462 326 14 73 Fax : 0322 458 04 05 0312 482 65 59 0242 241 95 92 0224 225 63 52 0232 459 34 66 0462 326 14 03 ApplicationWaiting times 1. Between Sikafloor-/Sikagard EpoCem and Sika Primer 3: at 20 C min. 24 hours, at lower temperatures at least 48 hours.

5 2. Between Sika Primer 3 and Sikalastic -801: at 20 C at least 2 hours, at lower temperatures at least 4 hours. 3. If coating is to be covered with mortar: allow to cure/harden for at least 5 of Spread unthinned material (do not stir) with tooth trowel or apply with airless spraySikalastic-801 equipment. Only airless spray equipment with a powerful piston pump are suitable.(thixotropic) Operating pressure 180 bar, nozzle 26/40 or 31/50 or 36/50. In combination with protective mortar or terrazzo tiles: Sikalastic -801 is to be applied at approx. 2,5 mm thickness (3,5-4,0 kg/m2) and to be blinded immediately with Sikadur-509 or Sikadur-501 quartz sand. If Sikalastic -801 SL is being used: first layer (2 mm thick), followed by a thin second layer which is to be of Pour onto the area to be coated, evenly distribute with tooth trowel, level and detrainSikalastic-801 SL entrapped air with spiked consumption For a medium dryfilm thickness of 2 mm approx.

6 3 kg/m2 Sikalastic -801 are Airless spray equipment with Sika Thinner 12. Common application tools with Sika Thinner 12 or Colma Cleaner. Caution: Colma Cleaner or other solvents may impair curing of - Moisture content of substrate: max. 8 % - Air-and substrate temperatures: min. +5 C, max. +30 C - Max. rel. humidity of air: 80 % - Observe dew point! - Do not apply in direct sunshine, but whenever possible when temperatures are dropping - Do not use inside of buildings - Not suitable for overcoating with bitumen mastic or hotmix asphaltSafety InstructionsSafety precautions Only use in well ventilated areas. Wear suitable protective clothing (gloves and goggles) Sikalastic -801 /-801 SL as well as Sika Primer 3 contain flammable, volatile liquids, there-fore, keep away from flames, do not In liquid state, Sikalastic -801 is a water contaminant. Do not allow to get into sewer, waters or soil.

7 Leftover Sikalastic -801 in liquid or hardened state must be disposed of properly according to local legislation. For detailed information please ask for the DIN safety data Class 4 under the relevant Swiss Health and Safety Codes. Observe warning on SL 3/3 Construction24306